Dongguan Tri P Electronic Technology WC20 EnterMax 20W Dual Fast Wireless Charging Pad Instructions

June 5, 2024
Dongguan Tri P Electronic Technology

Dongguan-logo

Dongguan Tri P Electronic Technology WC20 EnterMax 20W Dual Fast Wireless

Charging Pad

Dongguan-Tri-P-Electronic-Technology-WC20-EnterMax-20W-Dual-Fast-Wireless-
Charging-Pad-image

Component

Dongguan-Tri-P-Electronic-Technology-WC20-EnterMax-20W-Dual-Fast-Wireless-
Charging-Pad-fig1

  1. Charging Pad
  2. USB to C cable
  3. Instruction

Function & Part Name

Dongguan-Tri-P-Electronic-Technology-WC20-EnterMax-
20W-Dual-Fast-Wireless-Charging-Pad-fig2

  1. Wireless Charging point 1
  2. Wireless Charging point 1
  3. Display the charging state led
  4. USB-C type charging port

Product Specification

  • Input : 9V-1.57A-2.2A / 5V-2A-3A
  • Output 1: 5V/1A, 9V/1.1A (MAX 10W)
  • Output 2: 5V/1A, 9V/1.1A (MAX 10W)

Popular Compatible Models

Quick Charge Modes – 9W*2
iPhone 11, 11 Pro, 11 Pro Max, XS, XS Max, XR, iPhone X
Galaxy Note 20, Note 20 Plus, S20, S20 Ultra, Note 10, Note 10 Plus, S10, S10 Plus, S10E, Note 9 S9 S9 Plus

Feature

High-speed wireless Charging MODES: charges Samsung phones at 10W and iPhones at 7. 5W; The fastest possible wireless input that each can accept.
B
Charge 2 devices at once with dual pad’s Twin charging surfaces.
Case friendly: Don’t fumble with your phone case. Powerwave charges directly through protective cases. Rubber/plastic/TPU cases less than 5 mm thick only. Magnetic and metal attachments or cards will prevent charging.

Usage

Connect USB to C cable to charging port with USB charger.
If the LED light flashes while charging, please check to ensure that your phone case is less than 5 mm thick and has no metal attachments, expandable grips, or credit cards. Cases which contain metal, such as Pitaka, Evutec, and Spigen QNMP, will trigger foreign object detection and interrupt charging.

FCC Statement

This device complies with part 15 and part 18 of the FCC Rules. Operation is Subject To the following two conditions:

  1. This device may not cause harmful interference
  2. this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not explicitly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Note: this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 and part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and candidate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.
This device complies with Part 18 of the FCC Rules. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Increase the separation between the equipment and any other radio device.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals