HALL RESEARCH VERSA-4K Receiver User Guide
- June 5, 2024
- HALL RESEARCH
Table of Contents
HALL RESEARCH VERSA-4K Receiver
The VERSA-4K Windows™ Software Provides the Following Functions
- Dynamic Device Finder — Automatically scans the devices on the Network and shows the real time information (Device Name, Group and IP) on Scan Tab
- General Device management features includes:
- Frame Grabber (Shows Video Snapshot at Sender/Receiver end)
- IP Configuration
- Device Reboot and Factory Default
- Device Name and Group ID configuration
- Audio Mode and Gain Management
- UART Mode and Bit rate configuration
- Advanced Encoder(VERSA-4K-S) management features include:
- EDID Management
- Video Bit rate and Quality Control
- USB Client View (Shows the list of USB Devices currently exported to the Host PC)
- Advanced Decoder (VERSA-4K-R) management features include:
- Independent Routing
- Video Blank and Pause
- Scalar Configuration
- Video Wall Configuration, which includes Bezel and Gap Compensation and Pixel wise Shifting and Scaling
- OSD Configuration, which includes Uploading Text and Image
- USB Device View (Shows the in the information of all connected USB Devices in tree view)
- USB 2.0 Device Filtering and Policy configuration
- DVM — Dynamic Virtual Control Matrix
- DVM : List of Sender and Receivers in Matrix layout, where user can quickly switch the group of the Receiver by selecting the sender form a dropdown list.
- Export Current Matrix configuration as Preset
- Preset Management
- Save and Recall Presets
- Each Preset executes a list of actions.
- An action can be changing Group, Device Name, Video Wall, and USB Pairing.
Tabs
ScreenShots
Scan Tab:
Audio Configuration
Frame Grabber
Video Wall Config
OSD Config
Preset:
Action
DVM Matrix
© Copyright 2019. Hall Research, Inc. All rights reserved. 1163 Warner Ave., Tustin, CA 92780 Ph: (714)641-6607
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>