Lenovo Legion S600 Gaming Station User Guide

June 6, 2024
Lenovo

Lenovo Legion S600 Gaming Station

Important information

Lenovo Legion S600 Gaming Station Fig1

  1. The wireless charging coil of the Gaming Station is located beneath the logo. Ensure that the wireless charging coil of your Qi-enabled device and the logo are aligned while charging.
  2. Wireless charging speeds may vary by devices and the environment. Refer to the charging standards of your Qi-enabled device for the actual wireless charging condition.
  3. Do not place foreign materials such as metal objects and magnets between your Qi-enabled device and the Gaming Station while charging.
  4. Reconnect the power adapter and the USB-A to USB-C cable if your USB device doesn’t work properly

Gaming Station status/LED status

  • Plugged in Solid white
  • Qi Charging Solid amber
  • Abnormal/FOD (foreign object detection) Blinking red

Compliance information

The latest compliance information is available at: https://www.lenovo.com/us/en/compliance

Electromagnetic emission notices Federal Communications Commission (FCC) Supplier’s Declaration of Conformity The following information refers to the Lenovo Legion S600 Gaming Station, model: L01WC001-CS-H. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Qi and the Qi logo are trademarks of the Wireless Power Consortium. USB-C® is a trademark of USB Implementers Forum. All other trademarks are the property of their respective owners.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Lenovo User Manuals

Related Manuals