HyperSynes PRO10-1 Smart Wireless BBQ Thermometer User Manual
- June 6, 2024
- HyperSynes
Table of Contents
HyperSynes PRO10-1 Smart Wireless BBQ Thermometer User Manual
Product Description
Download the APP
Search the keyword “ ToGrill” in Appstore or Google Ploy, or scan the
following QR code with your phone.
Download and install it for free.
Make sure your phone meet the requirements:
iPhone 4S, and later models: iPod touch With, iPad 3rd generations and later
models, all ipad mini;
Android devices running version 4.3 or later. with blue-tooth 4.0 module.
Power ON/OFF
Press and hold the button for more than 3 seconds when it is in OFF mode. it will be powered on. And the LCD display will show ‘ON’. If you do the same when it is in ON mode. it will be powered off. When there is no probe inserted in the device, it will powered off automatically.
Activate device and pair with your phone
-
Switch on your device and keep the blue-tooth switch of your phone on.
-
Activate Device: the app. and follow the device: instructions in the app to activate the device.
Use ToGrill App to Scan
-
Pairing:
-
Press the ‘get start’ button on app
-
Chose the product you have on app
-
Press the Pairing/Stop Alarm Button ( on the top of the device)
-
Connected successfully.
Once Paired the device with your phone. you don’f need to do it again, unless you change to other phones.
Screen introduction
Put in the Battery
2 AA size batteries are needed for this device. Make sure they are put in the right direction by following the icons on the unit.
-
Slide the bottery cover to open.
-
Put in batteries, noticing the icons which show directions.
-
Slide back the battery cover.
Install the probes
The device will keep scanning the sockets when its power is switched on, the Probe icons on LCD will display one by one from 1 to d where probes are plugged in.
Then insert the probes into the food, make sure the front tip of the probe is in the center of the food to get accurate temperature.
Enjoy your barbecue time
Choose food type and preference for the food where each probe is inserted. the app and the device will display its current and target temperature.
When the food is ready. the app and the device will alarm.
The user interface of the app may be changed when upgrade. Please follow the instructions in the app.
Probe color configuration
It’s difficult for you to distinguish different probes when you have several probes in using in the same time.
The app provides 6 colors for each channel, which enables users set them to be
identical to the color of the probes.
The probes come in 6 colors as well.
WARNING
The heat resistance varies in different components of the probe,
DO NOT put the probes directly in fire flame.
DO NOT put the wrap into oven, or it will melt! And probes are NOT dishwasher
safe.
Attention: Temp Probes above for reference only,subject to the actual probes .
Operation applies to the following two conditions:
(1) This device may not cause interference; This device must accept an
interference. including interference that may cause undesired operation of
this device.
App Store is a service mark of Apple lnc.
Google Play is a service mark of Google Inc.
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or on experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>