LG 43NANO75SQA 43-Inch 4K Smart NanoCell TV Owner’s Manual
- June 6, 2024
- LG
Table of Contents
LG 43NANO75SQA 43-Inch 4K Smart NanoCell TV Owner’s Manual
Important Safety Instruction
-
Read these instructions.
-
Keep these instructions.
-
Heed all warnings.
-
Follow all instructions.
-
Do not use this apparatus near water.
-
Clean only with dry cloth.
-
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
-
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
-
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
-
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
-
Only use attachments/accessories specified by the manufacturer.
-
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
-
Unplug this apparatus during lightning storms or when unused for long periods of time.
-
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Before reading this manual
- Read this manual thoroughly before operating your TV, and keep it for future reference.
- On the website you can download the manual including installation, using, troubleshooting, specifications, license etc and view its contents on your PC or mobile device.
- User Guide : For more information about this TV, read the USER GUIDE embedded in the product. (Depending upon model)
- To open the USER GUIDE → → [Support] → [User Guide]
Optional Extras
-
Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items. These devices work only with certain models.
-
The model name or design may be changed due to the manufacturer’s circumstances or policies.
-
Magic Remote Control :
Check whether your TV model supports Bluetooth in the Wireless Module Specification to verify whether it can be used with the Magic Remote. -
A cable to connect antennas and external devices must be purchased separately.
Note
- Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.
- The items supplied with your product may vary depending upon the model.
- Image shown may differ from your TV.
Warning! Safety instructions
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL
**** The symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
**** The symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the device.
WARNING: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
-
TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER ITEMS WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.
-
Do not place the TV and/or remote control in the following environments:
- Keep the product away from direct sunlight.
- An area with high humidity such as a bathroom.
- Near any heat source such as stoves and other devices that produce heat.
- Near kitchen counters or humidifiers where they can easily be exposed to steam or oil.
- An area exposed to rain or wind.
- Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g., on shelves above the unit).
- Near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.
- Do not install in excessively dusty places. Otherwise, this may result in fire, electric shock, combustion/explosion, malfunction or product deformation.
-
Ventilation
- Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase.
- Do not install the product on a carpet or cushion.
- Do not block or cover the product with cloth or other materials while
unit is plugged in.
-
Take care not to touch the ventilation openings. When watching the TV for a long period, the ventilation openings may become hot.
-
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the device.
-
Do not move the TV whilst the Power cord is plugged in.
-
Do not use a damaged or loosely fitting power cord.
-
Be sure to grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.
-
Do not connect too many devices to the same AC power outlet as this could result in fire or electric shock.
-
Disconnecting the Device from the Main Power
- The power plug is the disconnecting device. In case of an emergency, the power plug must remain readily accessible.
-
Do not let your children climb or cling onto the TV. Otherwise, the TV may fall over, which may cause serious injury.
-
Outdoor Antenna Grounding (Can differ by country):
- If an outdoor antenna is installed, follow the precautions below.
An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur.
Be sure the antenna system is grounded to provide some protection against voltage surges and built-up static charges.
Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode.
Antenna grounding according to the National Electrical Code, ANSI/
NFPA 70
- If an outdoor antenna is installed, follow the precautions below.
-
Never touch this apparatus or antenna during a lightning storm. You may be electrocuted.
-
Make sure the power cord is connected securely to the TV and wall socket if not secured damage to the Plug and socket may occur and in extreme cases a fire may break out.
-
Do not insert metallic or inflammable objects into the product. If a foreign object is dropped into the product, unplug the power cord and contact the customer service.
-
Do not touch the end of the power cord while it is plugged in. You may be electrocuted.
-
If any of the following occur, unplug the product immediately and contact your local customer service.
- The product has been damaged.
- If water or another substance enters the product (like an AC adapter, power cord, or TV).
- If you smell smoke or other odors coming from the TV
- When lightning storms or when unused for long periods of time. Even the TV is turned off by remote control or button, AC power source is connected to the unit if not unplugged in.
-
Do not use high voltage electrical equipment near the TV (e.g., a bug zapper). This may result in product malfunction.
-
Do not attempt to modify this product in any way without written authorization from LG Electronics. Accidental fire or electric shock can occur. Contact your local customer service for service or repair. Unauthorized modification could void the user’s authority to operate this product.
-
Use only an authorized attachments / accessories approved by LG Electronics. Otherwise, this may result in fire, electric shock, malfunction, or product damage.
-
Never disassemble the AC adapter or power cord. This may result in fire or electric shock.
-
Handle the adapter carefully to avoid dropping or striking it. An impact could damage the adapter.
-
To reduce the risk of fire or electrical shock, do not touch the TV with wet hands. If the power cord prongs are wet or covered with dust, dry the power plug completely or wipe dust off.
-
Batteries
-
Store the accessories (battery, etc.) in a safe location out of the reach of children.
-
Do not short circuit, disassemble, or allow the batteries to overheat.
Do not dispose of batteries in a fire. Batteries should not be exposed to excessive heat. -
Caution: Risk of fire or explosion if the battery is replaced by an incorrect type.
-
-
Moving
- When moving, make sure the product is turned off, unplugged, and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV.
Otherwise, this may result in product damage, fire hazard or injury.
- When moving, make sure the product is turned off, unplugged, and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV.
-
Keep the packing anti-moisture material or vinyl packing out of the reach of children.
-
Do not allow an impact shock, any objects to fall into the product, and do not drop anything onto the screen.
-
Do not press strongly upon the panel with a hand or a sharp object such as a nail, pencil, or pen, or make a scratch on it. It may cause damage to screen.
-
Cleaning
- When cleaning, unplug the power cord and wipe gently with a soft/ dry cloth. Do not spray water or other liquids directly on the TV. Do not clean your TV with chemicals including glass cleaner, any type of air freshener, insecticide, lubricants, wax (car, industrial), abrasive, thinner, benzene, alcohol etc., which can damage the product and/ or its panel. Otherwise, this may result in electric shock or product damage.
Installation
Lifting and moving the TV
When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.
- It is recommended to move the TV in the box or packing material that the TV originally came in.
- Before moving or lifting the TV, disconnect the power cord and all cables.
- When holding the TV, the screen should face away from you to avoid damage.
- Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grille area.
- Use at least two people to move a large TV.
- When transporting the TV, do not expose the TV to jolts or excessive vibration.
- When transporting the TV, keep the TV upright; never turn the TV on its side or tilt towards the left or right.
- When handling the TV, be careful not to damage the protruding buttons.
- **** Avoid touching the screen at all times, as this may result in damage to the screen.
- Do not place the product on the floor with its front facing down without padding. Failure to do so may result in damage to the screen.
- When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.
Mounting on the Table
- Lift and tilt the TV into its upright position on a table.
- Leave a minimum of 10 cm space from the wall for proper ventilation.
- Connect the power cord to a wall outlet.
- **** Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing so may damage the product.)
- If you install the TV on a stand, you need to take actions to prevent the product from overturning. Otherwise, the product may fall over, which may cause injury.
- Do not use any unapproved items to ensure the safety and lifespan of the product.
- Any damages or injuries by using unapproved items are not covered by the warranty.
- Make sure that the screws are fastened tightly. (If they are not fastened securely enough, the TV may tilt forward after being installed.)
- Do not fasten the screws with excessive force otherwise they may strip and become loose.
Securing TV to the Wall
- Insert and tighten the eye-bolts or TV brackets and bolts on the back o the TV.
- If there are bolts inserted at the eye-bolts position, remove the bolts first.
- Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV.
- Connect the eye-bolts and wall brackets tightly with a sturdy rope or cable. Make sure to keep the rope parallel to the flat surface.
- Use a platform or cabinet that is strong and large enough to support the TV securely.
- Brackets, bolts, and ropes are optional. You can obtain additional accessories from your local dealer.
Mounting to the Wall
An optional wall mount can be used with your LG Television. Consult with your local dealer for a wall mount that supports the VESA standard used by your TV model. Carefully attach the wall mount bracket at the rear of the TV. Install the wall mount bracket on a solid wall perpendicular to the floor. If you are attaching the TV to other building materials, please contact qualified personnel to install the wall mount. Detailed instructions will be included with the wall mount. We recommend that you use an LG brand wall mount. The LG wall mount is easy to adjust or to connect the cables. When you do not use LG’s wall mount bracket, use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices. If you are using a non-adjustable mount, attach the mount to the wall. Attach the cables to the TV first, then attach the TV to the mount.
- **** Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.
- For more information of screws and wall mount bracket, refer to the Separate Purchase.
- If you intend to mount the product to a wall, attach VESA standard mounting interface (optional parts) to the back of the product. When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop.
- When mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV.
- Do not install this product on a wall if it could be exposed to oil or oil mist. This may damage the product and cause it to fall.
- When installing the wall mounting bracket, it is recommended to cover the stand hole using tape, in order to prevent the influx of dust and insects, (Depending upon model).
Antenna/Cable
Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations may differ from the actual items and an RF cable is optional.
- Make sure not to bend the copper wire of the RF cable.
- Complete all connections between devices, and then connect the power cord to the power outlet to prevent damage to your TV.
- To improve the picture quality in a poor signal area, purchase a signal amplifier.
- Use a signal splitter to use 2 TVs or more.
- If the antenna is not installed properly, contact your dealer for assistance.
- This TV cannot receive Ultra HD (3840 x 2160 pixels) broadcasts directly because the related standards have not been confirmed (Depending upon country).
Starting TV
Turning on the TV
You can simply operate the TV functions, using the button.
Power On (Press)
Power Off1) (Press and Hold)
Menu Control (Press2))
Menu Selection (Press and Hold3))
- All running apps will close, and any recording in progress will stop. (Depending upon country)
- You can access and adjust the menu by pressing the button when TV is on.
- You can use the function when you access menu control.
Note
- When the TV is turned on for the first time after being shipped from the factory, initialization of the TV may take approximately one minute.
- Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
- The device must be easily accessed to a location outlet near the access. Some devices are not made by turning on / off button, turning off the device and unplugging the power cord.
Connections
You can connect various external devices to the TV. For more information on external device’s connection, refer to the manual provided with each device.
HDMI
- When connecting the HDMI cable, the product and external devices should be turned off and unplugged.
- Supported HDMI Audio format (Depending upon model):
True HD (48 kHz),
Dolby Digital / Dolby Digital Plus (32 kHz / 44.1 kHz / 48 kHz), PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz)
Note
- If the device connected to Input Port also supports HDMI Deep Color, your picture may be clearer. However, if the device doesn’t support it, it may not work properly. In that case, change the TV’s [HDMI Deep Color] setting to off.
- → → [General] → [Devices] → [HDMI Settings] → [HDMIDeep Color]
- Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not display or a connection error may occur.
- Recommended HDMI cable types (3 m or less)
- Ultra High Speed HDMI®/™ cable
USB
Some USB Hubs may not work. If a USB device connected through a USB Hub is not detected, connect it directly to the USB port on the TV. (Depending upon model)
Note
- For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick, 18 mm width and 8 mm a wire diameter. (Depending upon model)
- Use an extension cable that supports USB 2.0 if the USB cable or USB flash drive does not fit into your TV’s USB port.
IR Blaster
Control the set-top box (cable/satellite/IP/OTT), Blu-ray/DVD player, soundbar, game consoles, etc., using the IR Blaster. (Depending upon country) (Depending upon model)
Note
- Connect the IR Blaster cable to the TV’s IR Blaster port.
- Use universal control settings to control the device.
- Secure the IR Blaster with the 3M tape provided.
External Devices
Supported external devices are: Blu-ray player, HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices.
Note
- The external device connections shown may differ slightly from illustrations in a manual
- In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the [Picture] menu until the picture is clear. Depending upon the graphics card, some resolution settings may not allow the image to be positioned on the screen properly.
- When connecting to a wired LAN, use a CAT 7 cable with high speed Internet transmission.
Specifications
Product specifications may be changed without prior notice due to upgrade of product functions.
(Depending upon country)
Broadcasting Specifications
Television system
| Digital| Analog| Digital| |
Analog
|
Digital
| Analog
---|---|---|---|---|---|---|---
SBTVD
|
NTSC-M/PAL-N/ PAL-M
|
DVB-T/T2
|
NTSC-M/PAL-N/ PAL-M
|
ATSC, 64 & 256 QAM
|
NTSC-M
Channel coverage (Band)
|
VHF 2-13
UHF 14-69
DTV 2-69
CATV 1-135
|
VHF 2-13
UHF 14-69
DTV 2-69
CATV 1-125
UHF 14-69,
DTV 2-69,
CATV 1-135,
CADTV 1-135
|
VHF 2-13,
External antenna impedance|
75 Ω
- Certain 8K input/decoding standards may not be supported. An additional device may be necessary to support certain 8K standards. Upscaled and enhanced 8K images will vary depending upon the source content (Depending upon model).
Environment Condition
Operating Temperature
| 0 °C to 40 °C
---|---
Operating Humidity
|
Less than 80 %
Storage Temperature
|
-20 °C to 60 °C
Storage Humidity|
Less than 85 %
- The energy information provided on the product is shown in accordance with the applicable regulations of each respective country, (Depending upon the country).
- The Energy consumption was measured in accordance with IEC 62087.
- The actual energy consumption depends on the usage environment, (Example: content watched, TV settings, etc.).
- For information of the power supply and power consumption, refer to the label attached to the product.
- The typical power consumption is measured in accordance with IEC 62087 or each country’s energy regulations.
- On some models, the label is inside the external device connection terminal cover.
- Depending upon the model or country, the typical power consumption may not be on label.
Product Information
(Only QNED99*)
Wireless module(LGSBWAX12)Specifications
Wireless LAN (IEEE 802.11a/b/g/n/ac/ax
Frequency range | Output Power (Max.) |
---|---|
2,400 to 2,483.5 MHz | 17 dBm |
5,150 to 5,725 MHz | 15 dBm |
5,725 to 5,850 MHz | 15 dBm |
Bluetooth
Frequency range | Output Power (Max.) |
---|---|
2,400 to 2,483.5 MHz | 9 dBm |
As band channels can vary per country, the user cannot change or adjust the
operating frequency. This product is configured for the regional frequency
table.
For consideration of the user, this device should be installed and operated
with a minimum distance of 20 cm between the device and the body. FCC ID:
BEJLGSBWAX12 / IC: 2703H-LGSBWAX12
(Only QNED80, QNED85, QNED90, 86NANO75, 86UQ90*)
Wireless module(LGSBWAC95)Specifications
Wireless LAN (IEEE 802.11a/b/g/n/ac)
Frequency range | Output Power (Max.) |
---|---|
2,400 to 2,483.5 MHz | 18.5 dBm |
5,150 to 5,725 MHz | 18 dBm |
5,725 to 5,850 MHz | 18 dBm |
Bluetooth
Frequency range | Output Power (Max.) |
---|---|
2,400 to 2,483.5 MHz | 9 dBm |
As band channels can vary per country, the user cannot change or adjust the
operating frequency. This product is configured for the regional frequency
table.
For consideration of the user, this device should be installed and operated
with a minimum distance of 20 cm between the device and the body. FCC ID:
BEJLGSBWAC95 / IC: 2703H-LGSBWAC95.
(Except for QNED80, QNED85, QNED90, QNED99, 86NANO75, 86UQ90)
Wireless module(LGSBWAC03)Specifications
Wireless LAN (IEEE 802.11a/b/g/n/ac)
Frequency range | Output Power (Max.) |
---|---|
2,400 to 2,483.5 MHz | 20 dBm |
5,150 to 5,725 MHz | 18.5 dBm |
5,725 to 5,850 MHz | 18 dBm |
Bluetooth
Frequency range | Output Power (Max.) |
---|---|
2,400 to 2,483.5 MHz | 9 dBm |
As band channels can vary per country, the user cannot change or adjust the
operating frequency. This product is configured for the regional frequency
table.
For consideration of the user, this device should be installed and operated
with a minimum distance of 20 cm between the device and the body. FCC ID:
BEJLGSBWAC03 / IC: 2703H-LGSBWAC03
Open Source Software Notice Information
To obtain the source code that is contained in this product, under GPL, LGPL,
MPL, and other open source licenses that have the obligation to disclose
source code, and to access all referred license terms, copyright notices and
other relevant documents please visit https://opensource.lge.com.
LG Electronics will also provide open source code to you on CD ROM for a
charge covering the cost of performing such distribution (such as the cost of
media, shipping, and handling) upon email request to opensource@lge.com. This
offer is valid to anyone in receipt of this information for a period of three
years after our last shipment of this product.
Licenses
Troubleshooting
Cannot control the TV with the remote control.
|
- Check if anything such as tape has been placed over the receiver.
- Check if there is any obstacle between the product and the remote control.
- Replace the batteries with new fresh ones.
---|---
No image display and no sound is produced.
|
- Check if the product is turned on.
- Check if the power cord is connected to a wall outlet.
- Check if there is a problem in the wall outlet by connecting other products.
The TV turns off suddenly.
|
- Check the power control settings. The power supply may be interrupted.
- Check if the auto-off function is activated in the settings menu.
- If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity.
Abnormal Display
|
- If the TV feels cold to the touch, there may be a small flicker when it is turned on. This is normal; there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the TV’s performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.
- This panel is an advanced product that contains millions of pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV. Those dots are deactivated pixels and do not affect the performance and reliability of the TV.
- Displaying a still image for a prolonged period of time may cause an image sticking. Avoid displaying a fixed image on the TV screen for a extended length of time.
Generated Sound
|
-
Cracking noise A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required.
-
Electrical circuit humming/panel buzzing A low level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depending upon the product. This generated sound does not affect the performance and reliability of the product.
-
**** When cleaning the product, be careful not to allow any liquid or foreign objects to enter the gap between the upper, left or right side of the panel and the
guide panel, (Depending upon model). -
Make sure to wring any excess water or cleaner from the cloth.
-
Do not spray water or cleaner directly onto the TV screen.
-
Make sure to spray just enough of water or cleaner onto a dry cloth to wipe the screen.
Regulatory
WARNING! (STABILITY HAZARD)
A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:
- ALWAYS use cabinets or stands or mounting methods recommended by the manufacturer of the television set.
- ALWAYS use furniture that can safely support the television set.
- ALWAYS ensure the television set is not overhanging the edge of the supporting furniture.
- ALWAYS educate children about the dangers of climbing on furniture to reach the television set or its controls.
- ALWAYS route cords and cables connected to your television so they cannot be tripped over, pulled or grabbed.
- NEVER place a television set in an unstable location.
- NEVER place the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support.
- NEVER place the television set on cloth or other materials that may be located between the television set and supporting furniture.
- NEVER place items that might tempt children to climb, such as toys and remote controls, on the top of the television or furniture on which the television is placed.
If the existing television set is going to be retained and relocated, the same considerations as above should be applied.
Symbols
**** | Refers to alternating current (AC). | **** | Refers to stand-by. |
---|---|---|---|
**** | Refers to direct current (DC). | **** | Refers to “ON” (power). |
**** | Refers to class II equipment. |
| Refers to dangerous voltage.
(Image shown may differ from your TV.)
Model| 0| 0| GO| 0| CO| Q| 0-0|
Power consumption
---|---|---|---|---|---|---|---|---
55QNED8OSQA| 1233| 781| 257| 716| 44.2| 16.7| 16.3| 165W
55QNED85SQA| 1233| 779| 257| 716| 45.5| 19.9| 19.5| 195W
65QNED80SQA| 1452| 906| 295| 839| 44.3| 24.9| 24.5| 200W
65QNED85SQA| 1452| 904| 295| 839| 44.9| 30.6| 30.2| 250W
65QNED9OSQA| 1444| 898| 295| 834| 29.5| 26.8| 26.4| 290W
75QNED80SQA| 1675| 1029| 359| 964| 44.5| 36.9| 35.9| 240W
75QNED85SQA| 1673| 1027| 359| 963| 44.9| 40.1| 39.1| 315W
75QNED9OSQA| 1665| 1022| 359| 958| 29.5| 37.0| 36.0| 340W
75QNED99SQA| 1665| 1022| 359| 958| 29.5| 39.0| 38.0| 440W
86QNED8OSQA| 1925| 1165| 359| 1105| 46.1| 55.5| 54.5| 370W
86QNED85SQA| 1925| 1165| 359| 1105| 46.1| 57.5| 56.5| 415W
86QNED9OSQA| 1917| 1162| 359| 1098| 29.9| 52.5| 51.5| 485W
86QNED99SQA| 1917| 1162| 359| 1098| 29.9| 55.9| 54.9| 660W
43NAN075SQA| 967| 622| 216| 564| 57.7| 9.3| 9.2| 110W
50NAN075SQA| 1121| 708| 232| 651| 57.7| 12.4| 12.2| 130W
50NAN 080SQA| 1120| 718| 257| 653| 49.2| 14.4| 14.0| 135W
55NAN075SQA| 1235| 774| 232| 715| 58.1| 14.8| 14.6| 160W
55NAN 080SQA| 1233| 781| 257| 716| 44.2| 16.7| 16.3| 165W
65NAN075SQA| 1454| 900| 271| 838| 58.4| 22.9| 22.6| 200W
65NAN 080SQA| 1452| 906| 295| 839| 44.3| 24.9| 24.5| 200W
Power requirement| AC 100-240 V- 50/60 Hz
Model| 0| 0| GO| 0| CO| Q| 0-0|
Power consumption
---|---|---|---|---|---|---|---|---
55QNED8OSQA| 1233| 781| 257| 716| 44.2| 16.7| 16.3| 165W
55QNED85SQA| 1233| 779| 257| 716| 45.5| 19.9| 19.5| 195W
65QNED80SQA| 1452| 906| 295| 839| 44.3| 24.9| 24.5| 200W
65QNED85SQA| 1452| 904| 295| 839| 44.9| 30.6| 30.2| 250W
65QNED9OSQA| 1444| 898| 295| 834| 29.5| 26.8| 26.4| 290W
75QNED80SQA| 1675| 1029| 359| 964| 44.5| 36.9| 35.9| 240W
75QNED85SQA| 1673| 1027| 359| 963| 44.9| 40.1| 39.1| 315W
75QNED9OSQA| 1665| 1022| 359| 958| 29.5| 37.0| 36.0| 340W
75QNED99SQA| 1665| 1022| 359| 958| 29.5| 39.0| 38.0| 440W
86QNED8OSQA| 1925| 1165| 359| 1105| 46.1| 55.5| 54.5| 370W
86QNED85SQA| 1925| 1165| 359| 1105| 46.1| 57.5| 56.5| 415W
86QNED9OSQA| 1917| 1162| 359| 1098| 29.9| 52.5| 51.5| 485W
86QNED99SQA| 1917| 1162| 359| 1098| 29.9| 55.9| 54.9| 660W
43NAN075SQA| 967| 622| 216| 564| 57.7| 9.3| 9.2| 110W
50NAN075SQA| 1121| 708| 232| 651| 57.7| 12.4| 12.2| 130W
50NAN 080SQA| 1120| 718| 257| 653| 49.2| 14.4| 14.0| 135W
55NAN075SQA| 1235| 774| 232| 715| 58.1| 14.8| 14.6| 160W
55NAN 080SQA| 1233| 781| 257| 716| 44.2| 16.7| 16.3| 165W
65NAN075SQA| 1454| 900| 271| 838| 58.4| 22.9| 22.6| 200W
65NAN 080SQA| 1452| 906| 295| 839| 44.3| 24.9| 24.5| 200W
Power requirement| AC 100-240 V- 50/60 Hz
| | | | | | | |
Mod el| A| B| @| 113| 0| 0| 0-0| Power consu mptio n
70 NANO 75SQA| 1562| 972| 361| 907| 59.9| 28.8| 28.4| 210W
75 NA NO75SQA| 1678| 1027| 361| 964| 59.9| 31.8| 31.4| 250W
75 NA NO8 OSQA| 1675| 1029| 359| 964| 445| 36.9| 35.9| 240W
86NANOYSSQA| 1927| 1167| 361| 1104| 59.9| 45.6| 45.1| 335W
4 31)(27 400 PSF| 973| 611| 187| 572| 85| 8.1| 8.0| 110W
4 3UQ7 500 PSF| 973| 611| 187| 572| 85| 8.1| 8.0| 110W
43U Q800 OPSB| 967| 622| 216| 564| 57.1| 8.9| 82| 110W
43 U0800 °PSI(| 967| 622| 216| 564| 57.1| 8.9| 8.8| 110W
43U Q805 OP SB| 967| 622| 216| 564| 57.1| 8.9| 8.8| 110W
43 14805 °PSI(| 967| 622| 216| 564| 57.1| 8.9| 8.8| 110W
43009 050 PSC| 967| 622| 216| 564| 57.1| 8.9| 8.8| 110W
S OUQ 7 400 PSF| 1130| 719| 235| 663| 86.3| 11.4| 11.3| 140W
5 OUQ7500 PSF| 1130| 719| 235| 663| 86.3| 11.4| 11.3| 140W
SOU Q800 OP SB| 1121| 713| 231| 651| 57.1| 11.9| 11.7| 130W
50 UQ800 OP SK| 1121| 713| 231| 651| 57.1| 11.9| 11.7| 130W
500 0805 OP SB| 112 1| 713| 231| 651| 57.1| 11.9| 11.7| 130W
5000805 OP SK| 1121| 713| 231| 651| 57.1| 11.9| 11.7| 130W
5 OUQ9 050 PSC| 1121| 708| 232| 651| 57.1| 11.9| 11.7| 130W
5 SUQ 7 400 PSF| 1244| 783| 235| 726| 87.1| 14.4| 14.3| 160W
5 SUQ7 500 PSF| 1144| 783| 235| 726| 87.1| 14.4| 14.3| 160W
55U Q800 OP SB| 1235| 776| 231| 715| 575| 14.2| 14.0| 135W
55 UQ800 OP SK| 1235| 776| 231| 715| 57.5| 14.2| 14.0| 135W
55U Q805 OPSB| 1235| 776| 231| 715| 575| 14.2| 14.0| 135W
55 UQ805 OPSK| 1235| 776| 231| 715| 575| 14.2| 14.0| 135W
5 SUQ9 050 PSC| 1235| 772| 232| 715| 575| 142| 14.0| 160W
60U Q800 OP SB| 1356| 851| 269| 783| 57.5| 17.4| 171| 150W
60 UQ800 OP SK| 1356| 852| 269| 783| 57.5| 17.4| 17.1| 150W
600 Q805 OP SB| 1356| 852| 269| 783| 57.5| 17.4| 17.1| 150W
60 UQ805 OPSK| 1356| 852| 269| 783| 57.5| 17.4| 17.1| 150W
60 U4900 OP SA| 1356| 845| 271| 783| 575| 17.4| 17.1| 185W
65007 400 PSF| 1463| 910| 255| 850| 87.8| 21.5| 21,3| 195W
6 5UQ7 500 PSF| 1463| 910| 255| 850| 872| 21.5| 21.3| 195W
6SU Q800 OP SB| 1454| 906| 269| 838| 57.7| 21.8| 21.5| 185W
65 11(1800 OP SK| 1454| 906| 269| 838| 57.7| 21.8| 21.5| 185W
65U Q805 OPSB| 1454| 906| 269| 838| 57.7| 21.8| 21.5| I 85 W
6514805 OP SK| 1454| 906| 269| 838| 57.7| 21.8| 21.5| 185W
6 51)(29 050 PSC| 1454| 899| 271| 838| 57.7| 21.8| 21.5| 205W
Power Ns’ Ire ment| A( 100-240 V- 50760 Hz|
Model| A| B| 13| D| CO| gl| 0-0|
Power consumption
---|---|---|---|---|---|---|---|---
70008050PSB| 1562| 972| 361| 907| 59.9| 28.8| 28.4| 210 W
70008050PSK| 1562| 972| 361| 907| 59.9| 28.8| 28.4| 210 W
75UQ8050PSB| 1678| 1027| 361| 964| 59.9| 31.8| 31.4| 250 W
75UQ8050PSK| 1678| 1027| 361| 964| 59.9| 31.8| 31.4| 250 W
75UQ9050PSC| 1678| 1027| 361| 964| 59.9| 31.8| 31.4| 250W
86UQ9050PSC| 1927| 1167| 361| 1104| 59.9| 45.6| 45.2| 335 W
Power requirement| AC 100-240 V— 50/60 Hz
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>