BINNIFA Play6 Wireless USB PC Sound Bar BT Table Long User Manual

June 5, 2024
BINNIFA

BINNIFA Play6 Wireless USB PC Sound Bar BT Table Long

Packing List

BINNIFA-Play6-Wireless-USB-PC-Sound-Bar-BT-Table-Long-
FIG1

Product Specifications

Size L820W81H60mm
Speaker unit Runway-type full-range: 45 66mm 4
Power 30W
Frequency Range 60Hz-18KHz
Degree of separation 45dB
Signal-to-noise ratio 75dB
Interface BT、COX 、OPT、AUX、ARC、USB、SUB OUT
Adapter input power DC15V/1.6A
Gross weight 2.3kg

Function Description

Audio input (back panel area)

BINNIFA-Play6-Wireless-USB-PC-Sound-Bar-BT-Table-Long-
FIG2

  1. Power interface : Connect the power adapter
  2. AUX input port: Connect 1 to 2 audio cables, connect with the red/white the output port of the audio source device
  3. USB input port: After inserting the U disk, it will automatically recognize and play
  4. ARC input port: Connect to a TV with HDMI ARC function
  5. OPT input port: connect to the optical cable, and connect to the optical output port of the audio source device
  6. COX input port: connect to the coaxial cable and connect to the coaxial output port of the audio source device

Speaker button operationBINNIFA-Play6-Wireless-USB-PC-Sound-Bar-BT-
Table-Long-FIG3

  1. Volume adjustment/up and down song switching: Short press +/- for volume adjustment, long press +/- for up and down song switching.
  2. Power switch: Long press for 3 seconds to turn on/off the speaker.
  3. Audio source selection: Short press the function key to switch the audio source mode, the indicator on the right side of the speaker lights up to show the current audio source mode.

Remote control operation

  1. Audio source selection button: the indicator light on the right side of the speaker lights up to show the corresponding status.
  2. Sound effect mode:
    • MUS: Music mode
    • NEWS: News mode
    • MOV: Movie mode

Automatic Standby
In order to save electricity and protect the service life of the product, the speaker will automatically stand by when there is no audio input for 15 minutes, and restart after standby to resume the working state before standby.

Bluetooth Wireless Connection

  1. Switch the speaker to Bluetooth mode;
  2. Search for the Bluetooth signal “BINNIFA Play6D” in mobile phones, computers, TVs and other Bluetooth-enabled devices, and click Connect. After the connection is successful, The indicator light turns into a steady blue light, and the speaker emits a “dingdong” prompt;

Precautions for Bluetooth connection:

  1. Password is required: the password of this machine is “0000”;
  2. If you can’t search or connect, please power off the machine, restart it after 5 seconds, and reconnect;
  3. When Bluetooth fails to connect, please check whether other devices have been connected;
  4. The Bluetooth connection range of this machine is 5-8 meters;
  5. Bluetooth is susceptible to electromagnetic interference from air purifiers, WIFI routers, induction cookers and other equipment;
  6. When there are too many Bluetooth connections in the phone (or Pad), please clear the original Bluetooth connection, restart the phone and reconnect.

FCC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals