Topchances 4G 1.4inch Kids Smart Watch User Manual
- June 6, 2024
- Topchances
Table of Contents
Topchances 4G 1.4inch Kids Smart Watch
Kids Smart Watch User Manual
Prior to using this product, please read the manual carefully for correct installation and fast use. Colors please refer to the real product.
**Preparation before using
**
Please check to see if the product is the right model with complete accessories. Please use the Nano SIM Card which supports 4g network. Details please consult with your local operator. (please turn off the unit before inserting the card) The SIM card needs to be activated with the GPRS function and the caller ID display function. Install the APP on the mobile phone. For the APP details please ask your distributor for a Bar code or QR code
Insert Nano Sim Card
Please use a Nano SIM card that support4 the g network. This card needs to be activated caller ID, GPRS data traffic Internet access function, and call function. Note that in the case of breaking the sim card, please insert the sim card under turn-off state.
Turn on/off
Power on: When the watch is turned off, press and hold the power button to turn it on. Shutdown: Under normal working conditions, the watch can only be shut down remotely by the app or enter the setting interface. If the watch does not have a card installed or is not connected to the app, you can enter the settings interface to shut down. Be careful not to remove the sim card directly when the watch is turned on to prevent the card from being burned out.
Watch introduce
Button operation instructions: Power button:
- when the watch is off, long-press the power button to turn on
- The watch is connected to the Internet and the app sets the SOS number. Press and hold the number to dial 3 numbers. If no one answers, dial Loop twice. Back button: short press to return to the previous interface
Download APP
Scan the QR code to download the watch app.
The APP QR code can also be found in the app download interface in the watch.
Registration and login
Follow the instructions of the APP to properly register an account and log in.
Bind the watch with the App account
After the account is successfully registered, the watch is bound, scan the
registered QR code attached to the watch, or manually input the 15-digit
registration code. If the registration bar code of the watch sticker is lost,
the registration code can be found in the watch app download interface. Then
enter the binding settings
Introduction of some functions
-
LBS, GPS, WIFI positioning: to view real-time location from APP map Footsteps: View historical tracks Safety area: 3 safety fences can be set, and there will be an alarm notification when the watch leaves the fence. Alarm: 3 sets of alarm clocks can be set Address Book: The watch can be set up with 15 phone numbers and the watch can make calls to each other.
-
We chat: Tap to go and chat with the app, you can send voice and pictures to the phone. Note: The watch cannot send information to the mobile app, and the mobile app can send information to the watch.
-
Camera: Click to take a photo or video or open the back cover to automatically turn on the camera
-
Dial: The watch can dial autonomously, and the app can turn the feature on or off.
-
Video call: Click to go to select single chat or group chat of video chat with APP. Group chat can be up to 8 people together.
-
Gallery: Click inside to see the photo taken by the watch. Photos can be shared, deleted, and modified.
-
Settings: volume settings (media volume, alarm volume, ringer volume, call volume) Brightness setting, hibernation, restart, shutdown, device information (wireless upgrade, model number, version number, IMEI) Desktop style (single square, four squares), Cleanup tool (clean up background application, clean cache) More (Bluetooth, Flashlight, Mobile Network, Date and Time Settings, Language).
-
QR Code:
- Scan code download: Click to display the QR code, scan code to download the APP.
- registration code: display device registration code.
-
crazy math: click into the interface to start the game by clicking “Start”. The difficulty of the game is divided into three levels: “simple, general, and difficult”. You can set it by clicking the Settings button on the interface.
-
the curriculum: click to go to see the course from Monday to Friday Set by the APP
-
Touching friends: Click to enter the interface, two watches touch to make friends after the friend is successful, the picture will light up.
This model can be used to make up to four friends. Click on a friend’s avatar to chat with your friends and send voices and pictures to your friends. Long press on the message sent by the friend to “delete” and “delete all”. Long press “Friends Image” to delete your friends. -
SOS: Set 3 emergency contact numbers. The watch alarms by pressing the SOS button for 3 seconds in an emergency, and dials 3 numbers cyclically. When no one answers, the circular call ends.
-
Remote monitoring: setting on APP, the watch actively dials the set number (usually the parent number), and the mobile phone can realize the oneway listening to the watch and know the circumstance around the child
Prohibit to use: Three-time periods can be set, and the watch blocks all calls and other sounds during the time period (valid from Monday to Friday) SMS reminder setting: can control whether the watch opens the SMS function of related alarm information (SMS normal charge) -
Family members: Shows all family member accounts that have been bound to the watch.
-
Working mode: 3 working modes, default normal mode.
-
Desktop style: Single square: After switching to 4 squares, slide left on the main interface to edit the desktop function display. Four squares: the main interface can’t slide left /right Remote shutdown: the watch can be remotely shut down by the app after the watch is turned on.
Troubleshooting
The watch cannot be connected to the server when it is turned on for the first time. Please check:
- Is the SIM card inside the watch is 4g?
- Whether the SIM card in the watch is activated for data traffic.
- Whether the server parameters are IP and APN, and the IMEI is correct. It must be ensured that the IMEI barcode of the watch is the same as the IMEI written into the watch when produced. Customers can edit the text message PW, 123456, ts# to the watch by mobile phone. (The watch must be loaded with a card, the text message must be entered in the English input method). if any problems, please ask your local distributors for help.
- There are two cases that can’t be registered.:
- The device number does not exist or the device number was registered. You must ask your distributor
- If display the account has been registered, the customer can register again by changing to another account.
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may
cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This Smart Phone meets the government’s requirements for exposure to radio
waves. The guidelines are based on standards that were developed by
independent scientific organizations through periodic and thorough evaluations
of scientific studies. The standards include a substantial safety margin
designed to assure the safety of all persons regardless of age or health. The
SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue for front
of the face and 4.0 W/kg averaged over 10 grams of tissue for the wrist.
Device types: T5 (FCC ID: 2AKM6-T5) has also been tested against this SAR
limit. The highest SAR value reported under this standard during product
certification for the Front of the face is 1.383W/kg(separation distance is
10mm) and when properly worn on the Wrist is 2.035W/kg(separation distance is
0mm). The use of belt clips, holsters, and similar accessories should not
contain metallic components 25 in its assembly. The use of accessories that do
not satisfy these requirements may not comply with FCC RF exposure
requirements and should be avoided.