Bort BVC-95 Car Vacuum Cleaner User Manual

Bort BVC-95 Car Vacuum Cleaner

INSTALLATION INSTRUCTIONS

TECHNICAL SPECIFICATIONS

SAFETY INSTRUCTIONS

• Do not operate this appliance in explosive atmos-pheres, in the presence of fl ammable liquids, gases or dust.
• Do not abuse the cord. Never use the cord for carry-ing, pulling or unplugging the appliance. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
• Be sure the appliance is switched off when plugging in.
• In case of electrical or mechanical malfunction, im-mediately switch off the appliance and unplug it.

For proper functioning of the appliance regularly empty and clean dust box and textile fi lter!

MAINTENANCE

Make sure that the machine is not live when carrying out maintenance work on the motor.

• Regularly clean the machine housing with a soft cloth, preferably after each use.
• Keep the ventilation slots free from dust and dirt.
• If the dirt does not come off use a soft cloth moistened with soapy water.
• Never use solvents such as petrol, alcohol, ammonia water, etc.
• These solvents may damage the plastic parts. Should a fault occur, e.g. after wear of a part, please contact your local SBM Group dealer.

Warranty terms

1. BORT GLOBAL LIMITED off ers the 1-year warranty from the date of sale for all its products. Professional and commercial tools are not covered by the warranty. Repair is only available for a fee in this case.

2. Non-commercial use of the tools imposes limitations on the dura-tion of its operation and restricts the intended usage to household purposes only. The continuous operating time should not exceed 40 hours. In addition, 10-15 minute breaks are to be made after every 15 minutes of continuous operation. Ignoring this condition when using the tools is a violation of the good operating practice (this provision does not apply to pumps, generators, chargers and similar equip-ment). Subject to the above mentioned condition, the service life of the tools is 5 years.
   When you purchase a tool, a warranty card is issued (fi elds with a date of sale, model, and serial number are mandatory, other fi elds can also be completed). Please keep the card together with the sales receipt during the entire warranty period for presentation at the ser-vice centre.
   Electric tools are only accepted for warranty repairs when assembled with all removable devices and their fastening elements (bus bars, saw blades, chains, knives, trimmer heads, injectors, sprockets, bolts, nuts, and mounting fl anges) in working condition.

3. The warranty period is extended up to 3-5 years*, provided the owner registers the electric power tool within 2 weeks after the purchase date. The extended warranty does not cover rechargeable tools, battery chargers, and supplied accessories. Registration is only possible online at www.sbm-group.com. Please print the registration certifi cate at the time of registration. The certifi cate is the only confi r-mation of the fact of registration. The registration certifi cate should be presented at the service centre together with the warranty card and sales receipt.

4.  The following malfunctions are eliminated free of charge during the warranty period:

   • Damage to the instrument, caused by the use of low-quality ma-terials
   • Assembly defects due to the fault of the manufacturer.

5.  The warranty does not cover:

   • Malfunctions of the tools caused by the failure to comply with the operating instructions.
   • Mechanical damage (cracks, chips, mechanical damage to power cords, mechanical damage to the enclosure, etc.), damage caused by exposure to aggressive environments and high temperatures, damage induced by the ingress of liquids or foreign matter into ventilation grids of the electric tools, as well as damage due to improper storage (corrosion of metal parts, etc.).
   • Tools with defects which were caused by an overload (simul-taneous failure of the rotor and stator), improper use (usage of blunt, unsuitable, unbalanced, or improperly chosen replace-ment devices), lack of maintenance or care, and use of the tools for purposes other than the intended purpose (for example, for processing of materials for which the tool is not intended, etc.), as well as by the instability of electric power supply, exceeding the standards set by EN 61000-3-2, EN 61000-3-3. Among others, undeniable signs of an overload include: changes in appearance, deformation or melting of parts and components of the product, darkening or charring of wire insulation under high tempera-tures.
   • Wear parts and materials (carbon brushes, belts, rubber gaskets, seals, guards, platforms, bus bars, gears, bearings, hubs, coil heat-ers, pulleys, rollers, rods, lock buttons, etc.), components (gears, shafts, bearings, rods, rollers, etc.) subject to deterioration due to lubrication wear-out, as well as replacement devices (drill chucks, SDS cartridges, platforms, collets, bus bars, fl exible shafts, batter-ies, battery chargers, etc.) and supplies (knives, saws, abrasives, saw blades, drill bits, drills, lubrication, etc.), except in cases of mechanical damage of the above mentioned products due to failures of the electric tool which are covered by this warranty.
   • Natural wear of the tool, its parts and components (wearing out of the resource, severe internal or external contamination, wear-ing out of the lubrication).
   • Tools that were unsealed or repaired during the warranty period by persons or organizations who are not legally authorized to perform these activities.
   • Tools with removed, erased, worn out or changed serial numbers, including cases when the data of the electric tool does not match the data of the warranty card.
   • Preventive maintenance of the electric tools, for example, clean-ing, washing, lubrication.

6. Do not operate electric tools exhibiting failure symptoms (high arcing, smell of burning, increased noise, severe vibration, uneven rotation, loss of power). Do not use the electric tools if there is any mechanical damage to the power cord (cracks, chips, tears, binds), AC plug, or the enclosure of the tool.

7. During the warranty period, faulty parts and components of the instrument are repaired or replaced free of charge. The Service Cen-tre reserves the right to decide whether such parts and components are to be replaced or repaired. If a failure or malfunction is recognized by BORT GLOBAL LIMITED as a warranty case, then it can be removed according to our own choice by repair or replacement of the defective tool. Replaced tools and parts become the property of the Service Centre of BORT GLOBAL LIMITED.

8. Guidelines for the preventive maintenance of electric tools: Regular preventive maintenance (cleaning, washing, relubrication of bearings and gearbox, replacement of fast wearing parts) is rec-ommended for the tools. Maintenance ensures perfect operation of the electric tool during its entire service life cycle. The frequency of preventive maintenance at rated load is determined according to the natural wear of carbon brushes. Maintenance work is charged according to the price list of the service centre. Any failures covered by the warranty and detected in the course of maintenance are re-paired free of charge. Warranted failures, which are detected by the diagnostics, are eliminated as agreed by the parties according to the routine procedure. Preventive maintenance does not extend the duration of the war-ranty period. Other claims, except for the above mentioned right for free remedial measures, are not covered by this warranty.

9.  This warranty does not aff ect other legal consumer rights granted by the applicable laws.

Depending on the model.

GUARANTEE CERTIFICATE

• CERTIFICATE
• Stamp dealer
• Terms and Conditions of the extended warranty online at www.bort-global.com
• Article
• Model
• Serial Number
• Date of purchase
• Salesman
• After having read the warranty terms and pre-purchase inspection I certify that I’ve got no complaints in respect of the appearance and performance of the tool.
• Signature

Subject to change
BORT GLOBAL LIMITED
Room 1501, 15/F., SPA Centre, 53-55 Lockhart Road, WANCHAI HONG KONG
Made in China

References

• Bort Global - power tools and cleaning
• Интернет-магазин Extego. Продажа электроинструментов, бытовой техники, товаров для сада и дачи по Москве и РФ

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>