STAR studio XL Wireless Karaoke Speaker User Manual

STAR studio XL Wireless Karaoke Speaker

REMOTE CONTROL

1. Standby Mode On/Off
2. Select Mode (BT/FM/AUX)
3. Mute
4. Play/Pause or Channel Scan (FM Mode}
5. Previous Track or Channel Search Back (FM Mode)
6. Skip Track or Channel Search Next (FM Mode)
7. EQ adjustment
8. Volume Decrease
9. Volume Increase
10. Repeat Track
11. USB/SD Mode
12. 0-9 Preset channels saved in system (FM Mode)

Included

1. Wireless Speaker
2. Microphone
3. .Remote
4. Micro USB Cable
5. User Manual

TROUBLESHOOTING

1. No power
2. Recharge your Star Studio speaker
3. using the included micro USB cable. Try using a different cable.
4. Music is not playing  over Bluetooth®
5. Make sure your Bluetooth® device has A2DP profile.
6. Check if both devices are paired and connected over Bluetooth®.
7. Restart the speaker to reconnect your Bluetooth® device.
8. Bluetooth® device will not reconnect with the speaker
9. Navigate to your Bluetooth® settings menu on your Bluetooth® device, tap “UZ S057B” and select “Forget”
10. Now follow the steps to pair your device again.

SPECS

Speaker Specifications

1. Output Power: 6W
2. Frequency Response: 20HZ~20KHZ
3. Dimensions (WxHxD): 8.5 x 16.5 x 7 in

Additional Connection Source &

1. Audio: 3.5mm AUX cable
2. Power Source: Built-in rechargeable battery or via USB cable

Power Information

1. Input: DC5V
2. Battery Capacity: 1200mAH
3. Music playing time: Up to 4 Hours”
4. Charging time: 3 hours

Bluetooth«i Information:

• Bluetooth Version: 5.0
• Operating Distance: 30ft.
• System Requirements: Bluetooth0-capable device

Depends on individual use and may be slightly more or less than the time specified.

Technical Support

Please do not attempt to fix the product by yourself. If you are experiencing any problems with the product, please do not return it to the store you bought it from. You can contact our technical support representatives and they will assist you with any questions you might have. For assistance operating your product, please consult the User’s Manual first, then feel free to contact Merkury Innovations technical support: Merkury Innovations 45 Broadway, 3rd Floor New York, New York 10006
www.merkuryinnovations.com
[email protected]
This device complies with Part 15 of the FCC Rules. Operation is subject to the two following conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

02020 Merkury Innovations, LLC. To explore our full selection of products, visit us at: www.merkuryinnovations.com
Bluetooth® is a registered trademark of Bluetooth SIG, Inc. The illustrated product and specifications may differ slightly from those supplied. All other trademarks and trade names are those of their respective owners. Made in China

CHARGE

• Plug the micro USB cable into the micro USB port on the back of the speaker, and connect the other end of the cable with any compatible charger or wall outlet.
• When charging, the small LED indicator will glow red. When fully charged, the LED indicator will turn off.
• Charging time is approximately 3 hours.

TURN ON &OFF

• Turn the Power knob clockwise to power the speaker ON , a tone will be heard and the speaker will enter Bluetooth® mode.
• Turn knob counterclockwise fully to power OFF.

PAIR & CONNECT

• Make sure the speaker is turned off and your device’s Bluetooth8 setting is activated.
• Turn the speaker on; after a few seconds it will automatically enter into pairing mode and the LED will flash.
• On your Bluetooth® enabled device, navigate to the Bluetooth® settings menu, turn on the Bluetooth® feature, and search for new devices.
• Wait a few seconds and select “UZ S057B” The speaker will emit a tone when successfully paired.
• NOTE: If your device’s Bluetooth• version is below version 2.1, you may need to enter the password “0000.” AUX-IN: The speaker will switch to wired mode automatically once a AUX cable is
• inserted into the AUX-IN port. NOTE: Insert a USB thumb drive or Micro SD card for direct music playback.

PLAY

1. Connect your device to the speaker via Bluetooth8 (see “Pair & Connect with a New Device”).
2. Open your favorite music app and press play.
3. Control the music, track and volume from your device, or control them from the controls on the speaker.
4. Adjusting Volume : Adjust the volume using the volume knob on the speaker or through your device.
5. Press the ” Ml ” button to play/pause music.
6. Press the button to skip to the next/previous track.
7. All audio, including music, games, videos, and notifications will be routed through the speaker.

RECONNECT TO BLUETOOTH®

1. You only need to pair your Bluetooth® device with the speaker once.
2. With your previously paired device’s Bluetooth® turned on and in range, power on the speaker.
3. The speaker will automatically reconnect to the last Bluetooth® device it was connected to.
4. If you have a previously paired device that does not auto-reconnect, navigate to the Bluetooth«> settings menu on your device, turn on the Bluetooth” feature, and select “UZ S057B” from your list of paired Bluetooth• devices and select “Forget.” Repeat Pair & Connect steps stated above.

CONTROL AND PORTS (BACK OF SPEAKER)

1. POWER / VOLUME
2. LED INDICATOR LIGHT
3. DC 5V CHARGING PORT
4. AUX IN
5. MODE SELECT (BT/FM/AUX) Press & hold to turn LED on/off
6. NEXT TRACK
7. PLAY/PAUSE Long press for TWS connection3
8. PREVIOUS TRACK
9.  DIGITAL DISPLAY
10. Micro SD PORT Speaker will switch to micro SD card mode when a micro card is detected. use PORT Speaker will switch to USB mode when a USB drive is detected.
11. ECHO VOLUME
12. MIC. VOLUME
13. MICROPHONE PORT
    To use a microphone, insert the microphone jack into the microphone port, the speaker will automatically adjust to microphone mode.

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for  compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmfül interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>