Artico SY.CL420 Portable Air Cooler User Manual

Artico SY.CL420 Portable Air Cooler

 **User Manual**

Welcome

Thank you for purchasing the new Portable evaporative Air cooler Artico SY- CL420, in order to fully benefit from this product, please
read this user guide carefully before using the product. It contains important information for your safety as well as use and maintenance advice, Keep this user guide for future reference. If this product is passed to a third party, this user guide must be included.

Important safety instructions

WARNING: When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electrical shock and personal injury.

• Use this cooler only as described in this manual. Other use not recommended may cause fire, electric shock or injury to persons. This will also void your warranty.

• You air cooler operates with a voltage of 220- 240 VCA, 50Hz. Make sure before connecting the unit, the power source voltage and frequency coincide with the indication on the rating label of the cooler.

• Do not operate product with a damaged cord or plug.

• DO NOT pass the cable under the carpeting, or cover it with carpets or rugs.

• We recommend not to use extension cables with this product.

• Keep the cable away from areas where anyone can easily access in order to avoid tripping.

• Always unplug the cable from the power outlet before filling up the water tank.

• Always unplug the appliance from the power outlet before cleaning, performing any maintenance or relocating it.

• To disconnect the unit, first turn it OFF, grip the plug and pull it. Never pull the plug by the cord.

• Do not operate the appliance in areas where gasoline, paint or other flammable materials and objects are stored.

• When using the “COOLING” function, check that the water tank is full. Operating the air cooler in “COOLING” mode with the water tank empty can cause the water pump to malfunction.

• DO NOT attempt to repair or adjust any electrical or mechanical element of the portable air cooler, as it may void the warranty.

• DO NOT cover the air inlets or outlets of the appliance as it may cause motor damage. Ensure adequate ventilation around the unit.

• DO NOT insert or allow objects to enter through ventilation or exhaust openings, as this may damage the product and could cause an electric shock or fire.

• Do not use the portable air cooler without the honeycomb filter, as it will overload and damage the motor.

• DO NOT leave the appliance running unsupervised for a long period of time.

• DO NOT expose the product to dripping or splashing water.

• DO NOT expose the product to direct sunlight or extreme heat.

• DO NOT place objects filled with water (such as vases), burning objects (such as candles) or heavy objects on the product.

• DO NOT allow children to play with packing materials or plastic bags.

• If the unit is damaged or malfunctioning, do not use it. Check the troubleshooting section and contact the brand’s technical service department.

• This product is intended for indoor; household use ONLY. Do not use outdoors or for commercial or industrial purposes.

• Do not use this product in the immediate vicinity of water, such as bathtubs, washbowls, swimming pools etc. where the likelihood of immersion or splashing could occur.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

• This product is not a toy! Children should be supervised to ensure that they do not play with the appliance.

• Turn the unit OFF and unplug it from the outlet when not in use, when moving the unit from one location to another and before cleaning. Fully assemble the unit before switching on again.

• Place the unit on a dry level surface to avoid overturning.

• Do not operate if the product housing is damaged.

• Never install or store the unit where it could be subject to:
  1. Heat sources such as radiators, heat registers, stoves or other products that produce heat
  2. Direct sunlight
  3. Mechanical vibration or shock
  4. Excessive dust
  5. Lack of ventilation, such as a cabinet or bookcase
  6. Uneven surfaces

• The fan must be fully and properly assembled before use.

• It is recommended to change the water in the water tank every 24 hours. It is also recommended to empty the tank and wipe it thoroughly with sanitizing wipes on a regular basis.

• The water level of the tank shouldn’t exceed the maximum level, and shouldn’t be lower than the minimum level when the cooling/humidification  function is turned on.

• After water is filled, do not tilt or attempt to move the air cooler in order to prevent water splashing.

• If the product has been knocked over, immediately pull the plug from the outlet, set the air cooler vertical, or in its correct position and wait for 24 hours before starting.

Electric security

• Check carefully at the portable air cooler voltage before plugging it into the outlet. This device is not dual voltage.

• Plug the portable air cooler into an exclusive outlet and in perfect condition to avoid overloading the mains.

• Even when the ON / OFF button is in the Off state, there is a risk of electric shock. Therefore, disconnect the device when it is not being used.

• We do not recommend the use of any extension cable or adapter. If any should be used follow the following requirements:
  1. The cable length should be as short as possible because a long cable can cause overheating and cause someone to trip.
  2. Never use an adapter for more than one connected product.

• A loose fit between the AC outlet (receptacle) and plug may cause overheating and a distortion of the plug. Contact a qualified technician to replace loose or worn outlet.

NOTE

This appliance must be serviced only by qualified service technicians.

PRECAUTIONS

Risk of electric shock. Touching any of the internal components can cause serious personal injury or death.
Do not disassemble this unit.
To avoid overheating, do not cover the appliance. The air conditioner should not be positioned immediately below an outlet.

Intended use

• The evaporative air cooler is not an air conditioner as it does not use a compressor or refrigerant gas. It should not be expected to cool as efficiently as a refrigerated air conditioner
  This product is intended to cool and humidify the air within the domestic environment.
  It is not intended for commercial or industrial use.

• This product is designed to cool, humidify and dehumidify the air contained in a domestic environment.

• This product is not designed for commercial or industrial use.

Product overview

1. Superior water tank cover
2. Superior water tank
3. Ice boxes
4. Pressure frame
5. Inferior water tank
6. Air inlet cover + filter
7. Drain plug
8. Castors

Control Panel:

Swing – Oscillation function:

The louvers automatically swing from left to right and back and the vertical wind direction can be set manually.

Cooling function:

Press the “COOLING” button for a cool breeze when water is added into the water tank.
Press once more to turn off the cool breeze function.

Speed level:

Press the “SPEED” button to adjust the desired fan speed level. There are 3 positions: Low, Medium or High.
Turn the button to 0 to off the unit.

First use

Before first use.

1. Before using the air cooler for the first time, remove all packaging material, polybags and store them in a safe place.
2. Check that the unit is in perfect condition and that no parts are missing.
3. Spread a soft cloth or mat on a leveled floor. Carefully place the unit upside down on the soft cloth or mat.
4. Verify the wheels are properly integrated.

Filling the water tank

Before use, follow the procedure explained below to fill the water tank with clean, cold water up to the ‘MAX’ level indicated.

Important:

• Do not use water with any chemical additives added. The water must be cold or lukewarm, do not use hot water above 40°C.
• Make sure the cooler is switched off before adding water to the tank.
• When adding water from the superior water tank, please pay attention to check the water level of the inferior water tank, as the water filled from top water tank will flow to the bottom water tank.
• Do not fill water above the ‘MAX’ line on the front of the water tank.

Superior water tank:

1. Open the top cover water tank.
2. Fill in clean, cold water into the water tank.
3. The water will flow directly to the bottom water tank.
4. Check the inferior water tank and make sure the water is not below or above the minimum and maximum levels.
5. Check the below picture for minimum and maximum water level.

Note : It is important to check the inferior water tank level while filling in the water from the superior water tank. Make sure it is above or below the levels indicated.

Inferior water tank:

1. Water can also be filled directly into the inferior water tank.
2. Slide out the water tank cover. The water tank cannot be removed completely.
3. Fill in clean, cold water into the water tank, taking care not to overfill above the ‘MAX’ line.
4. Carefully replace the water tank in its position, ensuring that the water cover is closed.
5. Make sure to close the cover after replacing the Water Tank, or else the unit will not work.

Note : It is normal for the air cooler to have a slight odour or for the water stored in the water tank to have a slight discoloration during
first use.

USING THE ICE BOXES

Two ice boxes have been included for extra cooling effect, if desired.

To use the ice boxes, simply place the Ice Boxes in your freezer for a few hours before placing them in the water tank.

Operating the unit

Warning:

• Make sure that the castor wheels are well installed before switching on.
• Once water is filled, take extra care to ensure that you don’t tilt the unit.
• Push the unit gently if you wish to move it to a new position.
• Before turning on the cooler, please ensure the swing and cooling buttons are turned off.

1. Keep the unit on a flat, stable ground without any obstacles near it.
2. Connect the power plug to a suitable electrical outlet with the same specifications as mentioned in the unit’s rating label (see Technical Specifications for details).
3. You may now use the control panel buttons to operate the cooler.

Functions

The new evaporative air cooler SY-CL420 integrates better cooling effect as it pumps the water and makes it flow from the inferior water tank to the top water tank, hence creating a better cooling effect. It is recommended to place the 2 ice boxes on the superior water tank so when the water runs from down to up and flows back it can generate colder air.

1. Cooling
   This evaporative air cooler is built to maximize energy efficiency.
   Warm air is drawn into the cooler through a dust and odor-reducing filter which enters the honeycomb cooling filter. Water is then pumped from the tank, pours over the honeycomb filter. As the warm air passes through the filter, the water absorbs the heat naturally, cooling and humidifying the air. A fan propels the cooled air out into the room. This no-compressor system cools naturally and efficiently.
   The recommended maximum relative humidity level is 60% or less, which allows a noticeable temperature decrease. The temperature decrease will be greater in drier climates because higher evaporation occurs when the humidity is low. The evaporative air cooler should not be used in closed spaces. The room should have doors and windows opened to allow free air flow. The evaporative air cooler works best when placed near an open window, so that outside air is drawn into the evaporative air cooler, the air circulates in the room and then exits via the door. 
   

2. Humidifier
   The evaporative air cooler can also be used to humidify dry air during cool weather. To use the humidification function, the
   windows and doors should be closed to allow the humidified air to accumulate.

3. Air purifier
   The filter removes tiny dust particles and cigarette smoke and constantly filters the air to provide a cleaner and healthier environment.

4. Oscillation (Swing)
   The louvers automatically swing from left to right and back and the vertical wind direction can be set manually.

5. Speed settings
   Speed between three fan speeds of 8.8m/s, 7.8m/s and 6.8m/s

6. Energy saving
   This product uses water as its media and physical ways to cool down the temperature. The water tank capacity lasts a long time and the power consumption is only 65W (only 5% compared to an air-conditioner)

7. Cleaning
   The water tank can be easily pulled out and cleaned with a damp cloth.
   

Cleaning and maintenance

Caution:

• Always switch off and unplug the unit before removing the filters or performing any cleaning.
• Do not use harsh detergents, chemical cleaners or solvents as they may damage the surface finish of the plastic components.

MAIN BODY

1. Use a soft duster or a rag to dust off all the surfaces.
2. Clean the Air Inlet and Air Outlet using a vacuum cleaner regularly.
3. Wipe all the parts with a soft damp (not wet) cloth dipped in mild soapy water.
4. Use a dry cloth to thoroughly dry the unit before turning on.

Caution : Ensure that water doesn’t get inside the unit.

AIR INLET COVER AND INNER FILTER

1. Remove the air inlet cover by pulling it outwards.
2. Remove the honeycomb filter
3. Use a duster to gently dust off the Inner Filter.
4. Wash the filter if necessary, using a mild detergent and a soft brush.
5. Make sure to dry the filter before reinstalling it.
6. Replace the Inner Filter and Air Inlet Cover and make sure it is well fixed in its position.

WATER TANK

• In the case you do not use the Cool function for a long period of time, remove the water from the water tank.
• Slide out the water tank until its limit.
• Remove the drainage screw to let all the water run out.
• Use mild soap and water to clean the Water Tank.
• Allow it to air dry or wipe dry using a soft cloth. Make sure the Water Tank is completely dry before replacing. This helps prevent any mould or mildew inside the Water Tank.
• It is recommended to change the water every 24 hours or at least every 3 or 4 days.
• Clean the product regularly as dust and accumulated deposits may affect performance.

Note : Make sure the Air Inlet Cover and Water Tank are replaced in position before switching on again.

Technical specifications

Note : As a result of continual improvements, the design and specifications of the product within may differ slightly from the unit illustrated on the packaging.

Storage and disposal

If you do not plan to use the product for extended periods of time, it is recommended that it is cleaned and stored (preferably in its original packaging) in a cool, dry place.

This symbol means that in case you wish to dispose of the product once its working life has ended; take it to an authorised waste agent for the selective collection of Waste from Electric and Electronic Equipment (WEEE).

Declaration of Conformity

Manufacturer Name: Satyatrade S.L.
Address: Pol. Lnd. La Raya. C/Guadalquivir, 2. Camarma de
Esteruelas, 28816 Madrid
Tel: 902 430 967
Fax: 91 8864285
NIF: B83254763
Manufacturing country: China
Description: Portable Air Cooler
Artico ® SY-CL420 complies with the following directives:

EMC Standard: Directive 2014/30/EU
LVD Standard: Directive 2014/35/EU
ROHS Standard: Directive 2011/65/EU Restriction of Hazardous Substances

Signed: Ajeet Nebhwani Utamchandani Sole Administrator

www.sytech.es

References

• Sytech S.L.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>