Shenzhen Qianlinjing Technology QV13 2.4G Wireless Mouse User Guide
- June 5, 2024
- Shenzhen Qianlinjing Technology
Table of Contents
Shenzhen Qianlinjing Technology QV13 2.4G Wireless Mouse
Thank you for purchasing our company’s wireless-charging mouse. In order to know more about the operation and product characteristics, we recommend that you consult the manual before using it.
Introduction
0verview Of The Device
- 3D scroll wheel
- Left Button
- right button
- DPI Switch Button (3/4levels)
- Forward Button
- Backword Button
- Charging Port
- Foot Pad
- Stickers
- OPower Switch (3 gears)
- Optical Sensor
- Receiver Trough
Functions
Open the box, then take out the Nano Receiver from and insert it into the
computer USB port. Turn the mouse power switch (3rd gear) to “ON”, then wait
3-5 seconds ,the mouse will automatically drive .Move the mouse or tap
the left or right button
DPI Switch Button
Use the DPI button to toggle tracking sensitivity to your reference
DPIresolution can be adjusted from 800-1600/2400 DPI via the DPI Switch
button(800-1200-1600/2400)
Forward Button
Click forward button to go to next page when browsing the website.
Backward Button
Click forward button to go to next page when browsing the website.
Power switch (3 gears)
“OFF: Turn off the power
“ON”: Turn on the mouse function
“O”:Turn on the backlit colorful breathing light
Features techniques
- Transports: 2.4G wireless-charging mouse DPI(Min/Max): 800-1200-1600/2400
- Number of buttons: 6
- Rating voltage/current: DC 3.7V/<18mA
- Supported operating systems:
- Windows Vista /Wind ows XP/windows
- Windows8 /Windows10
- Unpackagedproduct dimensions
- 138mm (L) x80mm(W]x38mm[H)+0.2mm
- Charging Port: MICRO USB
- Unpackaged product dimensions: 125g
- Battery Capacity: Polymer Battery 600ma
Package Contents
Wireless Mouse with Nano Receiver Instruction Charging Cable
System requirements
Windows Vista/Windows XP/Windows7/Windows 8/Windows 10
Installment
Plug and play It supports plug and play. The computer will automatically
detect the mouse without a driver or CD after the NANO receiver is connected
to the USB.
Note: The DPI button you can adjust the resolution from 800 to1600 DPl
tooptimize the resolution of your mouse. It is recommended to use this mouse
on a dedicated mouse pad for optimal performance.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement. This equipment complies with FCC’s RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna(s) must not be co- located or conjunction with any other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>