Shenzhen Haynie Technology RO-01 Mini Sound Bar Instructions
- June 5, 2024
- Shenzhen Haynie Technology
Table of Contents
Shenzhen Haynie Technology RO-01 Mini Sound Bar Instructions
Instructions:
-
.Encoder volume knob: turn counterclockwise to decrease the volume, and turn clockwise to increase the volume.
-
Power switch key : long press to turn on, long press again to turn off.
Clock setting : in the clock mode, short press the “play” Key to enter the clock setting interface, short press the “play” button to enter the “hour/minute” setting, and adjust the hour/minute through the previous/next Track. -
M key/mode conversion : Short press toggle function mode : Clock/Bluetooth/U disk/ TF card /AUX/MIC. Set Alarm: In the clock mode, long press the “mode” key to enterthe alarm setting interface, short press “play” to enterthe “hour/minute” setting, adjust the hour/minute through the previous/next Track, After setting the alarm, it will automatically turn on ,The bell icon is on. After the alarm rings, press any key to stop the alarm. You can turn on/off the set alarm by double-clicking the “mode button”,Turn on the alarm and the alarm icon will light up. Turn off the alarm and the alarm icon light off.
-
Previous Track : In the Clock/alarm clock Mode, Adjust the change of digital time. In TF card mode:Previous Track music.
-
Next Track: In the Clock/alarm clock Mode, Adjust the change of digital time. In TF card mode:Next Track music.
-
Digital tube display: display function operation, such as: clock/Bluetooth/U disk/TF card/AUX/MIC. .
-
Charging port: Tepy-C. Input: DC5V/1A. Built in Battery: 1800mAh.
-
U disk: Can play already downloaded MP3 file format songs, support lossless decoding.
-
TF card : Can play already downloaded MP3 file format songs, support lossless decoding.
-
AUX: Audio input for external devices, such as computers, mobile phones, tablets,etc.
-
.MIC: 3.5mm standard Wired microphone input, You can also plug in a wireless microphone receiver and use the karaoke function.
Please read the instructions carefully before using this product. It contains important information. Please keep it for future use.
FCC ID:2AITS-R0-01
This device complies with Part 15 ofthe FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation. changes or modifications not
expressly approved by the party responsible for compliance could void the
user’s authority
to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 ofthe FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
ofthe following measures:
~ Reorient or relocate the receiving antenna.
~ Increase the separation between the equipmentand receiver.
~ Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected. -Consult the dealer or an experienced
radio/TV technician for help.