Wenzhou Boshi Electric Technology PL-M1L Mini Smart Padlock Instruction Manual
- June 6, 2024
- Wenzhou Boshi Electric Technology
Table of Contents
- Wenzhou Boshi Electric Technology PL-M1L Mini Smart Padlock
- PRODUCT GRAPHIC
- APP DOWNLOAD
- INITIAL PASSWORD AND RESET
- KEYBOARD UNLOCK AND INDICATOR
- APP MAIN INTERFACE
- APP BINDING DEVICE
- DEVICE MANAGEMENT AND UNLOCKING METHOD
- PASSWORD MODIFICATION
- APP KEV SHARING
- SPECIFICATION PARAMETER
- Product features
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Wenzhou Boshi Electric Technology PL-M1L Mini Smart Padlock
Thank you for the purchase of this product. For your convenience, please read this instruction carefully and keep it properly.
PRODUCT GRAPHIC
APP DOWNLOAD
- Software Download
- I.users scan the two-dimension code below according to system to download APP to install.
- The lowest version requires: Android 4.0, l0S7.0, Bluetooth 4.0.
INITIAL PASSWORD AND RESET
- Initial keyboard settings
1. Press the wake button on your device.
2. Enter the keyboard initial password In order to unlock.- Restore factory settings
1. Open the padlock and pull out the lock beam so that the padloc is unlocked.
2. Press and hold the awake button until the indicator light goes out the recovery is successful, and the password is changed to the • APP interface initial password.
3. lf the APP is already bound to this device, the APP needs to re-bind the device to use it after restoring the factory settings.- Precautions
1. After unlocking the correct password, if the lock beam is not removed, the device will automatically lock after 5 seconds.
2. lfthe keyboard password is entered incorrectly 5 times, the device will have a lock time of 3 minutes, and the password cannot be entered again within 3 minutes.
3. When the user is using the device, please change the initial password and set the new password at the first time.,KEYBOARD UNLOCK AND INDICATOR
- Keyboard unlock
1. Press the wake button on your device.
2. Enter the initial password or the modified keyboard password in order to unlock it. (After completing the input,the indicator liglit shows green that means unlock successfully, the indicator light shows red that means password is wrong)- Indicator light status
APP MAIN INTERFACE
- APP interface
- Main interface introduction
1. After opening the a pp for the first time, first enter the ‘Login’ interface to set the gesture password.,
2. After setting the gesture password, there are three interfaces on the operation page;They are ‘My Bluetooth Lock’, ‘Record Query·, ‘User Center·.
3. The User Center interface can turn off gesture passwords,where ‘security issues’It is a way to provide a way to use the ‘login interface” when forgetting the gesture password.APP BINDING DEVICE
- Initially bind the Bluetooth padlock
1. Open the app and go to the ‘My Bluetooth Lock” interface.
2. Press the wake button on the Bluetooth padlock.
3. Click the “Add Bluetooth Lock’ field, click “Refresh’ to search for the device and click · Add” to complete the Bluetooth lock device addition .•DEVICE MANAGEMENT AND UNLOCKING METHOD
- APP connected device unlocked
1. When the addition is complete, the device appears in the My Bluetooth Locks screen.
2. Press the wake button on the Bluetooth padlock.
3. Click , connect the Bluetooth padlock , and then click “Unlock” to complete the unlock . If the ios system needs to enter the initial password when “unlocking’.-
The initial password of the APP connected device
Digital initial password: “123412”
Note: After binding, click “Manage” to modify the initial password. (The initial password must be modified to prevent strangers from binding padlocks) -
Click “Manage” to enter the “Device Management” settings interface
1. The device name, password, unlock mode, share and delete can be set in the interface.- APP automatically unlock
1. Press the wake button on your device.
2. Click tfO and connect the Bluetooth padlock .
3. Click ·Management·, then click · Automatic unlock settings” to open, complete automatic unlock settings.
4. It will be in the Bluetootn range when unlock again,press the wake-up button of the Bluetooth padlock to unlock lt.(Must be on the conditions that the mobile Bluetooth is open and APP is running in the background) PASSWORD MODIFICATION
- change Password
1. Mobile APP connects to the device.
2. Click “Manage” to enter the device management end click “Change Password’ to modify (This password is the Bluetooth padlock binding password) - Modify the key password
- Mobile APP connects to the device.
- Click “Manage” to enter the device management point “Modify button password” to modify. (Can only be modified with the bound phone)
APP KEV SHARING
- Sharing key
- Mobile APP connects to the device.
- CI ick • Manage’ to enter the device management. Click ‘Share Key” to enter the QR code. Use the phone to add ‘Scan Code Binding” to share the device key to the other party. (The password is a Bluetooth unlock key).
SPECIFICATION PARAMETER
Product features
- Small lock body.
- Key password unlocking.
- Bluetooth connection app unlocking and setting .
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>