ware cares 16406 Cat Furniture Instructions
- June 16, 2024
- ware cares
Table of Contents
Ware cares 16406 Cat Furniture
Specifications
- Brand: Ware Pet Products
- Model: Kitty-Quick TM
- Color: Beige
- Assembled Dimensions: 24 x 20 x 40 (H)
- Item Number: 16406
Parts Included
- 1 – Allen Wrench (#6426)
- 1 – Base Unit
- 1 – Round Bed
- 1 – Hex Bolt (#6422)
- 1 – 14 Post
- 1 – Double Threaded Bolt (#6424)
Warnings and Cautions
Please follow all instructions and warnings to avoid injury to pets or
property damage.
- This cat furniture is for cat use only; please keep children away.
- To avoid choking hazards keep small parts away from pets/children.
- Do not step, shake, rock, climb on, or hang onto the cat furniture.
- Cat furniture belongs indoors, away from wet areas and direct sunlight.
- Place your cat furniture on a flat, level surface. Preferably against a wallor in a corner for stability.
- If your cat furniture becomes torn or damaged, please discard.
- The product pictured here may vary slightly from your cat furniture, as this product is continually being improved.
Step 1
Using the Threaded Bolt, attach the 14 Post to the prebuilt base unit. (see
Figure 1 )
Step 2
Using the Hex bolt, attach the Round Bed to the 14 Post. (see Figure 2 )
Care Tips
Vacuum fur when necessary and spot clean stains using lukewarm water. Over
time, the carpet on your cat furniture may begin to show signs of wear.
Periodically examine your cat furniture for areas of repetitive use, which can
result in fraying of the carpet and/or the jute rope. Use scissors to trim off
the damaged areas.
Assembly Tips
- Avoid over-tightening the hex bolts as this can cause the bolt threads to become stripped and result in less secure part connections.
- Assemble your cat furniture on a flat, level surface.
- In case of frayed fibers on the carpets exposed edges, trim with a pair of scissors to remove.
- Vacuum your cat tree prior to initial use to remove any packaging debris.
Using the Threaded Bolt, attach the 14” Post to the prebuilt base unit. (see figure 1)
Using the Hex bolt, attach the Round Bed to the 14” Post. (see figure 2)
Ware Mfg., Inc. claims copyright protection under U.S. and International Copyright Law in the attached sculptural work and in the content of this packaging. Copyright 2023 Ware Mfg., Inc. All rights reserved. If you have any questions or concerns about this product contact our customer service department at 1-800-295-2243 Mon-Fri 8:00 – 4:00 MST or email us at hello@warepet.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>