BAJAJ GX 3501 500 Watts Mixer Grinder User Manual

June 5, 2024
BAJAJ

Mixer Grinder
Use & Care  Manual

Dear Consumer, Thank you 1 For choosing the natal Mixer Grinder of which You are now the proud owner. please read and follow all the instructions given in this use and care manual carefully, prior to using your Bajaj Mixer Grinder, to get the best mileage and trouble-free operation. Bajaj Electricals Limited

TECHNICAL SPECIFICATIONS :

Model| GX 400GX (4 7/ Jars)
GX 3000(3 Jars)| GX 8| GoodRx| 0X21| REX (2 Jars)
,
REX (3 3a19| 11411STER 0 Jers)
&WU (3 Jars)
MISTER (4Jas)| Tweten Min| GX 35°1/
OX 3701
---|---|---|---|---|---|---|---|---
Electric Supply| 230V
50Hz AC Single Phase| 230V
50Hz AC Single Phase| 230V
50Hz AC Single Phase| 230V
50Hz AC Single Phase| 230V
50Hz AC Single Phase| 230V
50Hz AC Single Phase| 230V
50Hz AC Single Phase| 230V
50Hz AC Single Phase
Motor Power| 500 /750 W| 500 1750 W| 600 W| 550 W| 500 W| 750 W| 750 W| 500 W/750 W
Operating Cycle| 30 min.
(5min. ON,
2min. OFF)| 30 min.
(5min. ON,
2min. OFF)| 30 min.
(5mln. ON,
2min. OFF)| 30 min.
(5min. ON,
2min. OFF)| 30 min.
(5min. ON,
2min. OFF)| 30 min.
(5mln. ON,
2min. OFF)| 30 min.
(5mln. ON,
2min. OFF)| 30 min.
(5mln. ON,
2min. OFF)
Motor Type| Universal| Universal| Universal| Universal| Universal| Universal| Universal| Universal
Speed Control Switch| Rotary type| Rotary type| Rotary type| Rotary type| Rotary type| Rotary type| Rotary type| Rotary type
Protection Class| / Class I| / Class I| Class I| | | Class I| Class I| /Class I
Incher| For
momentary
operation| For
momentary
operation| For
momentary
operation| For
momentary
operation| For
momentary
operation| For
momentary
operation| For
momentary
operation| For
momentary
operation
Speed (No Load)| 20,000 R.P.M. approx| 20,000 R.P.M. approx| 20,000 R.P.M. approx| 20,000 R.P.M. approx| 20,000 R.P.M. approx| 20,000 R.P.M. approx| 20,000 R.P.M. approx| 20,000 R.P.M. approx
Overload Protection| Resetting type OLP 250V 50Hz, 2213.2 Amps| Resetting type OLP 250V 50Hz, 2213.2 Amps| Resetting
type OLP
250V 50Hz, 2.6 Amps| Resetting
type OLP
250V 50Hz, 2.4 Amps| Resetting
type OLP
250V 50Hz, 2.2 Amps| Resetting
type OLP
250V 50Hz, 3.2 Amps| Resetting
type OLP
250V 50Hz, 3.2 Amps| Resetting
type OLP
250V 50Hz, 2.2A / 3.2A
Capacity/material of Grinding jar| 1 Litre approx.
Stainless steel| 1 Litre approx.
Stainless steel| 1 Litre approx.
Stainless steel| 1 Litre approx.
Stainless steel| 0.8 Litre approx.
ronrtinwth ee: Lars)| 1 Litre approx. Stainless steel| 1 Litre approx. Stainless steel| 1 Litre approx. Stainless steel
Capacity/material
of Liquidising jar| 1.5 Litre approx Stainless steel| 1.5 Litre approx. Stainless steel| 1.5 Litre approx. Stainless steel| | 1.2 Litre approx. Stainless steel| 1.5 Litre approx. Stainless steel| | 1.2115Le approx. Stainless steel
Capacity/material of Chutney jar| 0.3 Litre PPM.| 03 Litre approx.| 0.3 Litre approx.| 03 liter approx.| 03 liter approx.| 0.3 Litre approx.| 0.3 Litre approx.| 0.3 Litre approx.
0.5 Litre approx.
(III” Ca° I 6X 301| –| –| –| –| –| –| –
Stainless steel| Stainless steel| Stainless steel| Stainless steel| Stainless steel| Stainless steel| Stainless steel| Stainless steel
Housing material| ABS plastic| ABS plastic| ABS plastic| ABS plastic| ABS plastic| ABS plastic| ABS plastic| ABS plastic
Dome lids for jar| Polycarbonate/ Polypropylene| Polycarbonate/ Polypropylene| Polycarbonate Polypropylene| Polycarbonate/ Polypropylene| Polycarbonate/ Polypropylene| Polycarbonate/ Polypropylene| Polycarbonate/ Polypropylene| Polycarbonate/ Polypropylene
Blade material| Stainless steel| Stainless steel| Stainless steel| Stainless steel| Stainless steel| Stainless steel| Stainless steel| Stainless steel
Power supply with cord & plug| PVC cable with Molded plug| PVC cable with Molded plug| PVC cable with Molded plug| PVC cable with Molded plug| PVC cable with Molded plug| PVC cable with Molded plug| PVC cable with Molded plug| PVC cable with Molded plug
Capacity/material of transparent Blender jar| | | | 1.25Litre approx. Polycarbonate| | 1.25 Litre approx. honoree
(Not for Twister 3 Jars & Swish )| 1.25litre approx. Polycarbonate|

Know your Bajaj Mixer Grindeer

  1. Main Unit

  2. Speed / Incher Selector Knob

  3. Liquidising Jar

  4. Lid for Liquidising Jar

  5. Jar Handle

  6. Flat Lid for Dry / Wet Grinding Jar

  7. Dry/ Wet Grinding Jar

  8. Jar Base

  9. Chutney Jar Lid

  10. Chutney Jar Small

  11. 2 in 1 function blade

  12. Liquidising Blade

  13. Chutney Blade

  14. Chutney Jar Big (Available with GX400 only)

  15. Chutney Jar Lid (Available with GX400 only)

  16. Main Unit

  17. Speed / Incher Selector Knob

  18. Liquidising Jar

  19. Dome for Liquidising Jar

  20. Dome cap for Liquidising Jar

  21. Jar Handle

  22. Lid for Dry/ Wet Grinding Jar

  23. Dry/ Wet Grinding Jar

  24. Jar Base

  25. Chutney Jar Lid

  26. Chutney Jar

  27. Dry / Wet Grinding Blade

  28. Liquidising Blade

  29. Cord Winder

  30. Chutney Blade

  31. Main Unit

  32. Speed / Incher Selector Knob

  33. Liquidising Jar

  34. Dome for Liquidising Jar

  35. Dome cap for Liquidising Jar

  36. Lid Clamp

  37. Jar Handle

  38. Flat Lid for Dry / Wet Grinding Jar

  39. Dry/ Wet Grinding Jar

  40. Jar Base

  41. Chutney Jar Lid

  42. Chutney Jar

  43. Spatula

  44. Chutney Blade

  45. Liquidising Blade

  46. Mincing Blade

  47. Dry Grinding Blade

  48. Main Unit

  49. Speed / Incher Selector Knob

  50. Liquidising Jar

  51. Lid for Liquidising Jar

  52. Lid cap for Liquidising Jar

  53. Lid Clamp

  54. Jar Handle

  55. Lid for Dry / Wet Grinding Jar

  56. Dry / Wet Grinding Jar

  57. Jar Base

  58. Chutney Jar Lid

  59. Chutney Jar

  60. Liquidising Blade

  61. Dry Grinding Blade

  62. Cord Winder

  63. Chutney Blade

  64. Main Unit

  65. Speed / Incher Selector Knob

  66. Liquidising Jar

  67. Lid for Liquidising Jar

  68. Jar Handle

  69. Lid for Dry / Wet Grinding Jar (only with REX 3 Jar)

  70. Dry/ Wet Grinding Jar ( only with REX 3 Jar)

  71. Jar Base

  72. Chutney Jar Lid

  73. Chutney Jar

  74. Multi-function Blade

  75. Liquidising Blade

  76. Chutney Blade

  77. Main Unit

  78. Speed / Incher Selector Knob

  79. Liquidising Jar tliolyrimo(Fano

  80. Dome for Liquidising Jarottion.swoon

  81. Dome cap for Liquidising Jar tilollonalerFrutY)

  82. Lid Clamp

  83. Jar Handle

  84. Flat Lid for Dry/ Wet Grinding Jar

  85. Dry/ Wet Grinding Jar

  86. Jar Base

  87. Chutney Jar Lid

  88. Chutney Jar

  89. Spatula (for Twister 4 jars & Twister 3 Jars )

  90. Chutney Blade

  91. Liquidising Blade

  92. Mincing Blade mit tor Twister Rudy & Servers )

  93. 4-Leaf Multifunctional blade

  94. Lid for Transparent Liquidising Jar(Not for Twister 3 Jars & Swish )

  95. Transparent Liquidising Jar (Not for Twister 3 Jars & Swish )

  96. Main Unit

  97. Speed / Incher Selector Knob

  98. Liquidising Jar

  99. Lid/Dome for Liquidising

  100. Jar Handle

  101. Flat Lid for Dry / Wet Grinding Jar

  102. Dry / Wet Grinding Jar

  103. Jar Base

  104. Chutney Jar

  105. Liquidising Blade

  106. Multi-function Blade

  107. Chutney Blade

PRECAUTIONS

PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY BEFORE USING THE MIXER GRINDER

  • Keep the Mixer Grinder at least 6″ (150mm) away from the wall and on the flat level surface.

  • Have sufficient place around the Mixer Grinder to keep the various items and ingredients required.

  • Do not touch moving parts & blades when the Mixer Grinder is in operation.

  • To protect against electrical hazards, do not immerse any part of the Mixer Grinder like the base, plug, or cord in water or any other liquids.

  • Keep the Mixer Grinder away from direct heat or sun, gas stove, or any electrical heating appliances.

  • Never operate your Mixer Grinder without lid and lid cap.

  • Never operate your Mixer Grinder unless there is a load in the jar.

  • Do not pull the cord to disconnect instead grasp the plug and pull to disconnect.

  • Always disconnect the plug from the power outlet before cleaning, while emptying and when not in use.

  • Do not let the power cord hang over the edge of the table/counter or touch any hot surface. If the plug or cord is damaged or the unit malfunctions, do not use it, contact the Bajaj consumer care center for repairs.

  • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.

  • Children should be supervised to ensure that they do not play with the appliance.

  • Keep the Mixer Grinder out of reach of children at all times. Close supervision is necessary when used near children.

  • In the event of any failure of your Mixer Grinder or cord damage, do not attempt to repair it at home or allow any unauthorized person to do so. Ensure repairs are carried out only at an authorized Bajaj Consumer care center.
    NOTE:

  • Parts Illustrated In this use and care manual are indicative only.

  • This mixer Grinder is intended for household use only.

  • Specifications are subject to change without notice.

INSTRUCTIONS TO USE YOUR BAJAJ MIXER GRINDER

Before you start the mixer grinder for the first time or after a long period of non-usage :

  • After unpacking the mixer grinder, wash the jars and blades with mild detergent and dry it throughly.
  • Rotate the motor shaft by hand to ensure that it turns freely & smoothly (Fig. 8). Make sure the unit is not connected to the electric supply source
  • Before fixing the jar to the main unit, rotate the jar coupler to ensure that it turns freely (Fig. 9)
  • Each jar comes fitted onto an aluminum/ plastic base that has to be fitted onto the main unit. Hold the base and rest it on the main unit (Fig 10)
  • Plug the power cord in the electric supply socket & switch the power ON.
  • The Speed of operations is marked as 1/2/3 or N1/N2/N3 in increasing order of speeds. Incher shall be used for momentary operation.
  • Do not touch the jars with bare hands immediately after using the mixer.

WARNING: Do not run the mixer grinder unless the lid is in place and held firmly with your hand.

INSTRUCTIONS TO USE CHUTNEY JAR

This jar (Fig.11) can be used to grind small quantities of jeera, dhania, coconut, green chili, pepper, garam masala, etc.

  • The substance to be ground should not be too large. Cut/break ingredients into smaller pieces.

  • Put the ingredients to the ground in the chutney jar.

  • Put the flat lid on top of the jar and fit it onto the main unit.

  • Place the chutney jar on the main unit through the jar base.

  • While using, hold the lid with your hand and press it down firmly on the jar, ensuring that the lid has locked securely from all sides.
    NOTE:

  • Do not add too much water while using this jar.

  • Do not run the mixer continously as it tends to rob the ingredients of their flavor – thus short spurts would be preferable.

  • While dry grinding, friction may heat up the jar, this is not abnormal.

INSTRUCTIONS TO USE DRY & WET GRINDING JAR

This jar ( Fig. 12) can be used for grinding items like Coffee beans, coconut chutney, groundnut, red chilli, sugar, palak, etc

  • Fill the jar with the ingredients, up to 2/3 of the capacity of the jar, and add some water as per the desired quantity.

  • Put the lid on the top of the jar and fit it onto the main unit.

  • While using, hold the lid with your hand and press it down firmly on the jar, ensuring that lid has locked securely from all sides.

  • Grind at a low speed for about 15 sec. And then move to higher Keep adding water till you achieve desired consistency.
    NOTE:

  • Always ensure lid is in place before starting.

  • Please add the water as and when required.

  • Start from the lowest speed and increase gradually.

INSTRUCTIONS TO USE BLENDING, LIQUIDIZING AND OPTIONAL JAR

This jar (fig. 13) can be used to perform all type of blending, liquidizing & wet grinding operations such as the preparation of lassi, milkshakes, purees, juices, Idli & Dosa batter etc.

  • Fill the jar with the solids to be liquidized such as tomatoes or watermelon and fit the jar onto the main unit.

  • Put the Dome Assembly onto the jar. Put the Dome Cap into place.

  • If needed more water can be added by removing Dome Cap.

  • While using ensure that the dome/lid has securely locked from all sides.

  • While using, hold the lid with your hand and press it down firmly on the jar, ensuring that the lid has locked securely from all sides.

  • Now switch on the mixer for under a minute and you will get finely blended juices and purees.
    Note:

  • Always ensure Dome Lid and Dome Cap are in place before starting

  • Use incher button for better results.

  • Use the handle of the jar for pouring out the contents.

HOW TO CARE FOR YOUR BAJAJ MIXER GRINDER

CLEANING AFTER USE
Warning: Be sure to switch off your Mixer Grinder after use. Wait until! the blades come to a halt before removing the cover.

  • After each use, it is highly desirable to wash and thoroughly clean the jar’s blades and the lids.
  • Firstly remove the power plug from the electric supply socket. Gently detach the jar from the main unit
  • Open the lid and empty the contents.
  • To remove the blade assembly, use a spoon to stop the blade from rotating and use a Spatula to gently loosen/unscrew the plastic dome nut of the blade assembly in a clockwise direction (Fig 14, only for GX10 DLX & Twister 3 Jar, 4 Jar)
  • The jars can be cleaned using some warm soapy water. Then rinse with clean water & wipe dry with a soft damp cloth. Do not keep the jars immersed in water.
  • Do not immerse the main unit in water. The main unit can be cleaned using a damp cloth.
  • Cleaning is easy & best done immediately after use.
  • Do not Operate or touch the unit when smoke/burnt smell is observed. Contact the authorized Bajaj Consumer Care Centre.

NOTE: Parts illustrated in this use and care manual are indicative only, parts provided with the product may differ with the illustrations.

OVERLOAD PROTECTOR (OLP)

  • The OLP is designed to protect your motor from burning.
  • When the jar is filled more than what is specified or the liquid is too viscous the OLP trips and the motor stops automatically.
  • When this happens, reduce the quantity of material being grounded or add some water,
  • To restart wait for a while and press the OLP button located at the bottom of the mixer base (Fig.16).
  • Wait for a while and then start your Mixer Grinder again.

NUTRI PRO

Tested for Sodium, Potassium, Calcium, Copper, Iron, Manganese, Phosphorous, Zinc, Vit A, Vit B3, Vit B5, Vit B9, Vit C. This is based on RPD (relative percentage difference) of less than 15%”

TROUBLESHOOTING GUIDE

Note: In case the following measures do not work, please take the Mixer Grinder to the nearest Bajaj authorized consumer care center

PROBLEM CAUSE CORRECTIVE ACTION
The mixer does not start No electric supply
Tripped due to overload Ensure electric supply

Switch off the electric supply.
Remove excess load and reset the OLP located at the bottom of the mixer base. (If it still does not work, contact the nearest Bajaj authorized
consumer care center.
The result/performance is not satisfactory| Overloading
The size of the ingredients is not proper
Wrong Jar / Blade used| Fill the Chutney Jar up to the level of blades & the other 2 jars up to 2/3 of the capacity level indicated.
Cut / Break down the ingredients to be ground into appropriate sizes.
Ensure that you are using the jar/blade for its right/intended
purpose.
Mixer generates abnormal noise| The jar is not locked properly
Blade assembly lose
Coupler lose| Lock the jar properly
Tighten the dome nut of blade assembly properly.
Tighten Coupler

CONSUMER CARE NO. 022-41280000
WWW.bajajelectricals.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals