Shenzhen Tengsai Technology X11 Car Wireless Charger and Car Holder User Manual
- June 5, 2024
- Shenzhen Tengsai Technology
Table of Contents
**Shenzhen Tengsai Technology X11 Car Wireless Charger and Car Holder User Manual
**
PRODUCT INTRODUCTION
This smart car wireless charging stand is an intelligent product with a Simple design, Safe, support Qi standard, Compatible with all wireless charging mobile phones that support qi standard protocol . No need to plug in the data cable when charging the phone, which provides you with a convenient and safe charging environment.
PRODUCT OVERVIEW
Remark: All data of this product came from laboratory tests, may have a little bit errors in actual using.
Operating Guide
-
Get the air vent clip from the package
-
After get the air vent clip from the package, align the position of the mounting nut and rotate the nut to clamp the air vent clip
-
The product will automatically adjust the extendable foot according to the size of the mobile phone, and automatically calibrate the position of the wireless charging coil.
-
After installed wireless charger with air vent, place it on related position in the car, connecting USB cable At this time, the LED light status is colorful cycle breathing (standby)
-
Two clips will automatically open an grip your mobile phone when you place mobile phone close to wireless charger holder with 100MM, At this time, the LED light status is blue (charging).
Notice: When you need to take the phone out, just touch the sensor button on the back then the clips will open automatically, and take it out.
- When wireless charger is in abnormal working state,(detects other objects or dyes function status of the LED light is flashing red
Parameters
15W
- Input：5V/2A；9V/1.67A
- Output power：15W/10W /7.5W /5W
- Charging distance：≤8mm
- Charging efficiency：≥76％
- Operation Frequency： 110kHz-205KHz
Wireless Charge Compatible Devices
HUAWEI:P30 Pro, Mate 20Pro,
IPHONE: iPhone 8, iPhone 8 Plus, iPhone X, iPhone XR, iPhon iPhone XS
MAX,
SAMSUNG: Note9, S9, S9+, Note8, S8, S8+, S7Edge, S7, Note5, S6, Note6,
Note7, S6Edge, S6Edge+, S6G9209, SM-W2019, SM-W2017, SM-W2018,
NOKIA Lumia:930, 830, 1520, 1020, 820, 720, 920, 925,
GOOGLE Nexus:4/5/6/7 XIAOMI: MIX2S
Note: Compatible with all models that support the Qi standard(the above is a common part).
Package Includes
- 1 X Smart Wireless Car Charger Holder
- 1 X Air Vent Mount
- 1 X USB Cable
- 1 X Instruction Manual
Precautions
- Support all devices enable Qi standard;
- If need fast charging, please use QC2.0 or above adaptor;
- AII phone cases of magnetic, metal or ring holder are not supported;
- Please keep the product away from water or other liquid;
- If need to clean it, please power off it before doing.
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter. During the operation of
device a distance of 15 cm surrounding the device and 20 cm above the top
surface of the device must be respected.