MOBILE WARMING MW37V22-N Merino Bluetooth Heated Socks User Manual
- June 5, 2024
- MOBILE WARMING
Table of Contents
MOBILE WARMING MW37V22-N Merino Bluetooth Heated Socks
INTRODUCTION
Thank you for purchasing our battery-powered Premium Heated gear. Your garment
is designed to deliver heat on demand.
To ensure optimal performance of your Heated gear. Please carefully read
through this user manual prior to using the garment.
Stay up to date with the latest product information by registering your
garment at fieldsheer.com/product-registration. You can also find other great
Fieldsheer products at fieldsheer.com
The function of Bluetooth in this product is to use the Bluetooth app to
connect heating products for temperature control and wireless adjustment.
GARMENT CARE
- Disconnect the battery pack from the garment(s)
- Machine wash delicate cycle in warm water
- Tumble dry with low heat
- Do not wring
- Do not dry clean
- Do not bleach or use other harsh chemicals
- Do not Iron
BATTERY USE
Mobile Warming®’s powerful lithium-ion battery technology was designed and
engineered to provide you with safe and reliable power, allowing you to be
warm and comfortable. Please follow the instructions below to optimize your
lithium-ion battery usage.
USB CHARGING BATTERY
To charge your battery, use the supplied micro-USB cable. Connect the USB end to your computer or any USB powered source like the USB wall adaptor included with your phone or tablet.
Do not use battery if you notice a change of shape (lumps), over-heating when charging or if rust or corrosion on the battery connectors is found. Use only with the charging adaptor provided with your product to charge your battery.
BATTERY MAINTENANCE
IMPORTANT: This product is intended to be used by an adult and therefore is the sole responsibility of the Purchaser to follow detailed instructions and warnings. The Purchaser agrees to indemnify the Manufacturer for any unintended use/misuse.
- Avoid running Lithium-Ion batteries completely dead. This will result in performance problems and reduced battery life.
- Lithium-Ion batteries by nature have diminished capacity output in extremely cold temperatures. We recommend keeping batteries inside the garment to maximize battery performance.
- Do not allow Mobile Warming battery(s) to come in contact with water or liquids. If water or other liquids enter the battery interior, immediately unplug the battery from the garment.
- Do not use if you feel the battery is compromised.
- Avoid allowing your Micro-USB or DC jack ports from being contaminated with debris that could interfere with operations. Suggest to check ports before each use.
BATTERY STORAGE
- Disconnect the battery from the garment.
- Power off the battery(s) if applicable.
- Fully charged the battery(s) prior to storage
- Keep battery(s) in cool dry place out of direct sunlight
- Charge every 6 months to maintain battery life. It is important to keep your battery charged
- Do not store Mobile Warming batteries below – 4℉ (- 20 ℃)
QUICK START GUIDE
MW CONNECT™ APP
Allows you to control your Bluetooth® enabled garment with your mobile device.
This product controls the operation of the product through the APP on the
mobile phone.
- The phone downloads the connection software.
- If you are using an iPhone, search for MW connect in the appstore and download the software: After downloading the software, open the software and the dialog box “MW CONNECT ™” pops up. If you want to use Bluetooth, click the OK option in the dialog box, And then click Finish OK For Android, please download and install the installation package provided, see the attachment below. After downloading, enter the App interface and click “Allow Access to Location Services” button. In the new dialog box, click” Allow in use only “.
- Fully charge your battery to 100%.
- Open the battery pocket located on the Cuff of the Socks and plug the battery(s) into the wire harness.
- Find the cable with the DC port on the sock and plug the cable into the DC port of the battery, turn on the battery switch until the LED light is on, at which point the clothing will slowly heat up
- Enter the “MW CONNECT”App on the mobile phone, click the button in the upper left corner of the App, click ADD/WIEW
- The App automatically searches for the picture of heated wearable products. Click the picture, and the small picture of socks on the App interface will light up. At this time, it means that the Bluetooth of the App and heated wearable products has been connected, and we can control it on the App pair.
- After connection, the upper left of App interface displays the battery quantity, and the upper right displays the temperature of socks. There are four buttons at the bottom of the interface to adjust the temperature. The blue button at the far right has the lowest temperature, and the red button at the far left has the highest temperature
- To turn it off Please turn it off when you are not using it. There are two ways to shut down the battery. One is to shut down the battery by pressing the shutdown button for 2 seconds. A picture of socks that can shine in the App interface. Press 2s-5s, and a dialog box for confirming shutdown will pop up on the interface. Click OK button to shut down the socks
NOTE: Heat and time are estimated and may vary depending on conditions.
Exposing batteries to extreme temperatures may impact these estimates
.
LEGAL & WARRANTY
LIMITED ONE YEAR WARRANTY
Fieldsheer Apparel Technologies warrants to the original purchaser of this
Fieldsheer® branded product (the“Product”) that the construction, electrical
heating components and battery of the Product shall be free from factory
defect in materials and workmanship for a period one (1) year from the date of
original purchase when the Product is purchased from an authorized reseller
and used as recommended by Fieldsheer Apparel Technologies. During the
warranty period, Fieldsheer Apparel Technologies will, at its option and at no
additional charge to you, repair or replace the Product, or any part of the
Product, if it becomes defective, malfunctions, or otherwise fails to conform
with this Limited One Year Warranty.
LEGAL
Any damage caused to any Fieldsheer® products by misuse, abuse, improper care,
accident, normal wear and tear, or the natural breakdown of materials over an
extended period of time and use are not covered in this warranty. Any
alterations or repairs (attempted or otherwise) performed on any Fieldsheer®
products voids any and all warranties offered by Fieldsheer® for that
particular item.Fieldsheer®, Mobile Warming®, Stay Warm, Stay Comfortable, MW
connect™ and its related logos and images are property of Tech Gear 5.7 Inc
and/or its affiliated companies The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks
by Fieldsheer® Apparel Technologies is under license. Other trademarks and
trade names are those of their respective owners App Store® and Its logo are
registered trademarks of Apple Inc
FCC WARNING
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate
the equipment.
The device has been evaluated to meet general RF exposure requirements.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>