HelloBaby HB6588 2.4GHz Digital Wireless Video Baby Monitor User Manual
- June 5, 2024
- HelloBaby
Table of Contents
HD 720p
Ver:1.2
User Manual
2.4GHz Digital Wireless Video Baby Monitor
Model: HB6588
The pictures are references only. please subject practicality.
www.hellobaby.net.cn
service@hellobaby.not.cn
Thank you for purchasing the HB6588 Baby Monitor. With our baby monitor, you
could see and hear your baby sleeping or playing in their room anytime.
Please retain your original dated sales receipt for your records. For the
warranty service of your product, you will need to provide a copy of your
dated sales receipt to confirm the warranty status. Registration is not
required for warranty coverage.
Please make sure the following are included in your package
Parent unit x 1
User manual x l
Camera unit x 1
Wall-mounting kit x 1
Power Adapter x 2
SAFETY INSTRUCTIONS
CAUTION: Keep the device away from children.
Strangulation Hazard: Children have STRANGLED in cords. Keep this cord
out of the reach of children (more than Mt (0.9m) away). Never use extension
cords with AC Adapters. Only use the AC Adapters provided.
Choking hazard: This product contains small parts, please be careful when
unpacking and assembling the product.
Read and keep to Instructions: All the safety and operating instructions
should be read before the video baby monitor Is operated. This product cannot
replete responsible adult supervision.
Water and moisture: This product is designed for indoor use only. The
unit should not be exposed to rain, moisture, dripping, or splashing. No
objects filled with liquid should be placed on top of, or beside the product,
such as a glass or vase. This Item should not be used near water.
DO NOT: Use the appliance if the cord or plug is damaged. If your baby
monitor is not operating properly or has suffered any damage, contact “The
Videotimec service center to request inspection and repair of the appliance in
order to avoid any possible risk.
DO NOT : Do not attempt to repair or adjust any of the electrical or
mechanical functions of the unit. Otherwise, the guarantee will be made void.
Ventilation: This baby monitor should not be used on a bed, sofa, rug, or
similar surface that may block the ventilation openings, or be placed in an
enclosed area such as a bookcase or drawer that may Impede airflow.
Keep away from sources of heat: This unit should not be exposed to direct
heat sources such as a candle, radiator, heat register, stove, or other
appliance that emits heat. The unit Should not be left In direct sunlight.
Power source: This unit should only be used with the AC power adapters
Included in this package (rated 5V DC 1.2A).
Damage requiring service: This unit should be serviced by qualified
personnel only when: Objects have fallen or liquid has been spilled into the
product; The units have been exposed to rain;
- The units do not appear to operate normally or exhibit a distinct change in performance;
- The units have been dropped or the enclosure damaged;
WARRANTY TERMS
We offer a one-year warranty from the original purchase date against defects in workmanship and materials. If you have warranty or support issues, please contact our after-sales service via email.
INSTALLATION GUIDELINES
- To use your parent unit and camera unit together, you have to establish a radio link between them, and the range will be affected by environmental conditions.
- Any large metal object, like a refrigerator, a mirror, a filing cabinet, metallic doors, or reinforced concrete between the baby and parent unit may block the radio signal. The signal strength may also be reduced by other solid structures, like walls, or by radio or electrical equipment, such as TV, computers, cordless or mobile phones, fluorescent lights, or dimmer switches.
- Use of other 2.4GHz products, such as wireless networks (Wi-Fl routers), Bluetooth systems, or microwave ovens, may cause interference with this product, so keep the baby monitor away at least 5ft (1.5m) from such products, or turn them off if they cause Interferences.
PLACEMENT OF THE BABY MONITOR
The camera can be placed on the desktop or mounted on the wall. Don’t place the baby monitor on soft quilts or blankets or in the corners of cupboards, shelves, etc; Keep the baby monitor away from heat sources such as radiators, chimneys, cookers, and direct sunlight; Keep the baby unit away from TV sets, microwave oven, and radios. If interference occurs, move the camera elsewhere;
- Place the camera within 6 feet (2 meters) of the area being monitored for optimum performance.
GETTING STARTED
5.1 TURN ON THE BABY UNIT:
- insert the DC plug of the power adapter into the DC jack in the rear of the Baby Unit;
- Insert the other end of the power adapter into a suitable electrical outlet;
- Once the adapter is connected, the power LED will light up;
5.2 TURN ON THE PARENT UNIT:
- Insert the DC plug of the power adapter into the DC jack on the side of the parent unit;
- Insert the other end of the power adapter into a suitable electrical outlet;
- Press and hold the power key for 3 seconds on the side of the parent unit;
- Once the parent unit is on, the power LED will light up and the image will display on the LCD
5.3 INFRARED NIGHT VISION (AUTOMATIC)
The infrared night vision function allows the camera to pick up images in dark or low light conditions. In this mode, only black and white images will be displayed on the monitor, the optimum image lie where the baby unit is 6ft (2m) away from the object. The camera is in night vision mode, the icon will be displayed on the top of the screen.
PRODUCT OVERVIEW
6.1 ICONS OVERVIEW:
6.2 PARENT UNIT OVERVIEW:
6. 3 BABY uNiT OVERVIEW:
KEY OPERATION
7.1 TURN ON/OFF
Press and hold the power ****to key for 3 seconds to turn on /off the parent’s unit.
7.2 VOLUME ADJUSTMENT
Press the key to increase the volume. Press the key to decrease the volume.
Note: The volume has 8 levels. The default volume level setting is level
4.
7.3 DISPLAY BRIGHTNESS ADJUSTMENT
Press the . key to increase the brightness, press the key to decrease the
brightness.
Note: The brightness has 8 levels. The default brightness level setting
is level 4.
7.4 REMOTE PAN-TILT
You can remote pan-tilt the camera.
- Press the Pan-title key, and the direction arrow icon will display on the LCD screen.
- Press the the to pan the camera.
- Press the stat to tilt the camera.
- Press the Return Key exit.
7.5 Two Way Talk
Press and hold the Cl key to enter two-way talk mode. A microphone icon will
be displayed in the corner of the LCD screen. Release the key to stop.
Note: When you are in the two-way talk mode, the parent unit speaker is
muted.
MENU OPERATION
8.1 LULLABY SETTING
You can soothe the baby to sleep by playing a gentle lullaby from the baby
unit.
- Press the MENU key and the menu will pop up.
- Press the key until the lullaby icon is selected by a blue box.
- Press the key to select one of 5 available lullabies or loop (5 lullabies) playback .
- Press the to confirm.
- Select stop icon m to stop. 6. Press the Return Key(E)to exit.
Note: The lullaby default setting is OFF.
8.2 VOX SETTING
This option in the parent unit menu allows you to set the microphone sensitivity of the baby unit. The microphone sensitivity determines what noise level the baby unit pick up, e.g. you would like to hear your baby’s cries, but you may be less interested in its babbling.
- Press the MENU key (and the menu will pop up.
- Press the key until the Vox icon tit/et is selected by a blue box.
- Press the key to select the desired level.
- Press the Cpto confirm. The icon shows on the LCD screen.
- Select icon and pressapto cancel vox setting.
Note: The noise loud icon is a low sensitivity level.
Note: The noise low icon to is high sensitivity Level.
8.3 FEEDING TIME SETTING
- Press the MENU key) and the menu will pop up.
- Press the key until the Feeding Time icon is selected by a blue box.
- Press the key to select the feeding alarm time you need.
- Press the to confirm. The Feeding Time icon shows on the LCD screen.
Note 1: The minimum setting is 0.5 hours, and the maximum setting is 6
hours (5 levels).
Note 2: The Feeding alarm default setting is OFF.
Note 3: Select the icon and press to cancel the feeding alarm setting.
8.4 ZOOM SETTING
- Press the MENU key and the menu will pop up.
- Press the key until the Zoom icon CL is selected by a blue box.
- Press the key to select the Zoom xl,x2, x3.
- Press the to confirm. When selecting Zoom the Zoom icon 42/ +t on the LCD screen.
Note 1: The Zoom setting has 3 levels.
Note 2: The Zoom default setting is level 1.
8.5 TIME SETTING
- Press the MENU key and the menu will pop up.
- Press the key until the Time icon is selected by a blue box.
- Press the key to select the timing method 12H or 24H.
- Press the to enter the sub-menu.
- Press the key to select Hour or Minute.
- Press the key to set the time hour and minute.
- Press the Return Key one time to exit the sub-menu, and two times to exit the Time Setting menu.
8.6 TEMPERATURE SETTING
- Press the MENU key and the menu will pop up.
- Press the key until the thermometer icon is selected by a blue box.
- Press the key to select the Degrees Centigrade (t) or Degrees Fahrenheit (°F).
- Press the to confirm, that the corresponding temperature shows on the LCD screen.
8.7 ADD CAMERA
- Press the MENU keya and the menu will pop up.
- Press the key until the camera adding icon is selected by a blue box.
- Press the key to select your desired add camera.
- When the Pair sign is displayed in 30 seconds countdown on the LCD screen, press the PAIR button on the back of the camera.
- Once paired, along with blue the paired camera icon shows on the LCD screen.
- If fails, repeat the above steps.
Note. Blue means it is well registered.
8.8 DELETE CAMERA
- Press the MENU and the menu will pop up.
- Press the key until the camera deleting icon is selected by a blue box.
- Press the key to select your desired delete camera.
- Press the key, and the icon In and MI will appear.
- Select and press key to delete the camera.
8.9 CHOOSE CAMERA
- Press the MENU keya and the menu will pop up.
- Press the key until the camera choosing icon is selected by a blue box.
- Press the key to select your desired camera or cycle scan, then press the to confirm it.
- When the cycle-scan icon is selected, the auto loop scan will be between the cameras.
8.10 CONTACT
- Press the MENU key and the menu will pop up.
- Press the key until the icon is selected by a blue box. You can see our brand HelloBaby, our Email address, and our Website.
- Press the Return Key to exit.
TECHNICAL DATA
Frequency | 2410MHz-2477MHz |
---|---|
Power Adaptor | Parent Unit: Input: 100-240VAC 50/60Hz Output: 5V DC 1.2A |
Camera Unit: Input: 100-240VAC 50/60Hz Output: 5V DC 1.2A
Operating Range| Up to 1000ft (300m) outdoor (line of sight) Up to 165ft (50m)
indoor
Display| 5″ 720P TFT LCD
Battery (Parent Unit)| Li-ion 3.7V 5000mAn (7.4Wh)
Operating time| Up to 12 hours
Maximum power| <19dBm
Operation environment| Operation Temperature: +32F-+104F (0°C-40°C) Battery
Charging Temperature: +50E-+104F (10°C-40°C)
Relative Humidity: 15%-85%
TROUBLESHOOTING
No reception on the monitor| * The power adapters may not be properly connected;
- Confirm that the camera and monitor are ON;
- Camera may be far away from the monitor;
- Camera and monitor may not be properly paired; follow PAIRING instructions;
---|---
Interference or poor reception| Move the monitor close to the camera;|
The camera or monitor may be placed too close to many metal objects; Other electronic devices may be interfering with the signal; - The battery power may be too low;
Audio feedback (high pitched noise)| The camera and monitor may be placed too closed; The volume on the monitor may be set too high;
Frozen Picture on Screen| * Repower the baby unit (plug out the adapter, then plug it into the socket again); - Press the RESET key at the back of the parent unit
MAINTENANCE
- Clean your baby monitor with a slightly damp or anti-static cloth.
- Never use cleaning agents or solvents.
DISPOSAL GUIDE FOR BATTERY AND PRODUCT
- Do not attempt to repair or adjust any of the electrical or mechanical functions of the unit;
- Remember to dispose of the product in an environmentally responsible way;
- For proper collection and processing of these products, take them to the collection points designated by local authorities. You can also contact the store where you purchased the product.
Improper or incorrect use of batteries may cause corrosion or battery leakage, which could cause personal injury or damage to property. Use only the types of batteries that are indicated In this manual.
CAUTION: Risk of Fire and Burns. Do Not Open, Crush, Heat Above 45-degree
Cor Incinerate.
Follow Manufacturer’s Instructions.
– Disposal of a battery into fire or a hot over, or mechanically crushing or
cutting of a battery, that can result in an explosion;|
– Leaving a battery in an extremely high temperature surrounding environment
can result in an explosion or the leakage of flammable liquid or gas;
-A battery is subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.
– The battery shall not be exposed to excessive heat such as sunshine, fire,
or the like;
FECC & ISDE Statement
This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation/Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
This equipment complies with Canadian radiation exposure limits set forth for
an uncontrolled environment.
Radiation Exposure Statement for camera
This equipment should be installed and operated with a minimum distance of
20cm between the radiator & your body.
SAR Statement for Monitor
Specific Absorption Rate (SAR) information:
This Monitor meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluations of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. ISED RF Exposure Information and Statement the SAR limit of Canada(ISED) is 1.6 W/kg averaged over one gram of tissue. Device types: The monitor has also been tested against this SAR limit. This device was tested for typical body-worn operations with the back of the Monitor kept 0mm from the body. To maintain compliance with ISED RF exposure requirements, use accessories that maintain an 0mm separation distance between the user’s body and the back of the Monitor. The use of belt clips, holsters, and similar accessories should not contain metallic components in their assembly. The use of accessories that do not satisfy these requirements may not comply with ISED RF exposure requirements and should be avoided.
EU Declaration of Conformity (DOC)
Hereby, video times declares that the radio equipment type is in compliance
with RED Directive 2014/53/EU.
The full text of the EU declaration of conformity is available on the website:
www.hellobaby.net.cn
Model: HB6588
Responsible Party(US): Startline LLC
Add: 22 Hazelwood Drive, Jericho, NY 11753
Tel: 1-516-681-3729
Authorized UK Representative(UK): Safestore wen bnt
Add: 10 progress road Leigh on sea SS95LY UK Tel: +44(0)740 570
2799
Shenzhen Video times Technology Co., Ltd
701, Building 3, No. 1, Zhenhan Road, Gankeng Community, Jihua Street
Office, Longgang District, Shenzhen
WARNING
Strangulation Hazard: Children have STRANGLED in cords. Keep this cord out
of the reach of children (more than 3 ft (0.9 rn) away). Do not remove this
tag.
Risk Group 1
WARNING IR emitted from this product. Do not stare at the operating lamp
Product tested against EN62471
Made In China
Documents / Resources
|
HelloBaby HB6588 2.4GHz Digital Wireless Video Baby
Monitor
[pdf] User Manual
P88RX, 2AF2R-P88RX, 2AF2RP88RX, HB6588 2.4GHz Digital Wireless Video Baby
Monitor, 2.4GHz Digital Wireless Video Baby Monitor
---|---