SCIENCE CAN Block Circuit Deluxe Kit User Manual
- June 7, 2024
- Science Can
Table of Contents
SCIENCE CAN Block Circuit Deluxe Kit
PARTS LIST
Warnings & Cautions
WARNING CHOKING HAZARD-SMALL PARTS. NOT FOR CHILDREN UNDER 3 YEARS.
WARNING : All PACKAGING MATERIALS.SUCH AS TAPES. PLASTIC SHEETS, BINDING
WIRES AND LABELS, ARE NOT PART OF THE PRODUCT AND ARE NOT SUITABLE FOR
CHILDREN TD PLAY WITH. FOR THE SAFETY OF YOUR CHILD, PLEASE HANDLE PACKAGING
MATERIALS PROPERLY. THE USER MANUAL CONTAINS IMPORTANT INFORMATION. PLEASE
KEEP IT FOR LATER USE.
CAUTION , ADULT SUPERVISION REQUIRED.
- THE PRODUCT IS INTENDED FOR CHILDREN AGED AND ABOVE.
- WRONG WIRING OR SHORT CIRCUIT MAY CAUSE TI-lE PRODUCT TO MALFUNCTION.
- IMPROPER USE, SUCH AS SOAKING AND HEATING, CAN DISABLE THE INTERNAL PROTECTIVE CIRCUIT OR CAUSE AN ABNORMAL REACTION, RESULTING IN OVERHEATING, SMOKING, DEFORMATION, OR COMBUSTION.
- NEVER SUBSTITUTE PARTS.
- DO NOT DISASSEMBLE OR MODIFY ANY ELECTRONIC BLOCKS, ANY MODIFICATION MAY CAUSE DAMAGE OR OVERHEATING OF THE BLOCK
- STOP USING THS PRODUCT IF THERE IS ANY DAMAGE OR BROKEN PARTS.
WARNING : BA ITT RIES ARE TO BE INSERTED WITH THE CORRECT POLARITY (+AND-). DO NOT MIX DIFFERENT TYPES OF BATTERIES OR NEW AND USED BATTERIES .NON-RECHARGEABLE BATTERIES ARE NOT TO BE RECHARGED.RECHARGEABLE BATTERIES ARE ONLY TO BE CHARGED BY ADULT.RECHARGEABLE BAITTRIES ARE TO BE REMOVED FROM THE TOY BEFORE BEING CHARGEDJHE SUPPLY TERMINALS ARE NOT TO BE SHORT- CIRCUITED.REMOVE BATTERIES FROM THE TOY WHEN NOT IN USE FOR EXTENDED TIME OR WHEN BATTERIES BECOME EXHAUSTED.BATTERY INSTALLATION BY AN ADULT 15 REQUIRED. DISPOSE OF BATTERIES RESPONSIBLY.DO NO DISPOSE OF IN FIRE.
Battery Installation
- Make sure the switch is off, open the battery box at the bottom of the base with a screwdriver (not included).
- Insert three new 1.5V AA batteries (not included) into the slot with the correct polarity(+/-).
- Put on the cover and tighten the screw.
Maintenance
- Wipe the outside of the main machine with a soft dry doth to keep the machine clean.
- Avoid direct sunlight and keep ‘f!N8.Y from any heat sources.
- Remove lhe battery, when not in use for a long period of time.
- Avoid confiding with hard objects and disassembling.
- Do not immerse the main machine in water and avoid damp environments.
Common Trouble Shooting
If for any reason the host stops responding, please follow these steps:
- Switch off the host.
- Remove the battery to interrupt the power supply.
- Leave the machine for several minutes and then reload the battery.
- Reboot and tum on.
- If the machine is still not working.please install new batteries.
Introduction of basic functions
Always make sure that the positive and negative Lil. poles are connected correctly.
The positive pole (+) of the power supply block should be connected to the positive pole of other blocks, and the negative pole(-) of the power supply block should be connected lo the negative JX!le of other blocks.
Transparent base plate
Every block can be fixed onto the transparent base plate.
Type C cables
The set is equipped with two different cables. As you acquire more knowledge,
you can choose the cable that best suits you to assemble with.
Note : Please read the following information carefully before start the experiments.
- Connect the cables only as instructed by the illustration manual.
- Do not short-circuit the batteries (do not connect a wire to both ends of the power supply block)
- Do not plug the cable into any socket in the house.
- The cable is not for charging and data transmission, for this product use only.
Introduction of blocks
Power supply block
Three 1.’51/ AA batteries is required.
Please refer to battery installation in P.5
Resistor block
Resistors can limit the amount of current flowing through a circuit.
Press to turn on and off of the block.
Website: http://www.toptfighttoys.com