AllCall OllCOll S10 Smartwatch Instruction Manual

: June 6, 2024
: AllCall

Table of Contents

Appearance introduction
Charging and start up
APP download
Binding
Functions introduction
Common problem
Maintenance
Warranty card
Documents / Resources

OllCOll S10
User Instructions

Please refer to this manual before using
www.allcall.hk

Appearance introduction

◎The bracelet is made of healthy materials, please be assured to use.
◎Due to individual diﬀerences, if skin feels uncomfortable while wearing, please stop wearing and consult the doctor

Charging and start up

Please charge the product for more than two hours before use. Align the charging port with the metal contacts on the charging base until the charging indicator appears on the bracelet screen.

◎ Please use the special charging cable that comes with the package, Keep charging port clear and dry.
◎ Note: Do not use a power adapter with an output of more than 5V 1A to charge, otherwise the circuit may be burned, resulting in no charging.

APP download

https://app.help-document.com/gloryfit/download/index.html

Scan the QR code on the right with your mobile phone Or Go to APP Store to download and install GloryFit, Please give this software the corresponding permissions, to
ensure that the Bluetooth connection is normal.

Binding

Open the APP and add the bracelet device you want to connect to the APP. When binding, please conﬁrm that the Bluetooth addresses displayed on the APP and the bracelet are the same. (You can check the Bluetooth address of the bracelet in the bracelet settings)
When pairing, make sure that the Bluetooth of the mobile phone is turned on, and the bracelet needs to be close to the mobile phone to connect. After the pairing is successful, you can check the connection status in the pull-down notiﬁcation bar of the bracelet.

Functions introduction

The bracelet supports full-screen touch, slide up, slide down, slide left, slide right, long press, and other operations, slide the screen to switch to view various functions; you can
also, click and long-press the screen for related operations.
The bracelet supports functions such as exercise monitoring, heart rate monitoring, message reminder, etc.

Common problem

App can’t search the device Answer: Please try to press the device button ﬁrst, if the screen is not lit, you can connect the device to the charger to charge, to ensure
that there is power.
The device is repeatedly connected and disconnected Answer: Mobile phones of diﬀerent brands will automatically clean up the mobile phone background program. You need to add the APP to the mobile phone white-list or self-start management.
The device cannot be charged Answer: Is there any dirt, corrosion, etc. in the charging place? Only the full contact between the USB interface and the charging head can
charge successfully.

Maintenance

Do not wear bracelets for bathing, swimming, or other water activities
Do not expose the bracelet to a place with high moisture, high temperature, or low temperature for a long time
Can prevent such as living room, office, laboratory, light industry studio, storage room dust conditions, not suitable for special dust environment.
The bracelet has crashed and restarted. Please check the phone’s memory information to clear and try again, or quit the APP and open it again.

The company reserves the right to modify the contents of this manual without any notice. Some functions are diﬀerent in speciﬁc software versions, which is normal.