Hajen RT1505NN Sprint AI Speaker User Guide

June 6, 2024
Hajen

Hajen RT1505NN Sprint AI Speaker

 Getting to Know Your Device

FIXTA is Alexa Voice Service enabled LTE mobile hotspot. You can enjoy Alexa voice service with all Alexa skills wherever you have LTE or WiFi signal. Learn more about the device setting like connecting to your car or to your network as a multi-room speaker, fixta hotspot connection and so on. www.hajen.eo.kr/fixta.pdf

Hajen-RT1505NN-Sprint-AI-Speaker-fig1 Hajen-
RT1505NN-Sprint-AI-Speaker-fig2 Hajen-
RT1505NN-Sprint-AI-Speaker-fig3

Setting Up Your Device

Install FIXTA app.

Download FIXTA app. on your mobile device. Charging

Charge the device before using. 7) (DC SV, 2A , USB-C Type Jack) 8)

Insert SIM Card

Make sure your SIM card direction. Use a Nano-SIM. (Mini or Micro SIM cannot be used.)

Setup

Open the FIXTA app. on your phone and follow the instruction to complete the device set up and Alexa log in.

  1.  Tum on the FIXTA device and press the action button for 4 seconds
  2.  Select your device FIXTA-XXXX & press Next
  3.  Device connected to your phone
  4.  Create a new account if you don’t have an Amazon account.
  5. Log in to your Amazon account.
  6. Select the language for Alexa.
  7. Download Amazon Alexa app. for additional settings.
  8.  Your settings are complete.

Changing Network Mode

You can press the LTE button or change the network setting on the app to change from LTE to WiFi mode or vice versa.

Hajen-RT1505NN-Sprint-AI-Speaker-fig8

Using Amazon Alexa

  1.  Connect FIXTA Device to the Internet
    • Used a valid SIM card to use LTE mode.
    • Connect to your wireless router to use WiFi Mode.
  2. Log in to your Amazon account on the FIXTA app.
  3.  Say ‘Hello’ to your FIXTA
  4.  Alexa Status Indicator LED
Group Status Co�,
Idle Idle •• Cyan &Blue
Co,e Listening / Thinking / Speaking •    Red
MicrophoneOff MicrophoneOff •• Cyan &Blue
Alerts Timers I Alarms f Reminders
Notifications Notification Arrives / Queued

Yellow

Purple

Do Not Disturb| Do Not Disturb Enabled| •    “‘””
Pairing &Discovery| Bluetooth|

Em,,s

| System and Device Errors| •    Red
AlexaService Unavailable
No Internet Connection

Using LTE Hotspot

Go to the Settings page Press the Network menu

Select LTE and activate hotspot

Select hotspot Wifi band(Optional)

  • 5GHz Band is recommended for optimal performance.
  • You cannot search For connecting to your hotspot if your device doesn’t support 5GHz.

Using Bluetooth & Spotify

  1. Go to the Bluetooth menu
  2. Select the available speaker device

Hajen-RT1505NN-Sprint-AI-Speaker-fig14

Spotify Connect

Use your phone, tablet or computer as a remote control for Spotify. Go to Spotify.com/connect to learn how. The Spotify Software is subject to third party’s licenses found here: www.spotify.com/connect/third-party- licenses.

Important Safe Instruction

As with general electronic product, precautions should be observed during handling and use.

  • Read this instruction carefully and keep it.• Do not use the product near water.
  •  Clean only with dry cloth.
  • Do not install near any heat sources such as stoves.
  • Protect the USB cable from pressing by heavy substances or pulled by excessive power.
  • Unplug the Product during lightning storms or when unused for long periods of time.
  • Keep away magnetic recording devices from the Product as there may be a small amount of magnetic flux leakage.
  • Only use under 122°F(S0″C) of the environment to prevent any damage to the built-in battery,
  •  Do not dispose of in household waste, as the product contains a built-in battery and should be treated and disposed of according to regulations on waste disposal.
  •  A sudden movement from cold to hot environment may cause moisture condensing on the Product and degrade system performance and decrease product life span.
  •  Protect product from direct sunlight
  •  Do not use solvents to clean the Product and keep away from a dusty environment.
  •  Do not attempt to disassemble the Product.
  •  AC adaptor is not supplied with the Product. Damages caused by improper power adaptors is not compensated.
  •  Always leave sufficient space around the product for ventilation. Do not place Product in or on a bed, in a bag that may prevent air flow through vent openings.
  • Don’t place lighted candles, cigarettes, etc. on the Product.
  •  Be care that heavy objects do not fall into the Product.
  • To completely disconnect the power input, the USB cable should be disconnected from the Product.
  • Use of the Product in moderate climates. Use under extreme temperature may degrade system performance and product life span.

Certification and Warnings

The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types HAJEN Al Speaker(FCC ID: 2ACFTRT1505NN) has also been tested against this SAR limit The highest SAR value reported under this standard during product certification for use when properly worn on the body is 0.719 W/kg. Simultaneous RF exposure is 1.435 W/Kg. This device was tested for typical body-worn operations with the back of the handset kept 10mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 10mm separation distance between the user’s body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements and should be avoided.

FCC statements: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

  1.  this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE:

  • The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment Such modifications or change could void the user’s authority to operate the equipment.
  •  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by being the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  •  Reorient or relocate the receiving antenna.

  •  Increase the separation between the equipment and receiver.

  •  Connect the equipment into an outlet on a circuit different from that to which the receiver
    is connected.

  •  Consult the dealer or an experienced radio/TV technician for help.

WARNING:

This product contains magnets that can be harmful to pacemaker wearers.  This equipment may generate or use radiofrequency energy. Changes or modification to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

FCC ID: 2ACFTRT1505NN
Certified Company : HAJEN Co., Ltd.
Manufacturer/Counby : HA.JEN Co., Ltd./ China
Input Rating: 5V-2A
Charging temperature range: 23″F -140″F(-5″C-60″C)
Discharging temperature range : 14″F -140″F(-10″C -60-C)

App Store is a service mark of Apple Inc.
Google Play is a trademark of Google Inc.
Bluetooth Wordmark and logos are registered trademarks owned by Bluetooth SIG, Inc.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals