Shenzhenshi Shenzhijia Electronic P4-3 Wireless Controller User Guide

Shenzhenshi Shenzhijia Electronic P4-3 Wireless Controller User Guide

Product description

This product is a P4 handle, which belongs to wireless Bluetooth control handle (using wireless Bluetooth technology).It can remotely control the handle, which is easy to operate. It can be used for P4 host, P4 PRO and P4 SLIM. At the same time,PC games such as PC and x-input(PC360) are also supported.

Product parameter

Voltage: DC 3.4-4.5V Charging time: 2-3 hours
Working current: < 55mA Vibration current: 80-100mA
Sleep current: 0uA Charging current: ＞350mA
Battery capacity: 600mAh USB length: 1m
Usage time: 10-12 hours Bluetooth transmission distance：＜10m
Weight: 221.6g Size: 16.0 x 13.0 x 6.0cm

Key composition

The handle consists of 22 standard keys(PS,Share, Option, ↑, ↓, ←, →, , , , ,L1,L2,L3, R1,R2,R3 ,VRL,VRR,RESET，Turbo，Clear),and
Two analog 3D rockers

Match and connect

• When you use the handle for the first time, you need to connect it with the current host: first, use the USB cable to communicate with P4 host, then press the HOME button of the handle, the LED light bar will always light i n one color, and then the host will be connected.

• When the handle is connected to the host, the LED light bar flashes white, and then keeps one color always on. At this time, you can remove the data cable and use the handle wirelessly

• If the handle fails to connect with P4 host within 30 seconds in search state, it will enter sleep state. In the connected state, there is no button operation for about 10 minutes, and the 3D rocker does not
  move greatly, and the handle enters the sleep state; Press the HOME button during sleep to wake up the handle-the sleep time without operation can be set on the console。

• If the handle needs to be turned off, please press the PS key for 8-10 seconds, the LED light goes out and the handle is turned off;

LED guiding lights

• After different handles are connected to the host, LED light bars display different colors to distinguish users. When you press the HOME button, t he LED light bar will emit light in a specific color. The assigned color depends on the order in which each user presses the HOME button. The first connecting handle is blue, the second is red, the third is green and the fourth is pink. Up to four handles can be used at the same time.
• The LED light bar will be displayed in breathing light when it is turned off and charged, and the color will be orange. When it is full, the light will go out.

TURBO function settings

After the handle is connected to the host computer, the buttons: , , , ,L1,L2, R1,R2 can be Turbo operated according to the user’s requirements. Turbo and share share share this function key.
Operation mode: press and hold the x key, and then press the SHARE key to perform Turbo operation on the x key (the order of pressing the x and SHARE keys is not required). if you need to cancel the
Turbo function of x, press and hold the SHARE key, and then press the x key to clear the Turbo function of this key. after shutdown, the previously set
Turbo function will not be saved, and the initial state will be automatically restored.

Reset function

When the handle is abnormal, such as key disorder, crash, connection failure, etc., you can try to restart the handle.
Reset mode: insert a slender object into the Reset hole on the back of the handle, and press the reset key to reset the handle state.

Attention

• Do not use this product near the fire source;
• Do not put the product in a damp or dusty environment;
• Do not be exposed to direct sunlight or high temperature;
• Do not use chemicals such as gasoline or thinner;
• Do not hit the product or make it fall off due to strong impact;
• Do not bend or pull the cable components strongly;
• Do not disassemble, repair or refit.

Package

GAMEPAD x1            DATA CABLE x1     USER GUIDE x1

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>