IKEA 804.352.11 Symfonisk Wifi Bookshelf Speaker White User Guide
- June 5, 2024
- Ikea
Table of Contents
IKEA 804.352.11 Symfonisk Wifi Bookshelf Speaker White
QUICK GUIDE
Plug in your SYMFONISK speaker. Go to the Apple App Store (iOS devices) or Google Play Store (Android devices) and search for Sonos. Install and open the Sonos S2 app. Follow the instructions to set up your SYMFONISK speaker.
If you already have a Sonos system:
Open the Sonos app and plug in your SYMFONISK speaker. In the app, select Settings (gear icon) > System > Add Product. Follow the instructions to set up your SYMFONISK speaker.
SPEAKER FUNCTIONS
Play/Pause. Press once to start or stop the music; twice to skip to the next track; three times to jump back one song. Press and hold to add the music playing in another room.
Status Light. Indicates current status of the speaker. See full instruction manual for more information
Volume Up **
Volume down**
| Model name: | SYMFONISK |
|---|---|
| Type number: | E1922 |
| Operating temperatures: | 0°C to 40°C |
(32°F to 104°F)
Network Standby Consumption:| ****
2.15W (HiNA)
For indoor use only
Manufacturer: IKEA of Sweden AB
Address:
Box 702, SE-343 81 Älmhult, SWEDEN
CARE INSTRUCTIONS
To clean the speaker, wipe with a soft moistened cloth Use another soft, dry
cloth to wipe dry.
Additional information:
The full instruction manual and support material can be found at
http://www.ikea.com.
- Choose the country you are in.
Search your product in the search field. Go to Assembly Instructions and Manuals.
IMPORTANT & WARNING!
-
The speaker is for indoor use only and can be used in temperatures ranging from 0ºC to 40 ºC (32°F to 104°F).
-
Do not subject the speaker to
wet, moist or excessively dusty environments, as this may cause damage. -
Never use abrasive cleaners or chemical solvents as this can damage the product.
-
Different building materials and placement of the units can affect the wireless connectivity range.
-
Never install the product in a confined
space. Always leave a space around the product for ventilation.
- Product shall not be exposed to excessive heat such as sunshine, heat sources, and fire or similar.
- No open flame sources, such as candle lights should be placed on the apparatus
- Do not attempt to repair this product yourself, as opening or removing screwed covers may expose you to the risk of electric shock.
Save these instructions
for future use.
RF EXPOSURE INFORMATION
According to RF exposure regulations, under normal operations the end user
shall refrain from being closer than 20 cm from the device. This device
complies with Part 15 of the FCC Rules.
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation Science and Economic Development Canada’s licence-exempt RSS
standard(s).
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation of the device.
WARNING:
Any changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. The item should be handed in for recycling in accordance with local environmental regulations for waste disposal. By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or land-fill and minimize any potential negative impact on human health and the environment. For more information, please contact your IKEA store.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>