MOTOMASTER 037-9931-4 3-Blade Tripod Work Light Instruction Manual
- June 6, 2024
- MOTOMASTER
Table of Contents
MOTOMASTER 037-9931-4 3-Blade Tripod Work Light Instruction Manual
SAFETY
BEFORE YOU USE THIS DEVICE FOR THE FIRST TIME, PLEASE READ THE FOLLOWING NOTES IN THIS MANUAL AND HEED ALL WARNINGS, EVEN IF YOU ARE FAMILIAR WITH HANDLING ELECTRONIC DEVICES. KEEP THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE.
WARNING!
- Do not use if broken, bent, cracked or damaged parts are present. Any light that appears damaged in any way or operates abnormally must be removed from service immediately. Inspect before each use.
- This light is not to be used by children. Keep out of reach of children.
- Do not leave the light on and unattended.
- Do not dispose of batteries in fire. Batteries may explode or leak.
- Do not charge or use near open flames or glowing embers.
- Do not shine directly into eyes.
- Never block lens and reflector during operation.
- Unplug unit and allow it to cool before attempting any cleaning or maintenance.
CAUTION!
- Do not store the light for an extended period of time. Charge every three months during storage.
- Do not charge the light for an extended period of time. Overcharging may shorten battery life.
- You must give the light battery a top-up charge at the time of purchase.
- Avoid charging at temperatures below 39°F (4°C).
PRODUCT DESCRIPTION
Your new 3-blade tripod work light provides a safe and portable source of light when you need it, especially in emergency situations. It is ideal to use during automotive repair work, roadside emergencies, work around the home, or camping.
| No. | Description |
|---|---|
| 1 | On/off switch (high/medium/low/off) |
| 2 | Charging socket |
| 3 | Charging indicator |
| 4 | Foldable and adjustable tripod |
| 5 | Each blade can be adjusted up |
and down to 90°
6| Each blade can rotate a maximum of 180C
7| 55 bright LEDs for each blade; total
165 LEDs for 3 blades
8| Adjustable head (90° at most)
9| Hanging hook
10| AC adaptor
| Power requirements: | Max 5 V DC 1000 mA |
|---|---|
| Battery type: | 3.7 V 4000 mAh Li-ion |
| Bulb type: | LED |
| Charging time: | around 8 hours |
OPERATION
PACKAGE CONTENTS
3-blade tripod work light
AC adaptor (5V 1A)
RUNNING TIME
The approximate running times for this light when the battery is fully charged
and in maximum performance state are as follows:
Around 2.5 hours for high mode
Around 4 hours for medium mode
Around 8 hours for low mode
In order to ensure maximum battery performance, the light should be fully charged before being used for the first time.
Press the on/off switch (part 1) to turn on or off the work light This work light features three different intensities: high/medium/low. The brightness of high light can reach around 1000 lumen. Select the light operation mode suitable for each application.
NOTE: The AC adaptor can charge the battery, and it can also be used as a power supply while it’s charging the battery, but the brightness will be around 200-1000 lumens, depending on the capacity of the battery.
CHARGING INSTRUCTIONS
Charge the worklight via the supplied adaptor only, as other chargers may cause damage to the unit.
- Plug charging jack into charging socket (part 2) and then connect the other end of adaptor into a mains supply socket (AC power supply).
- The charging LED indicator will glow RED while charging is in progress.
- The battery will be fully charged after approximately 8 hours, and the RED charging indicator will turn GREEN when the unit is fully charged.
- Disconnect jack plug from the light, remove the adaptor from the mains supply socket, and switch off.
MAINTENANCE
THE BATTERY SHOULD BE RECHARGED EVERY THREE MONTHS.
This will help keep a longer-lasting battery life.
Clean the cooled lens with household window cleaner; then wipe with a soft, clean, dry cloth. Clean the plastic housing with a clean, dry cloth. Do not expose the light to direct sunlight. Dry thoroughly before use. Store the light in a dry, clean area. Avoid high humidity.
Only qualified service personnel must perform repairs. Do not open the exterior casing of the light, as there are no user-serviceable parts inside. Opening or tampering with the casing may void any guarantee and/or cause damage to the product or personal injury. LED bulbs will never wear out under normal conditions and do not need to be replaced. Rechargeable battery can not be replaced.
NOTE: For safety reasons, do not change the battery. Seek a professional for assistance if a new battery is needed.
STORAGE
Store the light in a clean and dry area. Store the adaptor supplied with this product safely. This will ensure you always have the charging device when needed. To prevent fire or burning, allow the light to cool down completely before you store it.
ENVIROMENTAL CONNECTIONS
ENERGY PERFORMANCE VERIFIED
RENOEMENT ENERGETIOME VERIFIE
Do not dispose of batteries in household waste. Dispose of them in an
environmentally safe way.
The product and packaging are made from recyclable materials (plastics,
metals, paper). If the product is no longer suitable for use, dispose of it in
an environmentally-friendly manner in accordance with your local ordinances.
WARRANTY
This product carries a one (1) year warranty against defects in workmanship and materials. At its discretion, MotoMaster Canada agrees to have any defective lights replaced free of charge, within the stated warranty period, when returned by the original purchaser with proof of purchase. This product is not guaranteed against wear or breakage due to misuse and/or abuse.
Made in China
Imported by MotoMaster Canada Toronto, Canada M4S 288.