mophie WPC003-1 Wireless Charger User Manual
- June 5, 2024
- Mophie
Table of Contents
mophie WPC003-1 Wireless Charger
Wireless Charger- WPC003-1
This wireless charger can charge your Qi-enabled smartphone. Just simply place your smartphone on the rubber mat above the wireless charger. The wireless charger supports up to 5W power delivery.
NOTE: The wireless charger may not work if your phone case is metal. Take the phone out of the case and place the phone on the charger.
FCC Certification
FCC ID:2AXPS-WPC003-1
The devices listed above comply with Part 15 of the FCC rules and Industry
Canada’s license-exempt RSS Standard(s) and EU Directive 2014/53/EU. Operation
is subject to the following two conditions:
- This device may not cause harmful interference; and
- This device must accept any interference received, including interference that may cause undesired operation.
Note: Radiation Exposure Statement
The product complies with the FCC/IC RF Exposure for Low Power Consumer
Wireless Power Transfer. RF exposure limits set forth for an uncontrolled
environment and are safe for intended operation as described in this manual.
The further RF exposure that compliance was demonstrated at 20cm and greater
separation from the user body or set the device to lower output power if such
function is available.
Canada
CAN ICES-3 (B)/NMB-3(B)
Caution: This equipment and its antennas must not be co-located or
operated with another antenna or transmitter.
Caution: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment.
Radiation Exposure Statement: This equipment complies with radiation
exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with a minimum distance of 20 cm between the
radiator and your body. Frequency band in which the radio equipment operates:
110~115kHz
Speacification
- Maximum power transmitted: < 0.01mW
- Model name: Wireless Charger
- Manufacturer: BCS Automotive Interface Solutions(Suzhou)Co., Ltd. Model Number: WPC003-1
- Max. Output: 5W
- Input: 13.5V 1A
- Operating Temperature: -40℃~85℃
- Storage Temperature: -40℃~105℃
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>