Qr Tech H88FCC202012 Smart Watch User Manual
- June 6, 2024
- Qr Tech
Table of Contents
Qr Tech H88FCC202012 Smart Watch
Please read the manual of the smartwatch carefully before use, so as to install and use it in a correct and easy manner. Due to software upgrades, some functions may be adjusted, please refer to the real products.
- Check whether the model is correct and the accessories are complete.
- This smartwatch requires a SIM card to upload information through 4G/3G/2G network, it is a NANO card that which the same as the Iphone11. If any questions please contact the supplier.
- Band FDD:B1/B3/B7/B8/B20 TDD:B38/B39/B40/B41WCDMA:B1/B8 GSM:B3/B8
- Choose “Trust” in IOS system by the steps: Setting-general-profile.
Packaging
- A smartwatch,
- A USB cable,
- A Manual,
Specifications
- Product Name: 4G Smartwatch
- Screen size: 1. 4 “resolution: 240 * 240
- Touch panel: Capacitive touch panel
- Charging input: DC 5V 1A
- Working temperature: -100C-550C
- Network: 4G/3G/2G network
- Bluetooth: BT4.1+EDR
- SIM Card: NANO card
- Battery Capacity: 600MHA
- Standby time: 24-48 hours
- call duration: About 2 hours
Functions description
- Power Key
- Power off state
- Power-on state
- Press 3s to power on(Changing auto Power on)
- Press 5s to SOS
- Press to hang up
Install SIM card
open the cover, and put the SIM card in it. Close in the smartwatch.
Charging
Use the USB cable charging for the device.
matters need attention
Please ensure that the SIM card has a sufficient balance to avoid any
inconvenience. The internal entry of the SIM card slot or product may cause a
malfunction or malfunction. This product is not able to work outside the power
and service area, even for registered users. When keeping and using, please
avoid the environment with too low temperature or too high, moisture, dust and
dust, which can lead to failure. Do not disassemble, repair or modify the
product privately. There is no user maintainable part of this machine. Please
contact the local agent or after-sales service center. This product may not
match with the power charger supplied by the non-product, and the manufacturer
will not be responsible for any product non-product, and the manufacturer will
not be responsible for any product Please use this product in the legal field.
Any violation of the law will be borne by the user.
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This Smart Phone meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluations of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. The SAR limit of USA (FCC) is 1.6 W/kg averaging over one gram of tissue for the front of the face and 4.0 W/kg averaging over 10 gram of tissue for the wrist. Device types: H88 (FCC ID:2AYH5-H88FCC202012) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for Front of the face is
0.370W/kg(separation distance is 10mm) and when properly worn on the Wrist is 0.204W/kg(separation distance is 0mm). The use of belt clips, holsters and similar accessories should not contain metallic components 25 in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements and should be avoided.