MOBILE WARMING MW37V036 Bluetooth Heated Socks User Manual
- June 13, 2024
- MOBILE WARMING
Table of Contents
MOBILE WARMING MW37V036 Bluetooth Heated Socks User Manual
INTRODUCTION
Thank you for purchasing our battery powered Premium Heated gear. Your garment is designed to deliver heat on demand.
To ensure optimal performance of your Heated gear. Please carefully read through this user manual prior to using the garment.
Stay up to date with the latest product information by registering your garment at fieldsheer.com/productregistration. You can also find other great Fieldsheer products at fieldsheer.com
The function of Bluetooth in this product is to use Bluetooth app to connect heating products for temperature control and wireless adjustment.
TECHNOLOGY
Proprietary Fieldsheer® powered by Mobile Warming® technology is specially
engineered for cold weather conditions. Mobile Warming®’s comprehensive
heating technology keeps you warm and comfortable in all weather conditions.
Our exclusive heating technology utilizes ultra-fine fiber elements powered by
lightweight, rechargeable, Lithium-Ion batteries. As heat builds, Mobile
Warming® technology reflects and directs heat back towards the body ensuring
that you stay warm. The combination of unique materials, construction
techniques, and innovative design results in the most advanced heated gear
available.
GARMENT CARE
Refer to your garment Premium Heated Gear label for care details
- Disconnect battery pack from the garment(s)
- Machine wash delicate cycle in warm water
- Tumble dry with low heat
- Do not wring
- Do not dry clean
- Do not bleach or use other harsh chemicals
- Do not Iron
- Recommend hanging up if storing for extended period of time
BATTERY USE
Mobile Warming®’s powerful lithium-ion battery technology was designed and engineered to provide you with safe and reliable power, allowing you to be warm and comfortable. Please follow the instructions below to optimize your lithium-ion battery usage.
USB CHARGING BATTERY
To charge your battery, use the supplied USB-C cable. Connect the USB end to
your computer or any USB powered source like the USB wall adaptor included
with your phone or tablet.
Do not use battery if you notice a change of shape (lumps), over-heating when charging or if rust or corrosion on the battery connectors is found. Use only with the charging adaptor provided with your product to charge your battery.
Never dispose of batteries in the garbage. Disposal of batteries in the garbage is unlawful under state and federal environmental laws and regulations. Always take used batteries to your local battery-recycling center. This product contains chemicals known to the state of California to cause cancer and birth defects or other reproductive harm
BATTERY MAINTENANCE
IMPORTANT: This product is intended to be used by an adult and therefore is the sole responsibility of the Purchaser to follow detailed instructions and warnings. The Purchaser agrees to indemnify Manufacturer for any unintended use/misuse.
- Avoid running Lithium-Ion batteries completely dead. This will result in performance problems and reduced battery life.
- Lithium-Ion batteries by nature have diminished capacity output in extremely cold temperatures. We recommend keeping batteries inside the garment to maximize battery performance.
- Do not allow Mobile Warming battery(s) to come in contact with water or liquids. If water or other liquids enter the battery interior, immediately unplug the battery from the garment.
- Do not use if you feel the battery is compromised.
- Avoid allowing your USB-C or DC jack ports from being contaminated with debris that could interfere with operations.
Suggest to check ports before each use.
BATTERY STORAGE
- Disconnect battery from garment.
- Power off battery(s) if applicable.
- Fully charge battery(s) prior to storage
- Keep battery(s) in cool dry place out of direct sunlight
- Charge every 6 months to maintain battery life. It is important to keep your battery charged
- Do not store Mobile Warming batteries below – 4℉ (- 20 ℃)
QUICK START GUIDE
MW CONNECT™ APP
Allows you to control your Bluetooth® enabled garment with your mobile device.
This product controls the operation of the product through the APP on the mobile phone.
-
The phone downloads the connection software.
-
If you are using an iPhone, search for MW connect in the appstore and download the software: After downloading the software, open the software and the dialog box “MW CONNECT ™” pops up. If you want to use Bluetooth, click the OK option in the dialog box, And then click Finish
2-2. For Android, please download and install the installation package provided. After downloading, enter the App interface and click “Allow Access to Location Services” button. In the new dialog box, click” Allow in use only “. -
3. Fully charge your battery to 100%.
-
Open the battery pocket located on the Cuff of the Socks and plug the battery(s) into the wire harness.
-
Find the cable with the DC port on the sock and plug the cable into the DC port of the battery, turn on the battery switch until the LED light is on, at which point the clothing will slowly heat up.
-
Available Heated Garments will appear in the app. Select connect button on screen.
-
Bluetooth Pairing – A Bluetooth pairing screen will appear. Press Continue to start Bluetooth pairing.
-
Press the Bluetooth controller button on your garment 4x times.
-
Bluetooth Pairing complete – it will show the heated garment and its current heat level when successful
-
on the MW Connect(tm) Home screen, Battery level is shown on the upper left and Heat Level is shown on the upper right. GARMENT being controlled will be shown in the middle.
To control heat level, select one of the colored buttons on the bottom of the screen. RED is 100%, Orange is 75%, Green is 50% and Blue is 25%
-
To turn off heating, there are two ways to shut off heating. One is to shut down the battery by pressing the battery button for 2 seconds. Another option is to press and hold on the sock icon in the app for 2 – 3S. Select OK from the TURN OFF GARMENT dialog box
HEAT RATINGS
NOTE: Heat and time are estimated and may vary depending on conditions. Exposing battery to extreme temperatures may impact these estimates.
Heated Socks
Power Ratings Based on Fully Charged Battery
LIMITED ONE YEAR WARRANTY
Fieldsheer Apparel Technologies warrants to the original purchaser of this
Fieldsheer® branded product (the“ Product”) that the construction, electrical
heating components and battery of the Product shall be free from factory
defect in materials and workmanship for a period one (1) year from the date of
original purchase when the Product is purchased from an authorized reseller
and used as recommended by
Fieldsheer Apparel Technologies. During the warranty period,
Fieldsheer Apparel Technologies will, at its option and at no additional
charge to you, repair or replace the Product, or any part of the Product, if
it becomes defective, malfunctions, or otherwise fails to conform with this
Limited One Year Warranty.
LEGAL
Any damage caused to any Fieldsheer® products by misuse, abuse, improper care,
accident, normal wear and tear, or the natural breakdown of materials over an
extended period of time and use are not covered in this warranty. Any
alterations or repairs (attempted or otherwise) performed on any
Fieldsheer® products voids any and all warranties offered by
Fieldsheer® for that particular item
Fieldsheer®, Mobile Warming®, Stay Warm, Stay Comfortable,
MW connect™ and its related logos and images are property of
Tech Gear 5.7 Inc and/or its affiliated companies
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc., and any use of such marks by Fieldsheer® Apparel
Technologies is under license.
Other trademarks and trade names are those of their respective owners
App Store® and Its logo are registered trademarks of Apple Inc
FCC WARNING
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC & ISDE Statement
This device complies with Part 15 of the FCC Rules and with Industry Canada
licence-exempt RSS standard(s).Operation is subject to the following two
conditions:
(1)this device may not cause harmful interference, and (2)this device must
accept any interference received, including interference that may cause
undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generates,uses and can radiate radio frequency energy and, if not installed and used in accordance withthe instructions, may cause harmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation. If this equipment doescause harmful interference to radio or television reception, which can be determined by turningthe equipment off and on, the user is encouraged to try to correct the interference by one ormore of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment
Radiation Exposure Statement for camera
This equipment should be installed and operated with minimum distance 0cm
between the radiator & your body.
CAN ICES-003 (B) / NMB-003 (B)
FOLLOW US
WWW.FIELDSHEER.COM
serial number
1 YEAR PRODUCT WARRANT
1 AN GARANTIE DU PRODUIT 1 AÑO DE GARANTÍA DEL PRODUCTO
U.S. BASED CUSTOMER SERVICE
SERVICE CLIENTÈLEE BASÉ AUX ÉTATS-UNIS SERVICIO DE ATENCIÓN AL CLIENTE
UBICADO EN ESTADOS UNIDOS
ONLINE REGISTRATION
HEATED WEARABLE PRODUCTS
BLUETOOTH HEATED SOCKS
PMN: Li-ion Battery Pack
USER MANUAL
MANUEL D’UTILISATION MANUAL DE INSTRUCCIONES
MODEL:MW37V036
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>