Zhiqi M8 Portable Wireless Bluetooth Speaker User Manual

Zhiqi M8 Portable Wireless Bluetooth Speaker

PREFACE

Dear customer: Thank you for purchasing the M8 Bluetooth Speaker, For your better user’s experience please read the user manual carefully before use. Enjoy the music journey!
Please keep this user manual for your later references!

PACKAGE CONTENT

• 1*M8 Main device
• 1* Type-C cable
• 1* 3.5mm Aux in cable
• 1* User Manual

KEY FUNCTION DEFINITION

1. Strap hook

2. Power: Long press Turn on/off Short press Play/Pause

3. Bluetooth/Phone:
   Long press force to disconnect Bluetooth connection
   Short press switch Bluetooth/
   Aux in mode
   Answer/Hang off phone call

4. Plus: Short press to increase volume Long press to next track

5. Minus:
   Short press to decrease volume Long press to previous track

6. Lights key:
   Short press turn on/off lights TWS pairing:

7. Short press
   on/cancel TWS connection
   Long press to clear away TWS pairing

8. Charging light/Power bank light

9. Bluetooth light

10. TWS light

11. AUX interface

12. TF card slot

13. Type-C interface

14. Power bank output interface

OPERATION INSTRUCTION

BLUETOOTH MODE

1. Turn on the speaker enter into Bluetooth mode,the Bluetooth light starts to flash.Open the Bluetooth on your device search for “M8” and connect to your speaker.If it’s connected successfully,you will hear a prompt tone that“device paired ”. The BlueTooth light is always on, now you can play music on your device by BlueTooth.
2. When the BlueTooth is connected successfully and you make calls with phone, the voice will automatically enter into the BlueTooth hands-free mode.Short press “ ”key to answer an incoming call,Long press to reject call.
   

AUX IN MODE

Please connect 3.5mm audio cable to the headphone of the phone/computer output interface, short press “ ” key switch to AUX in mode.When you hear a prompt tone“AUX in mode”, then you can play music. Due to the lower power supply capability, most computers’ USB interfaces can not meet speaker’s operational requirements.It is not recommended to use the computer’s USB for charging synchronously when you play music in the AUX-in mode while connecting the computer.

TF CARD PLAY

Please insert TF card in the speaker,the speaker will switch mode automatically with a prompt tone “TF card mode”, the speaker will play music saved in card automatically, TF card memory maximum is 32G. (This mode is only apply to some models, please consult the local dealer for details.)

TWS STEREO SOUND PLAY

Turn on two M8 speakers enter into Bluetooth mode. Short press “ ”bottom of one speaker. TWS light starts to flash, the speaker will automatically search the other for TWS connection,if they connected successfully, two speakers will switch into left and right channels automatically. Repeat the Bluetooth connection operation and connect to the phone, If they connected succesffully, music will play on the speaker shows dual stereo sound effect.
Note: This function requires two M8 speakers,make sure both are turned on and in the Bluetooth mode. No Bluetooth connection to any other devices before TWS paring. When TWS is connected, short press“ ”key of one speaker to cancel the

COOL PARTY LIGHTS

Party lights on is defaulted setting when you turn on speaker, Short press“ to turn on/off lights.

TYPE-C QUICK CHARGE

• Do not use power adapter that has not been certificated by safety certification.
•  Power adapter with output 5V-2A is recommended for charging.

1. When you hear a prompt tone “Out of battery”,Please charge speaker as quickly as possible.
2. This speaker supports self-adaption charging . It’s able to choose charging current automatically according to the external rated power of the adapter, When charging by USB interface on computer, the current is smaller and it takes longer time to complete charging.
3. When the speaker is charging, the power light is red and always on. When speaker is fully charged,the power light is green and always on.
   Kindly tips:
   This product is waterproof on daily basis conditions,and it can washes normally. Do not soak the product in water for a long time(If the prodcut malfunction due to water ingress, our company reserves the right of final Explanation).
   Energy-saving:
   The speaker will automatically shut down to save power under below circumstances.
   1.In Bluetooth mode,after 20 minutes waiting for no device pairing.
   2.In any modes, short press “ ”key pause for 20 minutes without any operation the speaker will shut down automatically, Please long press the power key to turn it on again.

POWER BANK OUTPUT

The USB and Type C interfaces of the same charing line are forbidden to be inserted into the speaker simultaneously.

The function of power bank is forbidden when the speaker is charging. Both states can not exist at the same time.

1. USB-A OUTPUT: 5V/1A(Power bank function only works when the speaker is turned on）.
2. Turn on the speaker insert the standard USB cable into the output interface of the power bank, and connect the other end to the mobile. At this time the power bank indicator is green, the green indicator will be off after the mobile is fully charged.
3. Turn off the speaker in the process of using the speaker to charge the mobile, speaker will stand by, power bank function works normally, and the speaker can be awakened by long-pressing the power key.

TECHNICAL PARAMETERS

• Bluetooth version : 5.0
• Charging voltage : 5V/2A
• Product weight: 865g
• Battery capacity: 7200mA
• Rated power: 40W

TROUBLESHOOTING

1. Can not connect to Bluetooth or no sound when playing music?
   Please make sure the speaker is in bluetooth mode,and also make sure your device supports Bluetooth function and Bluetooth has already been turned on searching for devices. Check if there are too many Bluetooth devices around, which might bring difficulties to the searching process. Please turn off another Bluetooth device.

2. What if the TF card doesn’t respond?
   Please make sure the TF card is of good quality, and check whether the audio file is an MP3 playing format,If all problems above are excluded , it might be TF card compatibility issue, you can consider of formatting the TF card to FAT32 or change a different TF card.

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
  To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum distance of 20cm the radiator of your body: Use only the supplied antenna.

References

• WISEPNT.COM

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>