Syvio Technology OL3100160 Bluetooth Speaker User Manual
- June 5, 2024
- Syvio Technology
Table of Contents
Bluetooth Speaker manual
| Shell material | 50% translucent |
|---|---|
| Shell technical requirements | The glossy |
| Open mold way | Reopen the base mold |
| Memory function | Memory function |
| Control input voltage | 100–‘240V power connector, 5V 1ADC output? ; |
| Connection mode | Type-c direct connection, without adapter |
The lights
change
Switch button| RGB atmosphere lamp
1. Mode: Gradient mode, light color conversion
2. The power-on light is the brightest
Function indicator light:
3. Red light, green light, no operation button indicator light will be off
after 10 seconds
4. Light and speaker switch on and off independently
5. The startup indicator blinks and turns off the indicator after the
connection is successful
6. It is bright when charging, not bright when not charging, and not bright
when fully charged
Energy saving| If Bluetooth is not connected after being powered on for a
period of time, the device automatically shuts down
flip| Speaker flip, lights, and speakers automatically turn on and continue to
play when the last shutdown
Sleep patterns| Built-in natural sound, white noise, pink noise
Switch on the sound| Shut down
Sound switch button| Sound switch selected sound indicator (refer to existing
design)
Sound level/pause| Adjust the volume, play/pause
Timer| Timing button: 15m / 30m / 60m/continuous Standby time:
The power| It depends on the actual situation
consumption of the work|
---|---
Speaker specification| 3W 4 w speaker,
The battery type| Li-ionBattery1,30403.7V/600mAhTentative
LED adapter type| 5V 1A
Net weight| 200g
Product size| Top diameter 62mm height 95mm bottom diameter 75mm
Packing size| 8585%110mm
Operating temperature I:| – 20 ‘C and 40 t
Operating humidity R.11| 10% – 90%.
UGR| No request
PP| 7r:=0.5 (adapter required)
IP Grade| 20
Charging indicator light| On the charging base, the red color indicates that
it is charging, and the light will not turn off after it is fully charged
flash| Used for storing sleep music
Charging time| Hopefully, about 3 hours
Discharge time| Fit time 20H (IOU) 5H (100Lm) includes playing music
note| The final sample is final
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.