STELPRO SAHUB001 Allia Smart Thermostat User Guide

June 5, 2024
StelPro

STELPRO SAHUB001 Allia Smart Thermostat

View all STELPRO thermostat manual

BEFORE GETTING STARTED

Choosing the location of your devices wisely will optimize Allia’s mesh network and promote efficient communication between the devices. Leave at least 30 cm (12 in.) clearance around the thermostat to ensure adequate ventilation.
For more information, visit www.stelpro.com/allia

All wiring diagrams:
stelpro.com/allia/sat402zb-quickstart-guide

WARNING

  1. To reduce the risk of fire, electric shock or electrocution, CUT OFF THE POWER AT THE ELECTRICAL PANEL and make sure the circuit is switched off.
  2. Always follow the electrical code in effect in your region. The thermostat must be installed by a CERTIFIED ELECTRICIAN.
  3. Connect the thermostat ONLY to a 120 VAC to 240 VAC power source and observe the load limits.

REMOVE THE OLD THERMOSTAT AND ATTACH THE MOUNTING PLATE TO THE ELECTRICAL BOX.

NOTE: Loosen the screw under the thermostat slightly to remove the mounting plate from the thermostat.

**CONNECT THE ELECTRICAL WIRES

STELPRO SAHUB001 Allia Smart Thermostat-
FIG2**

  1. UNIVERSAL CONNECTION
  2. ALTERNATIVE CONNECTION
  3. CONNECTION

**ATTACH THE THERMOSTAT TO THE MOUNTING PLATE

STELPRO SAHUB001 Allia
Smart Thermostat-FIG3**

CONFIGURE THE INITIAL SETTINGS

CONTROL BUTTONS

Press for 3 seconds to access the advanced menus. Press to confirm.

  • MENU 20
    TEMPERATURE FORMAT (°C / °F)

  • MENU 30
    HEATING MODE
    Baseboard (OFF) / Fan Heater (ON)

  • MENU 31
    LOBBY MODE
    Standard Room (STD) / Lobby (LbY)
    Lobby mode is an option only in Fan Heater mode.

**INSTALL AND CONFIGURE THE ALLIA APP

STELPRO SAHUB001 Allia Smart
Thermostat-FIG5**

PAIR THE THERMOSTAT TO THE ALLIA ECOSYSTEM.STELPRO SAHUB001 Allia Smart
Thermostat-FIG6

  1. In the Allia application, click on the + in the device tab.
  2. Select thermostat as device type.
  3. On the thermostat, access menu 10 by pressing the central button for 3 seconds and select the automatic connection option (ON). Press the central button to confirm the selection.

Visit our website to get more information, learn everything there is to know about Allia or view the complete user guide. www.stelpro.com/allia

STELPRO SAHUB001 Allia Smart Thermostat User Guide

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

StelPro User Manuals

Related Manuals