H Koenig mx18 800W Red Multifunction Robot Instruction Manual

mx18 800W Red Multifunction Robot
Instruction Manualhttps://goo.gl/fw5nnz

Important

Read this user manual carefully before using the appliance and save it for future reference.

• Always unplug the appliance before you reach into the blender jar with your fingers or an object (e.g. a spatula).
• Never use your fingers or an object (e.g. a spatula) to push ingredients down the feed tube while the appliance is running.
• Be very careful when you handle the blades or inserts. Be especially careful when you remove them from the bowl or jar, when you empty the bowl or jar, and when you clean them. Their cutting edges are very sharp.
• This appliance may be used by persons with reduced physical, sensory or mental capabilities or lack of experience or knowledge, provided that they are supervised or instructed in the safe use of the appliance and that they fully understand the potential hazards.
• Children should be supervised to ensure that they do not play with the appliance.
• The appliance is for household use only. Keep the appliance out of the reach of children.
• Do not allow children to use the appliance without supervision.
• Check if the voltage indicated on the appliance corresponds to the local mains voltage before you connect the appliance.
• Never let the appliance run unattended.
• Never connect this appliance to a timer switch in order to avoid a hazardous situation.
• Do not use the appliance if the main cord, the plug, or other parts are damaged.
• If the main cord is damaged, you must have it replaced at a service center in order to avoid a hazard.
• Always switch off the appliance by turning the control knob to 0. Switch off the appliance before you detach any accessory.
• Do not pour hot liquids into the blender exceeding a 50 ° temperature.
• Unplug the appliance immediately after use.
• Never immerse the motor unit in water or any other liquid, nor rinse it under the tap.
• Wait until moving parts stop running before you remove the lid of the bowl or jar.
• Do not exceed the maximum content indicated on the bowl of the blender jar.
• The instructions for centrifugal juicers shall include the substance of the following.
• Do not use the appliance if the rotating sieve is damaged.
• Switch off the appliance and disconnect from supply before changing accessories or approaching parts that move in use.
• Do not operate this appliance if it has a damaged cord or plug, if it is not working properly or if it has been damaged or dropped. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent, or a similarly qualified person in order to avoid a hazard.
• The accessories are used with the machine only. And the whole machine is used for food only.
• Thoroughly clean the parts that come into contact with food before you use the appliance for the first time.
• Care shall be taken when handling the sharp cutting blades, emptying the bowl, and cleaning.
• Do not pour hot liquids into the blender exceeding a 50 ° temperature.
• Cleaning and maintenance should not be carried out by children unless they are at least 8 years of age and are supervised by an adult.
• Keep the appliance and its power cord out of reach of children under 8 years of age.
• When using electrical equipment, safety precautions must always be taken to prevent the risk of fire, electric shock, and/or injury in the event of misuse.
• Make sure that the voltage rating on the typeplate corresponds to the main voltage of your installation. If this is not the case, contact the dealer and do not connect the unit.
• Please keep this document at hand and give it to the future owner in case of transfer of your device.
• The device must not be used if it has been dropped, it obvious signs of damage are visible, or if it has leaks.
  Do not mix hot liquid, cool the soup before the mixer Your appliance has been designed for domestic use only.
  It is not intended for use in the following situations which are not covered by the warranty:
  – in staff kitchen areas in shops, offices, and other professional environments,
  – in farm hostels,
  – by guests in hotels, motels, and other residential environments,
  – in bed and breakfast-type environments.

Product

Processor

Attachments

Usage

The adjustment

When you settle down the parts you need, turn on the stepless speed regulation. If you want the food processor to move slowly, turn the adjustment a little. If you need the food processor to move fast, turn the adjustment for more. There is another adjustment: pulse switch. Keep touching the pulse switch, the machine will move. Stop touching the pulse switch, the machine will stop moving.

• Knife blade / Plastic knife blade The knife blade is the most versatile of all the attachments. The length of the processing time will determine the texture achieved. For coarser textures use the pulse control.

Use the knife blade for cake and pastry making, chopping raw and cooked meat, vegetables, nuts, pate, dips, pureeing soups, and to also make crumbs from biscuits and bread.
Do not use the knife blade or dough tool for mixing flour.
To ensure the long life of your machine, not allowed to continuously use it for more than 30 seconds, should cool down the motor for at least 1 minute, for 3 cycles.

• Slicer / Julienne / Potato chipper / Shred discs

Use the Slicer for cheese, carrots, potatoes, cabbage, cucumber, courgette, beetroot, and onions. Use the Julienne / Potato chipper disc for potatoes for Julienne style French fries; firm ingredients for salads, garnishes, casseroles and stir-fries Use the shredding side for cheese, carrots, potatoes and foods of a similar texture.
To ensure the long life of your machine, not allowed to continuously use more than 3 minutes. Should cool down the motor at least 30 minutes before the next operation.

Blender

1. Fit the sealing ring into the blade base and ensure the seal is located correctly. Leaking will occur if the seal is damaged or not fitted correctly.
2. Screw the jug onto the blade base.
3. Put your ingredients into the jug.
4. Put the filler cap in the lid, then turn.
5. Turn the lid in a clockwise direction to lock it onto the jug
6. Place the liquidizer onto the processor base and turn to lock
7. Select a speed or use the pulse control.
8. Don’t move the jug, lid, and filler cap when the machine is working.
9. 600 g carrots/0,9 L water is to be filled.

To ensure the long life of your machine, not allowed to continuously use it for more than 30 seconds, should cool down the motor at least 3 minutes, for 3 cycles.

Clean

• Always switch off and unplug before cleaning.
• Handle the blades and cutting discs with care – they are extremely sharp.
• Some foods may discolor the plastic. This is perfectly normal and won’t harm the plastic or affect the flavor of your food. Rub with a cloth dipped in vegetable oil to remove the discoloration and clean the surfaces which in contact with food.
• Clean the base: wipe the base with a dry rag.
• Clean the parts of the food process (except the base) : put a half a basin of water into the basin, but the parts you want to clean into the water, and then wipe the parts by a rag. After then, wipe the parts with a dry rag.
• Always unplug the device before cleaning it.

Environment
CAUTION:
Do not dispose of this product as it has with other household products. There is a separation of this waste product into communities, you will need to inform your local authorities about the places where you can return this product. In fact, electrical and electronic products contain hazardous substances that have harmful effects on the environment or human health and should be recycled. The symbol here indicates that electrical and electronic equipment should be chosen carefully, a wheeled waste container is marked with a cross.

Adeva SAS / H.Koenig Europe – 8 rue Marc Seguin, 77290 Mitry-Mory, France
www.hkoenig.com – https://en.hkoenig.com – Tél: +33 1 64 67 00 05

References

• H.Koenig : Le spécialiste du petit électroménager
• HKOENIG SAV: Pezzi di ricambio, accessori, FAQ
• H.Koenig customer support
• HKOENIG SAV: Repuestos, accesorios, FAQ
• HKOENIG SAV: Pièces détachées ,accessoires, FAQ

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>