BINNIFA PLAY1D Computer Speaker User Manual
- June 5, 2024
- BINNIFA
Table of Contents
BINNIFA PLAY1D Computer Speaker User Manual
Packing List
Specification
Function Description
a. Function display (front)
b. Interface (back)
Operating Instructions
a. Turn on
Take out the USB power cord from the package accessories, plug it into the DC
5V jack on the back of the speaker, and then plug the USB interface end in a
5V USB charger (the charger can be used with mobile phone chargers, etc.), or
a computer’s USB port, speakers will starts automatically.
b. Wired/wireless mode switching:
(1) It default Bluetooth mode when starting up (voice prompt: Bluetooth mode);
(2) When the AUX audio cable is inserted, it will automatically switch to AUX
mode (voice prompt: AUX mode); unplug the AUX audio cable, automatically
switch to Bluetooth mode.
c. Bluetooth wireless connection:
(1) After turning on the speaker, making sure that the AUX audio cable is not
plugged in, and search for “BINNIFA Play1D” on your Bluetooth device, then
pair to the speaker. You can use Bluetooth to play music when successfully
connected;
(2) In the Bluetooth mode, If you want to connect to another device, you need
to disconnect the previously connected one, and then use another device to
repeat the previous Bluetooth connection steps.
d. AUX in wired connection:
(1) Take out the 3.5mm AUX audio cable, plug one end into the AUX interface on
the back of the speaker (voice prompt: AUX mode), and connect the other end to
the audio source device to play music;
(2) When you need to switch from AUX wired to Bluetooth wireless mode, please
unplug AUX wired and the product will automatically switch to Bluetooth
wireless mode.
e. 3.5mm MIC interface: In BT mode, insert the 3.5mm connector microphone into
the MIC input port on the back to enter the microphone call.
f. Play operation of external earphone: In any mode, plug the earphone into
the earphone output port on the back, you can enter the earphone to listen to
music through the speaker.
Note:
- Short press the “PAIR” button on the back interface once to turn off/on the knob light;
- Please charge the speaker with a 5V 2A charger, so as to avoid insufficient power supply, broken sound, or other noise;
- It is strongly recommended to choose a high-quality 3.5mm connector microphone to avoid howling during using MIC interface;
- When using a computer USB port for power supply, due to insufficient power supply for some computer USB ports, slight distortion or sound interruption may occur during playback at maximum volume. At this time, please adjust the volume or change the power supply method;
- The speaker supports Win7 and above systems, Mac systems.
After-sales Services and Warranty
- 30-Day Return of Any Reason. You may return your undamaged product and packaging within 30 days, please return the unit in its original carton.
- 12-Month Warranty for Quality-Related Issues. If it is not quality related, the customer must pay the return shipping costs and repair costs.
- In the following circumstances, we will not be able to provide you with free services:
(1) Exceeding the warranty period;
(2) All damage caused by human factors, including damage caused by improper use or storage, such as liquid entry, external force squeezing, and falling damage etc.;
(3) Damage caused by unauthorized disassembly or repair;
(4) Damage caused by other force majeure factors. (such as floods, fires, etc.)
The Toxic and Hazardous Substances or Elements
This form was prepared in accordance with the provisions of SJ/T 11364
O: Indicates that the content of the hazardous substance in all homogeneous
materials of the part is below the limit requirement specified in accordance
with the GB/T 26572.
X: Indicates that the content of the hazardous substance in all homogeneous
materials of the part is exceeding the limit requirement specified in
accordance with the GB/I 26572. There is no mature alternative solution that
meets the requirements of RoHS.
The numbers in this mark indicate that the environmental protection use period of the product under normal use is 10 years. Some components may also have an environmental protection use period indication, and the environmental protection use period is subject to the figures in the indication. Due to different product models, the product may not include all the above parts except the host, please refer to the product packaging.
Only suitable for areas below altitude of 2 000 m.
Only for use in non-tropical climates
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct thein terference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>