CYD Electronics CYD-BH01 True Wireless Earbuds Instruction Manual
- June 5, 2024
- CYD Electronics
Table of Contents
CYD Electronics CYD-BH01 True Wireless Earbuds
how to use
Product Appearance
POWER ON/OFF
- Take out the earbuds and it will start up automatically/Press the touch control señsor for 5 seconds to power on. Prompt tone: Power on
- Put the earbuds into the charging case and it will automatically power off/Press the touch control sensor for 5 seconds to power off. Prompt tone: Power off
The headphone will automatically power off after 5 minutes of ständby time without conñécting to any device
Pairing/Reset
Headset and device pairing After taking out the earbuds, the left and the right earbuds will automatically pair. The red and blue light flash alternately waiting for pairing with your phone. Turn on your device and search for ” Amaitree-T click”Connect, then it rings the prompt tone” Connected
- Pair One Earbud At first, take the earbud out of the charging case. After the earbud automatically powers on, turn on your device, search for “Amaitree-T1” and click “Connect” If successful, there comes the prompt tone “Connected”
- Automatic Connection After the first connection, the earbuds can be automatically reconnected to the previous pairing device with the prompt tone: Connected.
- Automatic Disconnection the earbuds are disconnected from the device or out reconnected of the connection range, the device will within 3 minutes. If
- Factory Default Setting Reset When the earphone is placed in the charging case the prompt time tone: ends, Disconnected. power off with the double-click earphone the taken R/L out, the light flashes time. and clear the pairing devices list. Restart the earbuds and the factory settings are restored successfully.
Functional Operations
Charging
-
When case is charging
Indicator lights on the charging case keep flashing.
One indicator light corresponds to 25% charged. When fully charged, four white indicator lights will keep on. -
When earbuds are charging
The red light of the earbuds indicator keeps on. If turned off, the earbuds are fuluy charged.- When the charging case and the earbuds are charged at the same time, the lights will be on at the same time.
- When the headphone is in low battery, the red light flashes twice quickly, and the prompt tone indicates “Battery Low
Frequently Asked Questions
- After the earbuds power on, if the reconnection fails, it will automatically enter into the state of waiting for pairing. The red and blue lights will flash alternately.
- When the earbuds are disconnected or out of valid pairing range, it will automatically enter into the state of waiting for pairing, and the red and blue lights will flash alternately.
- If the earbuds cannot be turned on, please make sure the earbuds have power. If the earbuds on thave enough power, please charge it for more than 15 minutes before turning it on.
- When the connection has an intermittent connection.
- Please try to shorten the distance between the device and the earbuds. Avoid physical obstacles in between.
- Please stay away from the strong interference source. (WIFI /GPRS and etc)
- Please ensure Bluetooth is not blocked.
- After the earbuds are connected to the device, the phone/video/audio function cannot be used.Once the earbuds are connected to the device successfully, click the icon on the right of device name. Make sure that the “Media Audio” option has been turned on.
Attention
- Do not disassemble, repair, or modify the product for any reason, or it may cause fire or even complete damage to the product;
- Do not place the equipment in an environment where the temperature is too low or too high (below OCor above 45″ C);
- Do not wipe the product with alcohol and other volatile liquids;
- Please avoid contact with liquid;
- For children, please use it under the supervision of parents.
List of Accessories
Product Parameters
FCC Rules
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential instalation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>