H Koenig u600 Shoe Cleaning Machine Instruction Manual

: June 5, 2024
: H Koenig

Table of Contents

IMPORTANT SAFEGUARDS
SAVE THESE INSTRUCTIONS
Cleaning and maintenance
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Instruction Manual
u600

H Koenig u600 Shoe Cleaning Machine

https://www.hkoenig.com/s/24412_135992_lustreuse-a-chaussures-electrique

![H Koenig u600 Shoe Cleaning Machine - figH Koenig u600 Shoe Cleaning Machine

fig](https://manuals.plus/wp-content/uploads/2022/04/H-Koenig-u600-Shoe- Cleaning-Machine-fig-550x464.jpg)

Description

Metal housing
ON/OFF switch
Dispenser cabinet
Polishing brush(right)
Polishing brush(left)
Cleaning brush(middle)
Motor
Mat

IMPORTANT SAFEGUARDS

The device is designed in accordance with the technical regulations in force. Nevertheless, it may involve risks in the event of non-compliance or inappropriate use. Anyone using this equipment must comply with the instructions and recommendations contained in this user manual. When using electrical appliances, basic safety precautions should always be followed including the following:

Read all instructions before using the appliance.
This appliance is not for use by children.
This appliance may be used by persons with reduced physical, sensory or mental capabilities or lack of experience or knowledge provided that they are supervised or instructed in the safe use of the appliance and that they fully understand the potential hazards.
Cleaning and maintenance should not be carried
out by children unless they are at least 8 years of age and
are supervised by an adult.
Please keep packaging materials such as plastic bags or expanded polyester elements out of reach of children. Risk of suffocation!
Close supervision is necessary when any appliances are used by or near children.
Unplug from outlet before cleaning.
Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair, mechanical or electrical adjustment.
The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.
Do not use outdoors.
Do not use it in the washroom or in wet areas.
The appliance is not suitable for installation in the area where a water jet could be used.
The appliance must not be cleaned by a waterjet.
Do not use the unit if its power cable or plug is damaged, does not operate properly, or has been damaged or dropped. If the power cable is damaged, it must be replaced by the manufacturer or its agent or by a qualified person to avoid any risk.”
Do not use appliance for any other intended use.
Never use the unit with wet hands or standing on wet ground.
The safety of the device is only guaranteed if it is used in accordance with its intended use and follows the information presented in the operating instructions.
The manufacturer is not liable for any damage or malfunction due to:
– failure to comply with the instructions for commissioning and cleaning;
– use not in accordance with basic use;
– repairs carried out by the user;
– use of unapproved spare parts.
Keep the appliance and its power cord out of reach of children under 8 years of age.
When using electrical equipment, safety precautions must always be taken to prevent the risk of fire, electric shock, and/or injury in the event of misuse.
Make sure that the voltage rating on the type plate corresponds to the main voltage of your installation. If this is not the case, contact the dealer and do not connect the unit
Never leave the unit unattended while in operation.
Please keep this document at hand and give it to the future owner in case of transfer of your device.
Your appliance has been designed for domestic use only. It is not intended for use in the following situations which are not covered by the warranty:
– in staff kitchen areas in shops, offices, and other professional environments,
– in farm hostels, – by guests in hotels, motels, and other residential environments,
– in bed and breakfast-type environments.

SAVE THESE INSTRUCTIONS

Note: This model is a household shoe polishing machine and works with an intermittent-duty motor. The duty cycle of the motor is designed to run for 5 minutes continuously and then 5 minutes off before restarting again. The motor has an automatic overload thermal cutoff which stops the appliance in case of excessive force which may cause over-heating.In case the overload is tripped, you have to wait for approximately 10-15 minutes before resuming regular operation. ( This depends on the ambient temperature.)

How to use your shoe polishing machine

Press the ON/OFF button on the top of the housing to start the machine. This button is pressed once for ON and again for OFF.
To apply polishing cream to your shoe, lift your shoe and stroke the tap of the dispenser gently. Natural color shoe cream can be used for any colored shoes.
It is strongly recommended that one of the polishing brushes is used for shoes applied with natural color cream and another one, for colored cream. Do not mix the use of these two brushes, or otherwise, it will affect the polishing result occasionally.
When polishing is done, press the ON/OFF button again to switch the machine off.

Refill the shoe cream

By looking through the wax box indication slot, you can notice when the shoe cream should be refilled.
Unlatch the dispenser and have it move outward to open the dispenser cabinet.
Take the bottle out, lose the tap and fill in cream of the same kind. Put the spring and steel ball in proper position before recapping the tap tightly. Also, make sure the exhaust hole on top of the bottle is open. Or otherwise, shoe cream will not flow out smoothly when a tap is stroked. Actually, you can take the blocking pin out from the exhaust hole and throw it away the first time you have your bottle filled.
Put the cream bottle back into the cabinet and latch it in the proper position on the machine.

Cleaning and maintenance

Unplug the unit before cleaning and maintenance.
Do not clean the machine with a water jet.
Dust and mud on the mat can be cleaned by simply taking it out from the machine and having it washed or cleaned by a vacuum cleaner. It is a good practice and important for safety to have the mat dry thoroughly in a cool area before putting it back into the machine. Do not dry the mat under strong sunshine or in hot areas.
When changing the brush is deemed necessary, unscrew the fixing screw on the brush and pull it sideways to take it out from the shaft. Replace the brush following the reversed procedure. Remember to have the screw fixed on the flat D-cut surface of the motor shaft.

This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed of at the end of life separately from your household waste. There are separate collection systems for recycling in the EU.
For more information, please contact the local authority or your retailer where you purchased the product.

Adeva SAS / H.Koenig Europe – 8 rue Marc Seguin, 77290 Mitry-Mory, France
www.hkoenig.com – https://en.hkoenig.com – Tél: +33 1 64 67 00 05