Jahy2Tech AP021C Wireless Video Microphone User Manual
- June 6, 2024
- Jahy2Tech
Table of Contents
Jahy2Tech AP021C Wireless Video Microphone
Features
- Original lightning connector, no more wory about 1OS ecosystem, and safe to use.
- three-in-one universal receiver, lavalier design, compact and convernient.
- 2.4G wireless transmission technology, stable transmission distance can be up to 120 meters.
- Real-ime monitoring, free switching of three volume levels.
- Three noise reduction modes can be switched freely, to meet acCurate pickup in any complex environment.
- Support i cara 1Ocal audio storage, no more worry about ie loss.
- The microphone can be used as a recording pen alone, and the recording can be saved synchronously anytime and anywhere in any environment.
- Microphone and receiver with 3.5 mm cable which is used for camera can last 12 hours continuous interviews.
- Equipped with a charging case, the transmitter and receiver are more convenient to store and charge; interviews,
- The charging case has a large battery of 2000mAh that can be recharged, which is the first choice for travel and make a Live.
APplications
Live, vlog, Video-shooting, Interview and others.
Packing List
- Charging case(two mic and one receiver) 1PCS
- MIcrophone transmitter 2PCS
- 3 in 1 Receiver 1PCS
- Audlo cable 1PS
- CHARGING CABLE 1PCS
- gcable 1PCS
- Earphone 1PCS
- Wind-proof User manual 2PCS
Specifications
Charging case
- input voltage: DC 4,8V-5,4V
- Charging time: 90 mins
- Battery capacity: 2000 mAh
- Recharge times: recharge 3 times for microphone and receiver
- Weight: about 128.2g
- Charging case size: 111 79″34.4mm
Microphone specification
- Frequency: 2,4GHz
- Battery: 230mAh
- Latency: 25 ms
- Working time: 12 hrs every spots range. 20-20KHZ
- Charging time: about 80 mins DC: 4.8-5.4V
- Weight: about 14g
- Sensitivity: -26 dBFS S/N
- Ratio: 64 dB
- Microphone size: 4/.1 15.04 15.61mm
Receiver Specification
- frequency: 2.4GHz
- Battery: 230mAh
- Latency: 25 ms
- Working time: 12 hrs
- Frequency response range: 20-20KHZ
- Charging time: about 80 mins
- DC: 4,8-54V
- Microphone size: 47.5″13.47″7.95mm
- Weight: about 18.7g
Functions
- Charging case indicator light
- Indicator light on the receiver
- Type-C charging port
- Lightning receiver
- 3.5mm monitoring port
- Power IMute key 2 43.5 mm adapter cable port
- Indicator light on the microphone “2
- 1ype-C receivers
- Reset key on the transmitter 2
- Power Reset button
- TF memory card slot 2
- Volumelnoise key
Microphone transmitter functions
RECEIVER FUNCTION
Charging case specification
NOte. Ine Ih card will automatically save a new recording me every time, the capacity or the memory card is Tull, tne oldest recording ile will De dutoaucaly deleted.
Connection instruction
After taking out the device, the indicator lights of the microphones on the receiver and transmitter are always green, it is paired successfully.
Mobile phone connection instruction
Plug the Lightning receiver/Type-C receiver into the Lightning port/Type-C port of the mobile phone, and the green light of the receiver is always on, and the microphone can be used to pick up sound.
Camera connection instructions
Plug the 3.5mm cable into the receiver and the 3.5mm hole of the camera respectively, the green light of the receiver is always on, and the microphone can be used to pick up sound.
Windows Notebook Operation
Turn on the receiver and connect the TPYE-C port to the TPYE-C jack of the computer, or insert the 3.5 adapter cable to the audio input jack, click the speaker con at the bottom right or the computer, and tnen open the Sound settings Sound setting option and then dick the bottom of the page to select “voice Ihpur’ option, select the corresponding “Microphone option to Confirm. lick
Desktop Windows operation
Turn on the receiver, plug in the 3.5mm adapter cable to the audio input port of the host computer, dlick the “Speaker” icon at the bottom right of the computer, and then open the sound settings, the “Sound” setting option, and then click the “Sound Input” option at the bottom of the page, and select the corresponding “Microphone” option to confirm.
MacBook operation
Turn on the receiver and connect the TPYE-C port to the TPYE-C socket of the MacBook. On the MacBook, select the “Settings” option, then click the “Sound”, then select the “Sound output” option, click to select “Speaker”, and then confirm; then select the “Sound input” option, cick to select “Microphone -Wireless microphone. Click Confirm to use.
Turn on OTG (only for Android system)
Take the OPPO A72 model as an example
Instructions for installing the receiver to the camera
Before installing to the camera, use the receiver’s back clip to clip on the camera shoe and then fix it.
Wool cover installation instruction
Align the plastic buckle of the wool cover with the groove of the transmitter, insert it and then rotate 90° clockwise to fix it.
Label Meanings
According to the test results obtained based on RL2004/108/EG (Electromagnetic Compatibility Directive) and RL2006/95/EG (Low Voltage Directive), this product complies with the limits specified in the European Community EMC (Electromagnetic Compatibility) Directive, integration of relevant laws from its member states. FC Changes or modifications not expressly approved by the complying party may cause the user to lose permission to operate the device. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. This symbol indicates that,according to the WEEE (Waste of Electrical and Electronic Equipment)Directive(2012/19/EUP) and national laws, this type of waste should not be discarded along with your household waste,as it contains potentially hazardous substances that may pose a negative impact on the environment and human health. It should be handed over to an authorized WEEE collection facility for recovery and recycle. Herewith you will be helping effective utilization of natural resources. For more information on the disposal of WEEE products, please contact your local municipality, waste management bureau or household waste disposal service.
Safety Instructions
To avoid electric shock, overheat, fire, radiation, explosion, mechanical risk and injury or property loss due to improper use, please read and observe the following items before use:
- Please check if the power of the connected equipment matches with that of this product before operation.Adjust the volume to proper level during operation.Do not operate at over-power or high-volume level for extended time to avoid product malfunction or hearing impairment.
- If there is any abnormality during use (e.g., smoke,strange odor).please kill the power switch and unplug trom power source, then send the product to the local dealer tor repair.
- Keep this product and its accessories in a dry and ventilated area.Do not store in a humid or dusty area for extended time. Keep away from fire, rain, liquid intrusion, bumping, throwing.vibrating.or from blocking any ventilation openings, to prevent malfunction.
- Please abide by safety rules during operation.Do not use the product in places prohibited by laws or regulations to avoid an accident
Do not disassemble or repair the product by yourself to avoid injury. If you have any questions or require any services, please contact our local dealer. About This Manual This manual contains up-to-date technical specifications as of printing. However specifications contained herein may not conform to your particular product since Takstar is constantly improving its products. For the latest version/more information please vist our website: https://www.takstar.com/. Specifications, devices or accessories available may vary from region to region.it you have any questions,please contact our local dealer.
FCC Requirement
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>