adm LC907900 Connected Watch User Manual

: June 5, 2024
: ADM

Table of Contents

adm LC907900 Connected Watch
Wear it properly
Charge the wristband
Language support
Device connection
Connected watch function description
Steps mode
APP function and settings
Application push
Basic parameters
Product list:
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

adm LC907900 Connected Watch

Wear it properly

The wristband is best worn after the ulnar styloid, adjust the size of the wrist according to the adjustment holes. The sensor should be close to the skin to avoid moving.

Charge the wristband

The connected watch USB charging copper piece is inserted into the 4P direction of the USB socket for charging. Please ensure that it is fully inserted. If it is inserted reversely or not fully inserted, it will not be able to charge.

Install the watch app on your phone
Scan the QR code below to download the APP directly or follow the prompts to enter the mobile application market or search for “FitPro” through Google Play to download. When downloading an application from the mobile application market, please do not use Huawei’s official application store to download the APP, otherwise, Huawei and Honor phones will not be able to provide call reminders and SMS reminders.

Android/IOS
System requirements: Android 5.0 or above; iOS9.0 or above; Support for Bluetooth 4.2

Language support

English
Chinese
Netherlands
Russian
French
German
Portuguese
Spanish
Turkish
Polish
Malaysia
Czech
Slovak

Device connection

Open the phone APP ? Click settings ? Click on the device (LH716) connection. After the pairing is successful, the APP will automatically save the Bluetooth address of the connected watch, and when the APP is opened or running in the background, it will automatically search and connect the watch. Android mobile phone please ensure that the APP runs in the background and the mobile phone system settings are given all permissions such as running the background and reading the contact information.

Connected watch function description

When the device is turned off, touch and hold the function button for more than 3 seconds to turn the device on.
In the Bluetooth address interface of the wristband, press and hold for 2 seconds wrist switch to turn off the phone. Short press will exit the shutdown page.
Watch reset device: This function will clear all data of the wristband (such as step counting).
Under the power on state, touch the short press function key to light up the screen.

Steps mode

Number of steps
Wear the watch and record the number of daily movement steps to view the current real-time steps.
Distance
The distance of motion is estimated based on the number of walking steps. Calorie
Heart rate mode
Heart rate, blood pressure, blood oxygen three-in-one. After entering the heart rate three-in-one test interface for a few seconds, the current heart rate, blood pressure, and blood oxygen test results are displayed.
Note: The test data is for reference only and cannot be used as medical data.
This feature requires a watch to support heart rate and blood pressure sensors.
Multi-sports mode
Running
Under this interface, you can record the calories and duration of running.
Skipping rope
Under this interface, you can record the calories and duration of rope skipping.
Sit-up
Under this interface, you can record the calories and duration of sit-ups.
Message mode
When the connected watch pushes multiple reminder messages, enter this interface to view the last 3 message records.
Sleep mode
When you fall asleep, the watch will automatically enter the sleep monitoring mode. Automatically detect your deep sleep/shallow sleep/wake up all night and calculate your sleep quality. The watch supports viewing sleep time, and other data can be viewed on the APP.
Note : Wearing a watch to sleep will have sleep data and start to detect sleep at 10 o’clock in the evening. Sleeping 3 ~ 4 hours of sleep data will be synchronized to the APP while sleeping. The watch supports viewing sleep time, and other data can be viewed on the APP.
Weather
When the binding of the watch and the APP is completed, the watch will automatically synchronize the weather of the phone. Long press to enter, and you will see the current weather conditions.
Music control
Long press to enter, long press the pause button for 2 seconds, you can control the music currently playing on the phone to pause or continue to play. Previous song button, long press for 2 seconds to play the previous song, next song button, long press for 2 seconds to play next song, back button, long press for 2 seconds to exit the current interface.
More function
Camera
Long press to turn on the phone camera. This function requires the phone to allow taking photos. Shaking the watch can control the phone to take photos 3 seconds automatic shooting. Long press for 2 seconds to exit this function
Looking for
Long press for 2 seconds to find the phone, and the APP will prompt you that the watch is searching for the phone. If your phone is not in a silent state, there will be a sound reminder. Long press to exit the current function.
Theme
Long press for 2 seconds to enter, touch to view three different theme interfaces, long press the theme interface for 3 seconds, the bracelet theme interface will display the theme interface you selected.
Reset
Long pressing this function will reset the watch and clear all data (such as the number of steps).
QR code
You can scan and download the connected watch APP.
Shutdown interface
In this interface, you can see the Bluetooth name (LH716) of the wristband, press and hold the 2 second wrist switch to turn off the phone. Short press will exit the shutdown page.

APP function and settings

Personal information
Please set your personal information after entering the APP. You can set gender – Age – Height – Weight, etc. You can also set your daily goal steps to monitor daily completions.

Application push

Incoming call
In the connected state, if the call alert function is enabled, when the call comes in, the watch will vibrate and display the name or number of the caller. (You need to give APP read address book permission.)
SMS notification
In the connected state, if the SMS reminder function is enabled, the watch will vibrate when there is a text message.
Other reminders
In the connected state, if this function is enabled, when there is a message such as WeChat, QQ, Facebook, etc., the watch will vibrate to remind and display the content received by the app. (You can also view the last three message records in the ring information menu. You need to give the APP permission to get system notifications. The watch can display 20 ~ 40 words.)
Other functions
Turn on vibration to set this function. When there is a call, message or another reminder, the watch will vibrate. If it is turned off, the watch will only have a screen reminder without shaking to avoid disturbing.
Tips for Android users
When using the reminder function, you need to set it to allow “FitPro” to run in the background. It is recommended to add “FitPro” to the rights management and open all permissions.
Alarm setting
In the connected state, 8 alarms can be set. After setting, it will be synchronized to the watch. Offline alarm is supported. After the synchronization is successful, even if the APP is not connected, the watch will be reminded according to the set time.
Looking for a wristband
In the connected state, click the “Look for the watch” option and the watch will vibrate.
Remote photography
In the connected state, start the photo from the wristband and the APP to enter the remote camera interface, shake/turn the wrist/touch the watch, and automatically take a photo after 3 seconds of counting down. Please allow the APP to access the photo album to save the self-portrait
photo.
Wristband dial settings
Under this function, you can select multiple display recommended by the system, click to change the background of the display, you can also select the phone album picture as the background, click on the sync display, the watch will be upgraded to the current selected display.(During this process, the APP will prompt you that you are upgrading. After the upgrade is completed, the watch will automatically restart. After restarting, the theme interface will change to the theme interface you selected.)
Sedentary reminder
Set whether to enable the sedentary reminder function, you can set the reminder interval, if you sit for a long time in the set time, the watch will remind.
Raise your hand to brighten
Turn this function on. When the wristband is in the state of the screen, lift your wrist and turn the screen to yourself to light up the screen.
Do not disturb mode
Turn on the do not disturb mode. You can set the do not disturb time period. During the set time period, the watch stops receiving notification messages to avoid reminding messages.
Device reset
Setting this feature reset will erase all data in the watch (such as step counting).
Remove device
Remove device this feature will erase data and remove device.

Basic parameters

Warning:

Suitable for daily use and washing hand（cannot put the whole bracelet under the water but ok for spilled water). Not suitable for taking shower, swimming and for any water activity.
The waterproof function is not permanent and may weaken after using some time. The following situations may affect the waterproofness of the bracelet. So you should pay attention to avoid below cases when using it:
- The watch is dropped, hit or suffered other shocks.
- Do not make watch contact with soap, detergent, perfume, lotion, oil, etc.
- Other places with high temperature or high humidity.
The watch appears to crash and restart. Please check the phone memory information clear and try again or exit the APP and reopen it.
When the battery is fully charged, it can be used for 1~2 days at high frequency and 4~6 days at low frequency.

Note :
The content of the manual is for reference only and does not constitute any form of commitment. This product is not a medical device. The health data and suggestions provided are for reference only, not as a basis for diagnosis and treatment.