DigiDragon 706Z Computer Series Tablet User Manual
- June 5, 2024
- DigiDragon
Table of Contents
DigiDragon 706Z Computer Series Tablet
ATTENTION
This handbook contains important security measures and the correct use of the product information. in order to avoid accidents. Pis make sure to read the manual carefully before using the device.
- Please don’t be at a hogh temperature. moisture or very dust place
- Please don’t be at a high temperature. Especially,n summer doesn’t put the device in the car when Windows is Closed.
- Avoid falls or Violent collision of the device. don’t make the TFT display screen violent tremor. This could cause the TFT display screen abnormal or damaged.
- Please choose the appropriate volume, Use headphones that should not be too big a volume. If feel tinnitus. Lower the volume or stop using it
- please charge In the following condition.
- The battery power ICONS shows have no power
- The system automatically shuts off, startup after power off soon
- Operation buttons no response
- The machine that the top right comer show red icons
- When the device is in the format or ongoing upload end download file, please don1 suddenly disconnect. This could cause application errors.
- For those who because of damage to the product, repair, or other causes erased the memory, The company shall not be liable for any responsibility, please follow the user manual for the standardized operation to use the device.
- Don’t dissemble the pro\lU1;t, don’t use alcohol, Thinner, or benzene to scrub products
- Don’t use the device one of the places prohibiting to use of electronic equipment in regional (such as the plane)
- Please don1 use the Tablet PC when you in driving or walking down the street,
- USB just only be used for data transmission
The company reserves the right to improve products, products specification and design have any change, The information is subject to changes without prior notice. (This tablet is no waterproof function) ( Remark l All pictures in this manual are just for your reference. products specification and design have any change. The information is subject to changes
Desk
Touch panel
Capacitive touch panel: In The Operation, to cllck, dragging on the touch panel
POWER
startup: Long Press and hold the power button. the system will enter the main interface
shutdown: In the main menu interface, press the power button for about 5 seconds to shut down, The system can hinl the “power off’ option, Click”ok”. you can safely shut down.
Lock screen: Short press the Power button to lock the screen or unlock the screen.
Remark
1. When power is empty. the system will shut down automatically. 2. illegal
turn oH the device,restar1 will scan and restore the disk.it may take a longer
time to enter Into the system
BACK
Short Press BACK button will return the last interface,
MIC Recording
Volume+, Volume-
the buttons on top Volume +, Volume-achieve changes in the volume.
earphone jack
3.5 mm standard earphone jack
Video output Interface
HDMI output interlace
TF card
TF-CARD SOit: external T-FLASH card
Mini USB
MiniUSB jack: you can use it to connect the computer for data transmission,
charging, and external connection USB flash drive
DC Adapter
For charging. your tablet battery
Recovery
When the Tablet is under the condition of the crash, upgrade the firmware.
first use
Battery management and charge
Before first use, please set the device’s battery is fully charged Just need
to connect the adaptor or USB interlace, then you can charge The first two
times charging please keep about 6 hours, alter that you just need 4 hours to
charge.
[ Remark]: This tablet uses Built-in type polymer battery. The charge must be
to choose standard adaptor (Input: AC110-240V 50160Hz Max, 180MA .. Output:
DC5.0~5.5V/1.5A), this device without supply OC charging, USB interface can
charge, Choose USB interlace to charger During the charging, the battery icon
will scroll When finished charging, the battery icon will become green and
stop rolling In order to prolong the service life of the machine, suggest use
out battery power before charge it[Remark]:
- If you long time don’t use this Tablet, , in order to avoid power consumption caused damage. pis charge/play the battery once a month,
- After the low battery shut down. connect DC stapler, the device will remind low battery, charging, need to wait some time until the battery is enough to power to enter into the main menu.
- Device charging should be in standby status to reach normal charging time. Because of device and screen consumption.it may cause longer charging me.
Connection with PC
U Use a USB cable to connect the device to the PC, the device will pop up in
the use connection window. click Turn o,e storage to “?_nnect to PC
Into the load mode, you can copy, and delete the file on the device and the file on the memory card.
Equipment Operation interface
The main interface describe
After s1artup will enter the main interface 
In the main interface, you can Managemenl the main interface software ICONS:
long-press the icons for 3 seconds, after the icons will bigger, then you c.,n
drag them anywhere in the interface
Delete icons: long-press the icons 3 seconds, drag the icons lo the Recycle
Bin icon, once ii become red, Loosen your hand, after that you can delete icon
You touch the screen keep a time, appear the dialog box” Add yo Home screen”
as shown below
status bar describe
The status bar above the screen Top left display,nain Interface software.
T-Flash cc:1rd. USB connection status and so on Top right displays the
battery, battery charge icons, current time, set time, Settings Menu, ESC
butlon.
Use touch panel
The device is equipped with a 7 ·touchscreen. Following the main touch, the
screen area is described and describes some of the tips for how to use the
touch screen. No matter which interface you are on the screen can go hack to
the main screen by pressing the soft key m on the bottom right, comer of the
main screen.
[Attention] The main screen soft key Functions as the machine back key In different applications, by tapping the back soft key in the bottom right, comer on the touch screen, you can return to its interface on the upfront. In different applications, by tapping the menu key Ion the upper right comer of the touch screen, the screen will appear with the operation setting interface as follows,{Remar1t]: The main screen soft key functions as the machine man
In the main interface, you can touch the icon to open the APPs In different browsers (file, music, video, pictures), You shift and drag lhe scroll bar, so that the file list can up or down to roll.
Equipment basic ser
Setting: Click setting icons B, enter setting interface
Silent mode,Volume,Notlfcatlon ringtone ,Audible selection.Screen lock sounds
FCC Caution
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connecting the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV techni help.
Radiation Exposure Statement
The device has been tested and complies with FCC SAR Select Language: 54 kind
of national languages are available Remark: Android system can support 54
kinds of language, now many interface just support 14 languages,
Android keyboard: Android keyboard setting Sound on Key-press Auto-
capitalisation Show suggestions: Display suggested words while typing Auto-
complete: Spacebar and punctuation automatically insert highlighted work
Date & time setting
Set dale, set time, Select time zone and select date format 
Developer options
Choose use work pattern: OTG/HOST/SLAVE 
About tablet
App installer
This Tablet can support Android APP in mali<et by the third party, most Apps
can install in the networks. can copy to NANO FLASH or SD card. Click the App
installer icon, will appear Install, manage, Exit options. Install; Click
install, enter Apk install interface Separately for the Internal Memory disk
and SO Card disk. Select the APK you would like to Install. Click it to
Install. go back to the main menu. will display the installed app you just
selected. Remark: some 3’• APP must install properly by memory card.
downloaded 3” party app may not install properly on the device. Manage: click
manage, enter third PARTYany interface Cllclc Install Icon, will enter Acllon
interface.
Problem solution
The device can’t open
- Check the battery power
- Connect adaptor first, then check again
- After charging then can’t open, pis contact with the supplier
After startup the screen or the opening picture has been appearing, the device appears shutdown
- Power is not enough. please charge Headset can’t hear the voice
- Pis check the volume whether set to O
- Check the music file whether damaged. Try playing other music, if the file has been damaged may lead to serious noise or hop sounds
Can copy Ille or play music and so on
- Pis check between computer and device is the correct connection
- check the memory storage space is already full
- check the USS cable is good or not
- USS connection is disconnected
BASIC FONCTION
