Shenzhen Wondersound Technology GM3 True Wireless Earbuds User Manual
- June 6, 2024
- Shenzhen Wondersound Technology
Table of Contents
Shenzhen Wondersound Technology GM3 True Wireless Earbuds User Manual
Packing List
Product Introduction
- Except for the operation methods specifically marked in the manual, please do not try to disassemble or replace any parts in the earbuds.
- Don’ t put the earbuds in the water or any others liquid. The earbuds are not waterproof.
- If any liquid enters the product by accidentally, please disconnect and remove the connection immediately.
- Please make sure that there is no water on your hands when Installing or uninstalling the product to avoid electric shock .
- Do not put the product near by the heat source or expose it to the fire source directly.
- Do not put the product in the environment with strong electromagnetic force, otherwise it will cause product malfunction.
Product Specification
- Bluetooth range: ≥10M
- Earbuds battery capacity: 35mAh
- Duration : about 5.5 hours ( headset )
- Charging time : about 1.5 hour ( headset )
- Rated input: 5V 30mA
Charging box Specification
- Battery capacity : 250mAh
- Charging time : about 2.5 hours
- Rated input: 5V 200mA
- (All technical information is subject to actual performance)
Charge the charging box
Connect the charging box to the 5V power adapter with the Type—C charging cable (Reminder: Open or close the charging box, if the red light breathing effect appears, please timely Charge the charging box.)
Relate input: 5v 30mA(headset) 5v 20mA(Charging Case)
LED Indicator Status
Charging| Use the suppled charging cable
Connect Power to charge| Charging of charging box: the white light is always
on during charging of charging box When the box is fully charged: the green
light is always on
---|---|---
Charging Box| Normal Power
Low battery| When the cover is opened or closed, the green indicator will
light up for 5 seconds When the cover is opened or closed, the red indicator
will flash for 5 seconds
Product Operation Instructions
-
Boot Method 1 : Open the cover of the charging box and start the headset automatically;
-
to turn it off Mode 1 : Put the earphone back into the charging box and close the box cover
Mode 2: When the device is not connected to the smart device, the earphone will shutdown automatically after 5 minutes -
pairs Method 1: Open the Bluetooth list of smart devices, search for “Moi P1 ” and Connection (support for single ear use).
- The Operation Of the touch button
Music Play Mode
Left/Right Headset operation
ANC
Right ear operation in binaural mode
Call Mode
Left/right headset operation
Voice assistant
Left headset operation
In addition to the call status touch the left headset for 3 seconds to
activate the voice assistant function (you need to support the connected smart
device)
Warranty Statement
Disclaimer
This user manual does not have any form of guarantee, position expression or
other implication. The mentioned products, specifications and information are
for reference only, and the content will also be updated on the web at any
time without additional separate notice.
Warranty statement: The product attached to this document is guaranteed as
follows: lf the product is twelve (12) months from the date of purchase(
“Warranty Period” ),under normal conditions of use due to quality defects
damaged, can be repaired. Free repair; free replacement if the manufacturer
confirms that it cannot be repaired; repaired or replaced product. Continue to
enjoy the warranty during the remaining warranty period (the shortest not less
than 30 days).Purchased by sale the ticket date shall prevail; if the purchase
date cannot be determined, the warranty period shall be 13 (13) Monthly
calculation.
If you apply for a warranty, please call the product service hotline first and
execute it in the manner instructed by us. When applying for warranty, you
need to provide an accurate, complete and clearly filled out valid sales
invoice. The above guarantee does not apply to the following situations:
- Exceeding the validity period of the three packs;
- Altering the warranty card and product code does not match the product body;
- Causes caused by misuse, abuse or improper transportation, use, maintenance or storage obstacles or damage;
- Failure or damage caused by force majeure (such as earthquake, war, disaster, etc.) or accident bad;
- The zipper and tower buckle are damaged due to excessive force;
- Disconnection or tearing caused by excessive load;
- Any damage caused by sharp objects;
- Products with signs of burning of flooding;
- Damage caused by unauthorized disassembly;
- Aging, discoloration, abrasion, rupture and other losses that occur during the normal use of the product. Warranty statement.
- If the original identification label of the product is changed or damaged, this guarantee will become invalid.
The completeness and appearance of the product and accompanying materials are not within the scope of the guarantee. You should check on the spot and raise objections to any discrepancies.
The above guarantees are all guarantees we make regarding the products, and are only applicable in mainland China. Nothing in this document affects consumer rights that cannot be excluded or restricted under the law profit.
Warranty Card
Product name|
---|---
Username|
Contact number|
Address|
Date of purchase|
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>