KESSARIS Y16-T Smart Bracelet User Manual
- June 6, 2024
- KESSARIS
Table of Contents
Y16-T Smart Bracelet
User Manual
It is recommended to read this user manual carefully and keep it for future reference
Product Overview
Specification
- Waterproof IP67
- Chipset HS 6620D
- 1.3 inch IPS color display
- Single touch Screen
- 170mAh battery (Stand by 10~15days)
- Compatible with iOS & Android
- Watch Size: 45.5 x 37 x 9.5mm
Main functions
Operation (The bracelet)
Turn on
Press the on the bottom center of the screen and hold for 3 seconds to turn on
the bracelet.
Clockfaces
After turning on the bracelet, touch the circular button to go into the clock
faces. There are a total of 3 clock faces available. You can tap the circular
button on the bottom center of the screen and 8 functions will appear.
Body Temperature monitoring
Bracelet will automatically monitor body temperature and outdoor temperature.
Steps/Calories/Distance/Sleep Status
When you are in the clock face, touch the circular button to show steps,
calories, distance, and sleep status.
Heart Rate / Blood Pressure / Blood Oxygen
Make sure the watch fits snug on your wrist so the case back can take accurate
readings. Press the heart rate, blood pressure, or blood oxygen features. The
bracelet will detect the data automatically and will be available after 40
seconds.
Sports mode
There are 3 sports available; running, cycling and climbing.
Press the icons to start the modes accordingly.
Messages reminder
You can check the messages from your phone,
If there are many messages, hold down for 3 seconds on the home button to
check all messages.
Note: This function only works after connecting to your mobile phone.
Other function
On the “other screen” hold down the circular button for 3 seconds to enter the
interface. The order is Stopwatch, Find Phone, Bluetooth, Turn Off and Return.
Operation (The APP)
Synchronize the bracelet with your mobile device through the application
-
Download ”Wearfit 2.0” from APP Store(iOS) or Google Playstore (Android). Also available from the OR code shown below.
-
Turn on the watch and the BT on your phone.
-
Open “Wearfit2.0” on your device (keep the watch near your phone while paring)
-
Searching BT name, Kessaris, pair the watch with your device by the following steps.
There are three main pages in the app.
Dashboard
On the dashboard, it will show all of your daily fitness data like steps,
calories, distance, sleep, heart rate, blood pressure, and blood oxygen. You
can also check data for a 1 week or month period.
Middle Page
You could use a remote camera and find the device on this page, you also could
use the GPS function in here.
Setting
Personal Data: Set up all your personal information like name, height, weight,
birthday, and gender.
Device Management:
- Go into device manager and you can set up call notifications, messages, and social media.
- You also can set up and raise your hand to brighten the screen.
- You could set up to detect heart rate every hour automatically.
- Here is an anti-lost reminder, when your turn on this function, the watch will vibrate once it’s disconnected.
- Sedentary reminders can be set
- APP reminder and Do not disturb mode can be set
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
1001
Avenue of the Americas, 6th FL,
New York, NY 10018
www.accutimewatch.com
Customer Service
Please email: info@accutimewatch.com
212-686-9220 (9:00AM-5:00PM EST)
Made in China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>