Hard Head 012957 Work Trestle Instruction Manual

Item no. 012957
Instruction Manual

WORK TRESTLE
OPERATING INSTRUCTIONS
Important! Read the user instructions carefully before use. Save them for future reference. (Translation of the original instructions).

SAFETY INSTRUCTIONS

Read these instructions carefully before assembly and use them, and save them for future reference.

• Use the correct lifting technique when lifting the product to avoid personal injury.
• Only use the product in daylight, or in good artificial lighting.
• Place the product on a dry, level, and stable surface, free from debris and foreign objects.
• Check that the four legs rest firmly on the underlying surface. If the product does not stand upright there is a risk of the load put on it falling oft which could result in a fatal or serious personal injury, and/or material damage.
• Never exceed the maximum permitted load. Overloading can break the product and result in a risk of fatal or serious personal injury and/or material damage.
  • Do not stack several products on top of each other to get a higher working height.

IMPORTANT:

• The maximum permitted uniform load is 590 kg. Do not step or stand on the product.
• Uniformly distributed load.
  – The maximum permitted uniform load on the top rail applies to one product.
  – This is the maximum load that can be applied to this product as indicated on the stickers and in the instructions. A uniformly distributed load means that the full weight of the load is evenly distributed over the top rail. Two identical products can support twice this load. A pallet, or the equivalent, that weighs up to twice the permitted load can in other words be supported by two of these products.

WARNING!

• Read all the instructions carefully before use, to minimize the risk of personal injury.
• Lock the product legs in their extended position.
• Do not stand on the product.
• Do not overload the product. The maximum load is 590 kg.
• Only use the product on a level, dry and hard surface.

SYMBOLS

| Read the instructions.
---|---

TECHNICAL DATA

ASSEMBLY

1. Folded work trestle.
   FIG. 1

2. Press the catch to unfold the legs so that the top rail rests on the support plates (45 x 90 mm).
   FIG. 2

3. Pull the legs apart and press down the crossbar until it is straight.
   FIG. 3

4. Press the catch to unfold the legs so that the top rail rests on the support plates (45 x 90 mm).
   FIG. 4
   

5. Pull the legs apart and press down the crossbar until it is straight.
   FIG. 5

6. The legs can be adjusted in steps of 25 mm. To extend the legs, pull them out until the catch locks in the required position. To make the legs shorter, press the catch and pull out the leg a little and then press it in.
   FIG. 6

7. Two correctly unfolded and assembled work trestles can be used to support a work table that can support up to 1180 kg.
   FIG. 7

FOLDING

1. Fold the work trestle together by repeating steps five to two. Start with the last unfolded leg.
2. Check that the catches engage and lock the legs in the folded position.
   

Jula reserves the right to make changes.
For the latest version of operating instructions, see www.jula.com
JULA AB, BOX 363, SE-532 24 SKARA
2022-03-16
© Jula AB

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>