Shenzhen Guilai Technology GW02 Folding Magnetic Bracket Fast Wireless Charger User Manual
- June 6, 2024
- Shenzhen Guilai Technology
Table of Contents
Shenzhen Guilai Technology GW02 Folding Magnetic Bracket Fast Wireless Charger
Thank you for choosing our product, which is a magnetic bracket wireless charging product, simple and elegant design, compatible with all QI standard mobile phones and have a wireless receiver device.The magnetic design of the receiving device allows you to position it more accurately and achieve the optimal charging efficiency. Before using this product, please read carefully the user manual!
Applicable devices
- Support QI standard wireless charging mobile phone devices;
- Support fast wireless charging mobile devices;
- Support equipment with receiving device;
Instructions for use
- GW02 is a dual-channel 15W+5W magnetic bracket wireless charger; the output power of the applicable adapter or charging head and cable should be20w;
- If the power of the adapter used is not enough or the cable does not meet the power requirements, it may cause charging abnormalities;
- After the product is connected to the power supply, the indicator light flashes quickly for 3 times and then turns off,means that the power supply has been switched on;
- During the charging process, the indicator light flashes slowly, means that it is being charged, and the indicator light is always on after full charge;
- GW02 dual 15W + 5W, one of the way with magnetic suction function, the charging indicator is blue. the another one without magnetic suction function,the charging indicator is green;
- The charging power of the product will be automatically matched with the mobile phone, the maximum charging power of each charger is 15W, and it is backward compatible: 5W/7.5W/10W
- After detected metal objects, the indicator light should always flash rapidly.
Specifications
1| Name| Folding magnetic bracket
Fast wireless charger
---|---|---
2| Model| GW02 (15W+5W dual charger)
3| Charging power| 15W + 5W
4| Input voltage| 5V/2A 9V/2A 12V/3A
5| Power interface| TYPE-C
6| Color| Gray space/Far peak
7| Folding angle| 0° ~ 180°
8| Best using angle| 30° ~ 75°
9| Working| -10℃ ~ 60℃
10| Storage| -20℃ ~ 70℃
11| Body material| Aluminum alloy
12| Panel material| Toughened glass
13| Product size| 127mm65mm9mm
14| Product weight| 200g
List of accessories
1
| Wireless charger|
*1
---|---|---
2
| Charging cable| *1
3| User manual|
*1
Matters needing attention
- Keep the wireless charger dry, away from water and any liquids. (If the product enters water, please disconnect the power supply immediately and do not use an external heat source to dry and discontinue use of this product);
- keep the appearance of the wireless charger clean, if you need to clean, please disconnect the power supply, use a soft flannel cloth to wipe, do not use detergent, spray ,cleaning products such as fog, solvents, alcohol, etc.;
- The product has a slight fever during use, which is a normal phenomenon;
- Please use this product in an environment of 0-45 degrees Celsius;
- Please use the charging cable that is standard in the product;
- Do not put any metal objects on this product;
- The surface of the product is made of tempered glass, please do not press the surface of the product;
Warning!
- It is forbidden to use or store the product in an environment of strong static electricity and strong magnetic field;
- It is forbidden to put it into microwave ovens, bake box and other utensils;
- It is forbidden to decompose or throw the product into the fire;
- It is forbidden to violently beat, throw to put and roughed up products, so as not to cause the internal structure and components damage, lead to products cannot be used;
- Children under 12 years old are prohibited from operating alone;
- Non-professional and technical personnel are prohibited from disassembling the product;
- If the product is damaged, please contact your dealer.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
RF warning for WPT device:
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. During the operation of device a distance of 15cm
surrounding the device and 20 cm above the top surface of the device must be
respected.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>