LuxFond Smart RGBIC Outdoor String Light User Guide
- June 16, 2024
- LuxFond
Table of Contents
Quick Start Guide
Smart RGBIC LED Outdoor Lights EASY INSTALLATION
Install string lights under the eaves to create a wall-washing lighting effect.
Installation Steps
-
Please connect the string lights and plug in the power supply before installation to ensure that the string lights work properly.
If you plug in the power first and then connect the string lights, the lights may not light up. -
Prepare a ladder and ensure it is stable enough or use it with the help of another person. Do not install lights on rainy or hot days to avoid slipping due to high temperatures or ladders.
-
Determine the position of the first string of lights. Make sure that the adapter and control box are long enough to connect to the power supply. Fix the adapter to the wall to reduce the burden on the string lights.
Installation details
- Clean the surface with a cloth or tissue before installing the string lights.
- Please install the string lights 5-10cm(2-4inch) away from the wall surace.
- Tear off the VHB qum on the back of the light.
- Press the light firmly against the surface for more than 5 seconds.
- Attach 4 screw clips to each string light to keep them secure. The joint between the first string light and the control box, and the power cords at the top of the gable needs to be secured with an extra clip.
- Connect 2 string lights via the waternroof connectors and screw in the cap.
- Firmly ecrew the waternroof connector cap of the last string light section.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>