Bort BDR-2300-R Steam Cleaner User Manual
- June 5, 2024
- Bort
Table of Contents
Bort BDR-2300-R Steam Cleaner
OVERVIEW
FUNCTION
No
.
| Name| Function
---|---|---
1| Soft pipe| Deliver the steam from unit
2| Unit| Produce the steam and storage
3| Steam gun| Control the steam on/off.
4| Handle| Move by hand
5| Led light| Display the steam states.
6| Cover| To fill water and store small
accessories
7| Safety
valve
| Fill water & relief the overpressure
8| Wheel| Easy for moving
9| Power
switch
| Control the electric power
10| Power plug| Connect with a socket to get electricity
Fill water
Please kindly use the measuring cup to fill the water before using it. Max water can be filled at 1.5L.
Remark please make sure that no residual water in the water tank after using every time. Waiting for 60mins after power off. Use one coin to Unscrew the safety valve counterclockwise at the bottom of the unit. (for BDR-2500RR only) If any steam is released during unscrew, please stop for a while until no steam. Then turn the machine and poured out of the water in the boiler. The residual water in the boiler may still be remaining hot, please pay attention to prevent any burn. Do not inject any liquid except clean water
Power on
Put the plug into the socket and open the power switch. If the power is on, the red light will on.
Do not use a wet hand to touch the power Do not use any power cord, or power socket in broken status.
Operation
If a green light show on at the first time means steam is ready. Hold on to the steam gun by hand and move the steam trigger ahead. Steam will come out directly. If you need automatic steam without hand, just turn the steam lock to the right side when in use. There will be some water in the steam first. Do not use to clean carpets, iron clothes etc. Suggest you can spray to some container. It will be normal after 2-3seconds Here is a steam adjustable button in the gun. Please kindly adjust the steam amount accordingly to the actual situation. For a long time of use, you can turn the steam lock to the right side and then steam come out without hand touch. For stopping, just turn the steam lock to the left side.Any temporary leave ( get a call), please stop the steam and turn the steam lock to the right side, and then you can not trigger the steam anymore. Please choose the appropriate accessories according to the actual situation. Detailed please refer to the accessories instructions.If the user left for a long time, please shut off the power. Red light show on it means short of water. The green light will be on and off during usage, it will not influence any use when the green light is off.
Adding water to the tank during operation
Unplug the appliance by unplugging the plug from the outlet.
Caution: Before removing the safety cover, press the steam button, to relieve residual pressure! Slowly turn the safety cover, but do not remove it, residual steam will Gradually go out until it all comes out. Then place the appliance in a cool place and let it cool down for three minutes. Only then, completely unscrew the lid. Using a measuring cup, pour the required amount of cold or hot water. Firmly tighten the safety cover on the device. If you want to continue use, just add water in the tank directly (for BDR-2500RR only)
Storage & Cleaning
After use, please turn the power off. If the steam has not been fully released, please keep your thumb on the steam button until no steam can be released. If there is dirt on the surface of body, please use dry dishcloth with some water to wipe gently.
Do not use water to spray the machine. Don’t place it under dampness which may cause a short circuit. You can install the cord rewinder on the back of unit and assemble the power cord on it.
You can install the cord rewinder on the back of the unit and assemble the power cord on it.
WARRANTY
-
BORT GLOBAL LIMITED offers a 2-year warranty from the date of sale for all its products. Professional and commercial tools are not covered by the warranty. Repair is only available for a fee in this case.
-
Non-commercial use of the tools imposes limitations on the duration of its operation and restricts the intended usage to household purposes only. The continuous operating time should not exceed 40 hours. In addition, 10-15 minute breaks are to be made after every 15 minutes of continuous operation. Ignoring this condition when using the tools is a violation of the good operating practice (this provision does not apply to pumps, generators, chargers and similar equip-ment). Subject to the above-mentioned condition, the service life of the tools is 5 years. When you purchase a tool, a warranty card is issued (fields with a date of sale, model, and serial number are mandatory, other fields can also be completed). Please keep the card together with the sales receipt during the entire warranty period for presentation at the service center. Electric tools are only accepted for warranty repairs when assembled with all removable devices and their fastening elements (bus bars, saw blades, chains, knives, trimmer heads, injectors, sprockets, bolts, nuts, and mounting flanges) in working condition.
-
The warranty period is extended up to 3-5 years*, provided the owner registers the electric power tool within 2 weeks after the purchase date. The extended warranty does not cover rechargeable tools, battery chargers, and supplied accessories. Registration is only possible online at www.sbm-group.com. Please print the registration certificate at the time of registration. The certificate is the only confirmation of the fact of registration. The registration certificate should be presented at the service center together with the warranty card and sales receipt.
-
The following malfunctions are eliminated free of charge during the warranty period:
-
Damage to the instrument, caused by the use of low-quality materials
-
Assembly defects due to the fault of the manufacturer.
-
The warranty does not cover:
-
Malfunctions of the tools are caused by the failure to comply with the operating instructions.
-
Mechanical damage (cracks, chips, mechanical damage to power cords, mechanical damage to the enclosure, etc.), damage caused by exposure to aggressive environments and high temperatures, damage induced by the ingress of liquids or foreign matter into ventilation grids of the electric tools, as well as damage due to improper storage (corrosion of metal parts, etc.).
-
Tools with defects that were caused by an overload (simultaneous failure of the rotor and stator), improper use (usage of blunt, unsuitable, unbalanced, or improperly chosen replace-ment devices), lack of maintenance or care, and use of the tools for purposes other than the intended purpose (for example, for processing of materials for which the tool is not intended, etc.), as well as by the instability of electric power supply, exceeding the standards set by EN 61000-3-2, EN 61000-3-3. Among others, undeniable signs of an overload include changes in appearance, deformation or melting of parts and components of the product, and darkening or charring of wire insulation under high temperatures.
-
Wear parts and materials (carbon brushes, belts, rubber gaskets, seals, guards, platforms, bus bars, gears, bearings, hubs, coil heaters, pulleys, rollers, rods, lock buttons, etc.), components (gears, shafts, bearings, rods, rollers, etc.) subject to deterioration due to lubrication wear-out, as well as replacement devices (drill chucks, SDS cartridges, platforms, collets, bus bars, flexible shafts, batteries, battery chargers, etc.) and supplies (knives, saws, abrasives, saw blades, drill bits, drills, lubrication, etc.), except in cases of mechanical damage of the above-mentioned products due to failures of the electric tool which are covered by this warranty.
-
Natural wear of the tool, its parts, and components (wearing out of the resource, severe internal or external contamination, wear-ing out of the lubrication).
-
Tools that were unsealed or repaired during the warranty period by persons or organizations who are not legally authorized to perform these activities.
-
Tools with removed, erased, worn out or changed serial numbers, including cases when the data of the electric tool does not match the data of the warranty card.
-
Preventive maintenance of the electric tools, for example, cleaning, washing, and lubrication.
-
Do not operate electric tools exhibiting failure symptoms (high arcing, smell of burning, increased noise, severe vibration, uneven rotation, loss of power). Do not use the electric tools if there is any mechanical damage to the power cord (cracks, chips, tears, binds), AC plug, or the enclosure of the tool.
-
During the warranty period, faulty parts and components of the instrument are repaired or replaced free of charge. The Service Center reserves the right to decide whether such parts and components are to be replaced or repaired.
If a failure or malfunction is recognized by BORT GLOBAL LIMITED as a warranty case, then it can be removed according to our own choice by repair or replacement of the defective tool. Replaced tools and parts become the property of the Service Centre of BORT GLOBAL LIMITED. -
Guidelines for the preventive maintenance of electric tools: Regular preventive maintenance (cleaning, washing, relubrication of bearings and gearbox, replacement of fast-wearing parts) is recommended for the tools. Maintenance ensures the perfect operation of the electric tool during its entire service life cycle. The frequency of preventive maintenance at rated load is determined according to the natural wear of carbon brushes. Maintenance work is charged according to the price list of the service center. Any failures covered by the warranty and detected in the course of maintenance are repaired free of charge. Warranted failures, which are detected by the diagnostics, are eliminated as agreed by the parties according to the routine procedure.
Preventive maintenance does not extend the duration of the warranty period.
Other claims, except for the above-mentioned right for free remedial measures, are not covered by this warranty. -
This warranty does not affect other legal consumer rights granted by the applicable laws.
References
- Bort Global - power tools and cleaning
- Bort Global - power tools and cleaning
- Интернет-магазин Extego. Продажа электроинструментов, бытовой техники, товаров для сада и дачи по Москве и РФ
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>