Shenzhen Nuohao Technology N61 Desk Lamp Wireless Charger User Manual
- June 5, 2024
- Shenzhen Nuohao Technology
Table of Contents
Shenzhen Nuohao Technology N61 Desk Lamp Wireless Charger
DESK LAMP WIRELESS CHARGER
Thank you for purchasing our product. This product is a smartphone wireless charger, allowing you to easily experience the unlimited fun of digital products. Please read this user manual carefully before using this product and keep it for future reference.
Schematic diagram
Specification
- Input voltage: 9V / 2A Airplads output: 3W
- LED power: 5W
- USB output: 5V / 1A Material: ABS+ PC
- Net weight: 300g
- Product size: 10660277mm
- Wireless output: 5W-7.5W-1 OW-15W
- Product color: black, white
- Light color: white, warm color, warm white
- Transmission distance: 2-6mm
- Charging efficiency: 75%
- Working frequency: 100-205kHz
Charging right way
Compatibility
Apple phone: iPhone 13/13 mini/13 pro/13 pro max/Xs/Max/Xr/X/8/ 8 Plus Samsung phone: Galaxy S20/S20+/S20 Ultra/S 10/S10+/S9/S9+/S8/ S8+/S7/S7 edge/SB edge Plus/Note 10/9/8/7/5 Any of the QI Standard phone.
Instructions
- Touch the switch button<.’.) , can turn on/ off the light and switch the color of the light. Long press to adjust the brightness from 10% – to 100%.
- There are three colors light, white, warm color, and warm white.
- Long press the clock button 0, click set time, long press again to switch the digital area, and the setting will be completed automatically after 5 seconds. The time is set in this way.
- Long press the alarm button 1-:l,, click set time, long press again to switch the digital area, and the setting will be completed automatically after 5 seconds. The alarm clock is set in this way.
- The alarm indicator in the display1,:J. lights up (note that it is not the alarm button), which means that the alarm is set successfully. Press and hold the alarm button 1-:l, for 3 times to cancel the alarm.
- The alarm time is 10 minutes. Touch the alarm button to stop the alarm.
- Long press the clock button 0 to enter the time setting mode. Press the time and alarm buttons(:) +iv, at the same time to switch to the 12-hour mode.
- In the normal time display mode, press the clock and alarm buttons(:) +1-‘l at the same time to turn off the time display. Click the clock button 0 to restore the time display.
Notes
- Please pay attention to the following problems, otherwise, it may lead to abnormal charging, high charging temperature, and intermittent charging Charging, not even charging.
- This product is not equipped with an apple watch wireless charger. You can wirelessly charge the original apple watch Electrical appliances are installed in this product.
- Please use qc2.0 / 3.0 fast charger adapter (9V / 2A) for better charging effect.5V / 2Awill result in an insufficient power supply. This product supports QC and PD protocols.
- Please center the mobile phone in the center of the wireless charging sensing area.
- The charging distance is 2-6mm. Please do not assemble a protective shell thicker than 2mm.
- During wireless charging, the distance range of 6cm from the center point on the back of the mobile phone shall not have any differenceMetal or magnetic objects.
- Lower temperature, faster-charging speed. The charging speed is faster in winter than in summer.
- Children must use this product under the guidance of adults.
Configuration list
- Wireless charger, charging cable, user manual
- The instructions and pictures are all sketches. The final product shall be in kind
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
- This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.