Sudio Ab SUDIOA2 Wireless Earbuds Owner’s Manual
- June 5, 2024
- Sudio Ab
Table of Contents
Sudio Ab SUDIOA2 Wireless Earbuds
Package Contents
- A2
- Charging cable
- Eartip holder
- Warnings
- Owners manual
Removal
- Remove stickers
- Place earbuds in case
- Remove from case and connect device
Functions
-
1 tap
-
Tap 2x left
-
Tap 2x right
-
Tap 3x right
-
Tap 3x left
-
Turn ANC on/off
-
Hold any side 2 sec
-
Accept calls: 1 tap
-
Hang up or reject calls: Hold button 2 seconds
How To Charge
- Charge with USB-C.
- Amber/white light = charging.
- White light = charged.
- LED blinks amber light when
- low battery (0-25%), and white
- light between 26%-100%
How To On Off
- Place earphones in charging
- case to turn off.
- Remove from case to turn on
Specifications
- Product name: Sudio A2
- Product model: Sudio A2
- The input current of the earphone: 55m
- Input voltage: 5.0V
- Input current of charging box: 500mA
- Input voltage: 5.0V
- The output current of the charging box: 160mA
- The output voltage of the charging box: 5V
- Built-in lithium battery Voltage and capacity Headset battery: 3.7V, 55mAh
- Charging box battery: 3.7V, 400 mAh
- Bluetooth Version: V5.2 ;BDR+EDR;
- Max. Transmit Power:-6.20dbm
- Antenna gain:-1.9dbi
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.