PLB41 PitchLogic Baseall User Guide
- June 5, 2024
- F5 Sports
Table of Contents
Welcome!
Anytime. Anywhere. Any pitch.
STEP 1
CHARGE THE BALL.
Plug the charging pad into a USB port.
The light on the pad will turn red.
Note the matching charging icons on both the pitchLogicball and the charging
pad.
Place the ball on the charging base, careful to align the icons with each
other so that they touch.
The light on the charging pad will change to blue. Allow 3 hours for a full charge. If the light blinks red & blue, the ball is misaligned. Try picking it up for 5 seconds and then resetting it on the pad.
STEP 2
CONNECT THE APP.
Download the app from either the Apple App Store or Google Play.
Open the app and touch the ball to the back of your device. Watch the
“Connection” button.
When the ball is detected, the “Connection” button will turn yellow. Press it to complete the connection.
Don’t set your mobile device on the ground because it may lose
connection with the ball. If you like, set the phone on a small box like the
one your baseball came in.
STEP 3
SET AND PITCH!
Prepare to throw the ball, assuming your normal, preferred stance.
Just before your delivery, pause for a half-second to allow the ball to “set.”
Try not to fidget or spin the ball.
This pause is critical. You have to come to a complete stop before beginning
delivery. Essentially. . . DON’T BALK.
After the “set,” start your delivery.
(the design office of ) john murph
| 3021 CARROLLWOOD DRIVE | WINSTON-SALEM, NC 27103 |
COMPLIANCE NOTICE
FCC ID: 2AX06-PLB41
FCC COMPLIANCE STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
CAUTION: The grantee is not responsible for any changes or modifications
not expressly approved by the party responsible for compliance. Such
modifications could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy, and if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures: –
Reorient or relocate the receiving antenna. – Increase the separation between
the equipment and receiver. – Connect the equipment into an outlet on a
circuit different from that to which the receiver is connected. – Consult the
dealer or an experienced radio/TV technician for help.
This equipment complies with the FCC radiation exposure limits set forth for
an uncontrolled environment. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
DESCRIPTION
| PROJECT | F5 Sports_pitchLogic_Compliance Notice Card_REVISED |
|---|---|
| FILENAME | F5-pitchLogic_Compliance-Notice_MECH_REV.ai |
| CLIENT | F5 Sports, Inc. |
| CONTACT | John Murph; 336-671-6950 |
| DATE | October 9, 2020 |
SPECIFICATIONS
| SIZE | 2.875” x 2.875” |
|---|---|
| COLOR | CMYK; Full bleed |
| STOCK | White Coated; Matte Finish; 80# Cover |
| BINDING | Trim |
| QUANTITY | 500 copies |
PROCESSING / PRE-PRESS
| FILE FORMAT | Adobe Illustrator CC2020 |
|---|---|
| FONTS | None; All fonts converted to outlines |
| LINKS | None |
| PAGES | 2 (Front & Back) |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>