mophie 401105901 Powerstation Go Wireless Portable Car Jump Starter Instruction Manual

Powerstation Go Wireless Portable Car Jump Starter

mophie

PowerStation’ go wireless

OPERATING INSTRUCTIONS

mophie power station go wireless
Thank you for choosing mophie!
Powerful, compact and easy to use, the mophie
PowerStation go wireless can safely jump start your car.
In addition, you can use it to charge your phone, tablet
or other electronic devices. Equipped with wireless
charging to charge compatible smartphones, the
mophie power station go wireless also features a
convenient LED floodlight.

  Safety precautions
DANGER-CAUTION Read and understand all safety
information before using this product. Failure to
follow these instructions may result in electrical
shock, explosion, fire which may result in serious
injuries, death and property damage.

– When used correctly, lithium-ion rechargeable batteries
provide a safe and dependable source of portable
power. However, if they are misused or abused, this
may result in leakage, burns, fire or explosion, causing
personal injury or damage to other devices.

– Misusing or incorrectly connecting your mophie
power station go wireless may cause electric shock to
users and damage equipment.

– Do no operate in explosive atmospheres such as in the
presence of flammable liquids, gases or dust.

Remove jump start clamps from vehicle battery after
jump starting vehicle.

– Keep your mophie power station go wireless dry and
away from moisture and corrosive materials. The
mophie power station go air should not be used near
water or wet areas such as bathtubs, showers,
bathrooms, sinks, swimming pools or basements.

– Do not expose your mophie power station go wireless
to moisture, water, rain, or snow.

– Keep your mophie Power Station go air away from heat
sources, including open flames, radiators, stoves,
ovens, and any other devices that product heat.

– The lithium-ion rechargeable battery used in this
charging device may present a risk of ire or chernical
burn if mistreated, Do not expose to fire or excessive
temperature. Do not expose to heat above 212°F
(100°C) or incinerate.

-In the unlikely event of leakage or explosion use sand
or a chemical fire extinguisher.

– Your mophie powerstation go wireless may become
warm under extended high power operation. Do not
cover, wrap, or otherwise restrict the mophie
powerstation go air during operation.

– Do not disassemble your mophie powerstation go
wireless. There are no user-serviceable parts inside.
Incorrect reassembly may result in shock or fire hazard.

– Do not drop or subject to strong impacts. Do not
operate your mophie powerstation go air if it has
received a sharp blow, or has otherwise been damaged
in any way.

– Do not puncture, crush or subject to mechanical shock.

– Only charge your mophie powerstation go wireless by
the specified method with the specified charging
adapter provided with the unit.

– Do not use any non-mophie-branded accessories with
the mophie powerstation go air. Doing so may cause
electric shock to users and damage equipment.

-The mophie powerstation go wireless, along with its
accessories, are not toys and should be kept away from
children.

-Make sure the jumper cables are fully plugged into the
jump start output before trying to jumpstart your
vehicle.

– Do not touch red (positive) and black (negative) jumper
clamps together at any point.

– Do not insert any foreign object into the ports or
openings of your mophie PowerStation go wireless.

– Do not clean your mophie powerstation go wireless
with harsh chemicals, soaps or detergents. Just wipe
the case with a soft cloth.

– Make sure the mophie powerstation go wireless
charging ports do not become contaminated with lint
or other debris. Use a canned-air type of product
periodically to ensure that the port openings are clear.

– When using the air compressor, always check and
follow the manufacturer’s recommended pressure. Use
caution as the air hose and connectors may get hot
after extended use.

– Batteries should be recycled or disposed of as per state
and local guidelines.

– Storage: -4°F – 131°F (-20°C – 55°C), Discharge: 14°F –
122°F (-10°C – 50°C), Charge: 32°F – 113°F (0°C – 45°C)

Included items

– mophie psg wireless
– Jumper Cables
– 14V Charging Adapter
– Car Charger
– Carrying Pouch

Location of controls

1. Wireless-Charging Pad
2. Jump-Start Output
3. Jump-Start Button
4. Digital Screen
5. Device Kickstand
6. USB/Wireless-Charging ON/OFF Button
7. USB Outputs 1&2
8. LED Floodlight
9. LED Floodlight Button
10. Positive Clamp (red)
11. Negative Clamp (black)
12. Jump-Start Plug
13. Car Charger
14. 14V Charging Adapter
15. 14V Charge Input

Operating instructions
Please make sure your powerstation go wireless is fully
charged before use.

Charging the powerstation go wireless
To charge the powerstation go wireless, use the
provided AC charging wall adapter, and plug the AC
adapter tip into the powerstation go wireless charge
input

Next, connect the AC adapter into a wall outlet. The
powerstation go wireless will automatically begin
charging. When the powerstation go wireless is fully
charged, all five indicator lights will be solid white (this
could take up to 9 hours).

While charging, the digital screen will illustrate the
charge percentage of the powerstation go wireless.
When fully charged, disconnect the cable.

NOTE: The powerstation go wireless is designed to
charge between 32°F-113°F (0-45° C). A“TEMP’ indicator
will be illustrated on the digital display if the powersta-
tion go wireless is atternpted to be charged outside of
this temperature range.

When you’re on the road, you can also use the supplied
Car Charger to charge your powerstation go wireless.

Jump starting your vehicle with the powerstation go wireless

1. Plug the jumper cables into the jump-start output on
the powerstation go wireless.

NOTE: Make sure the jumper cables are fully plugged
into the jump-start output before trying to jump your
vehicle,

2, Attach the jumper-cable clamps to the vehicle battery.
– Red clamp on positive terminal (+)
– Black clamp on negative terminal (-)

NOTE: Do not touch red (positive) and black (negative)
damps together at any point. If the jump-start button
flashes and the SAFETY CHECK FAIL indicator is visible
on the digital display screen, the jumper cables have
been connected incorrectly. If this flashing red condition
occurs, disconnect the jumper cables from the mophie
powerstation go wireless and the vehicle battery and
restart the process from Step 1

3. Press the button and wait for a solid green light.

4, Start your vehicle.

NOTE: If your vehicle fails to start after the first attempt,
wait 30 seconds and repeat step 3 and step 4

Ifyour vehicle does not start after three attempts, we
recommend you consult a certified mechanic.

5. Disconnect the jumper-cable clamps from the car battery.

NOTE: The jump start function can not be used in
conjunction with the USB or wireless charging pad.
Please ensure that you have not activated the USB when
attempting to jump start your vehicle.

Jump Starting troubleshooting tips

Charging a compatible smartphone using wireless charging

1 First, make sure your smartphone is compatible with
wireless charging

2. Place your wireless-compatible device on top of the
powerstation go wireless and press the USB/Wireless
ON/OFF Button. Charging will begin.

3. Check your smartphone to confirm itis charging. If itis
not charging, adjust the position of the phone on top
of the powerstation go wireless

NOTE: Ensure there is no metal obstruction on the back
of the phone or phone case, or credit cards inside the
phone case while wirelessly charging

Wireless charging troubleshooting tips

Charging an electronic device using the

USB output ports
1. Using the USB cable that came with your phone or
device, plug in the Standard USB connector into
either one of the powerstation go wireless’ two USB
Output ports

2. Turn on the USB charging feature by pressing and
releasing the USB/Wireless ON/OFF Button on the powerstation go wireless.

NOTE: The powerstation go wireless USB charging feature will automatically power off after 30 minutes of inactivity.

mophie smart charge technology

Your mophie powerstation go wireless contains mophie
SMART CHARGE TECHNOLOGY to achieve greater
compatibility for charging standard 5V USB electronic
devices. mophie SMART CHARGE TECHNOLOGY will allow
the powerstation go wireless charger to communicate
with your electronic device and provide the fastest and
safest charge for that device.

Compatibility

Standard 5V USB electronic devices including: mobile
phones, tablets, PSP, NDS, MP3, MP4, MP5, Bluetooth,
GPS, cameras, and more.

Using your powerstation go wireless floodlight
The floodlight can be turned on and off by simply
pressing and releasing the floodlight ON/OFF button.
The floodlight will automatically turn off after 2 hours of inactivity.

NOTE: Do not look directly into the LED floodlight.

Watch while charging.

Your mophie powerstation go wireless is equipped with
a fold-out kickstand so that you can easily watch your
favorite movie or TV series while charging your phone.

Specifications

Battery Cells: 3x 4000 mAh cells
Battery Pack Energy: — 44400 mWh
Input; av 0070.85
Wireless Output; OW
USB Output: 2x USB 5V DC/2.4A
Dimensions: 182 mm x 97 mm x40 mm
Weight; 590g

Operating Temperature (Charge): _32°F- 113°F (0°C-45°C)
Operating Temperature (Discharge):14°F – 122°F (-10°C-50°C)
Storage Temperature: = 131°F (-20°C = 55°C)

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

– This device may not cause harmful interference, and

– This device must accept any interference received,
including interference that may cause undesired
operation.

15.21

You are cautioned that changes or modifications not
expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.

15.105(b)

This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation, This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications.

However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference
by one or more of the following measures:

– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV
technician for help.

CAUTION: To comply with the limits of the Class B digital
device, pursuant to Part 15 of the FCC Rules, this device
must be used with certified peripherals and shielded cables.
All peripherals must be shielded and grounded, Operation
with non-<certified peripherals or non-shielded cables may
result in interference to radio or reception.

Limited warranty
What does this limited warranty cover and how long
is the coverage?
mophie warrants its products to be free from defects in
material and workmanship under normal use and service
for a period of ninety (90) days beginning on the date your
purchase the product.

What is not covered by thi fed warranty?
This Limited Warranty does not cover defects or damage
due to: (1) accidents, acts of God, misuse, abuse, abnormal
use, abnormal conditions, improper storage, or exposure to
liquid or moisture, (2) unusual or abnormal physical force or

impact, including dropping of the product, (3) connection
of the product to improper voltage supply, or (4) attempted
repair or modification by anyone other than mophie or a
facility authorized by mophie.

What are mophie’s obligations under this limited warranty?
Provided that you comply with the conditions of this
Limited Warranty, during the duration of this Limited
Warranty mophie will repair or replace the product, at its
sole option, without charge. When repairing or replacing a
product, mophie may, at its sole option, repair or replace the
product with new, used, rebuilt or reconditioned parts or
products. mophie will warrant any product that is repaired
or replaced under this Limited Warranty for a period equal
to the remaining time period under the original Limited
Warranty or ninety (90) days, whichever is longer.

What are the limits of mophie’s 2
This Limited Warranty sets forth the full scope of mophie’s
obligations and liabilities with respect to the product. All
implied warranties, including, without limitation, implied
warranties of merchantability and fitness for a particular
purpose, are limited to the duration of this Limited
Warranty. In no event shall mophie be liable for any
incidental, special, consequential or punitive damages or
any damages or losses of or to electronic equipment or
products that are used with any of mophie’s products.

How does state law relate to this limited warranty?
Some states do not allow limitation on how long an implied
warranty lasts or the disclaimer or limitation of incidental or
consequential damages. Therefore, some or all of the
disclaimers and limitations above may not apply to you.

FCC Radiation Exposure Statement
‘The device hasbeen evaluated to met general BF exposure requirement.
‘The device canbe used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>