FaceSec FBD01WS Biometric Recognition Device Instruction Manual

**

**

**FaceSec FBD01WS Biometric Recognition Device

Installation instructions
**

Installation method 1

1.  Secure the bracket to the 86 box with 2 screws (M4*40).
2.  Connect the cable on the bracket to the corresponding interface of the device (see port description).
3.  Adapt the device from top to bottom on the bracket.
4.  Use 2 screws (M2*7) to lock the device and bracket from the bottom of the device to complete the installation.

Installation method 2

1.  Select the appropriate mounting location and attach the positioning sticker to the mounting location.
2.  Check the position of hole 5 and the hole 6 on the positioning sticker to open the hole in the wall (recommended aperture 6mm, depth 40mm).
3.  Remove the positioning sticker.
4.  Secure the bracket to the wall with 2 sets of expansion screws (M4*25).
5.  Connect the cable on the bracket to the corresponding interface of the device (see port description).
6.  Adapt the device from top to bottom on the bracket.
7.  Use 2 screws (M2*7) to lock the device and bracket from the bottom of the device to complete the installation.

Precautions

1.  Hole 1 to 4 on the bracket (see positioning sticker), do not remove the waterproof pad at the corresponding position when not in use.
2.  Support hole 3 and hole 4 (see positioning sticker) for matching 86 box repairer.
3.  If using a 86-box repairer, replace the screws that come with the 86-box repairer with the screws in the accessory.

**Port description

**

Dimensional drawing (unit: mm)

Recognizable position

Note: The recognizable height Lis is proportional to the camera to ground distance H.

Specification

• WIFI 2.4G 8/G/N
• WIFI 5G -5. 8G band 1 /2/3/4

Remark: This product can be used across EU member states We declare that this device is in compliance with the essential requeirements and other relevant provisions of Directive 2014/53/EU.Our product do not contains the AC/DC adaptor.You need to purchase the DC 12V /2A compliance the directive 2014/30/EU. The adapter shall be installed near the equipment and shall be easily accessible. Operation steps of device viewing authentication information:

1. Enter the “Setting” interface and click “About”
2. Enter the “About” interface and click “Credentials”

FCC Warning

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator& your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>