PONNOR B08Q3H2HQX Money Counter Machine 140x205mm User Manual
- June 3, 2024
- PONNOR
Table of Contents
PONNOR B08Q3H2HQX Money Counter Machine 140x205mm
PREFACE
- Thank you for purchasing PONNOR bill counter.
- This user guide compiles all the relevant instructions about the use and operation of the machine.
- We recommend the new user to read the manual thoroughly, in order to get familiarized with the controls and operation of the unit.
GENERAL INTRODUCTION
The bill counter is the perfect solution for a fast, accurate and reliable banknote counting process. This machine is the vanguard of our evolution in currency counting technology. Its compact and stylish design is as remarkable as its integrated electronics and multi-function capabilities. But it is more than just looks and hi-tech electronics. It is ready to process the most demanding tasks, from counting large amounts of cash, to batching custom money quantities. The power to dramatically reduce labor and counting losses is now at the reach of your hands. This machine makes an invaluable aid in banks, casinos, supermarkets, movie theaters, retail shops and many other environments where banknotes are used. When opening the box, verify that all of the items described below are included. If any item is damaged or missing, contact the dealer where the unit was purchased.
- Machine
- User manual
- Power cord
- Cleaning brush
- Fuse
- External display (optional)
IMPORTANT SAFETY INSTRUCTIONS
When using this money counter, basic safety precautions should always be
followed to reduce the risk of fire, electric shock or injury to persons;
including the following:
WARING
| Do not use this product in areas where it may be exposed to water or other
liquids.
---|---
| Unplug this product from the wall outlet before cleaning. Do not use liquid
or aerosol cleaners. Use a damp cloth for cleaning.
| To reduce the risk of electric shock, do not disassemble
this product. Take it to qualified service personnel when service or repair
work is required. Opening or removing covers -like the rear cover plate- may
expose you to dangerous voltages or other risks. Incorrect re-assembly can
cause electric shock when the appliance is subsequently used.
| Only use the cable provided with the unit. The use of other cables may
result in electric shock, fire or cause serious damage to the unit.
---|---
| Do not operate the unit in areas with high temperature or high humidity
since it may prevent it from working correctly.
CAUTION
| When unplugging the power plug, do not pull it by the cord
but rather grip the plug to pull it out. Not following these instructions may
result in electric shock, fire or damage to the unit.
---|---
| Do not use the unit if the power cord is damaged or if the plug socket
contact is loose. Not following these instructions may result in electric
shock, fire or other hazards.
| Do not place heavy objects over the cord and do not bend it excessive- ly
since it could get damaged. Not following these instructions may result in
electric shock, fire or other hazards.
| When not using the unit for a long period of time, remove the power plug
from the wall outlet.
OPERATION METHOD
Connect the power cord to the machine, then to a power source and turn the power switch on; the machine will conduct a self-check by spinning the counting wheels several times. The counting number display will show “0” when the machine is ready. To avoid wrong detecting, please check and take out the banknotes before counting which are as following:
- Mended notes with paper
- Washed notes
- Very dirty notes
- Broken notes
CORRECT FEEDING OF BANKNOTES
Banknotes need to be put orderly and placed between the counting guides,
please refer to the following pictures:
Method One: Method Two:
CONTROL PANEL INTRODUCTION
- “UV” button: press it to turn on/off the UV detection.
- “MG” button: press it to turn on/off the MG detection.
- “IR” button: press it to turn on/off the IR detection.
- “DD” button: press it to turn on/off the DD detection.
- “VALUE” button: press it to enter total value calculation mode and choose denomination. “CUR” button: press it to choose other currency such as USD, EUR.
- “BATCH” button: press it to turn on/off the BATCH function.
- “ADD” button: press it to turn on/off the ADD function.
- “MNL” button: press it to choose MANUAL or AUTO counting mode.
- “SET” button: press it to enter sensitivity adjustment of sensors.
- “+” button: when in SET mode, press “+” once to add “1”. If you keep pressing continuously, the parameter number will be added continuously. When in total value calculation mode, press “+” to choose denomination.
- “-” button: when in SET mode, press “-” once to reduce “1”. If you keep pressing continuously, the parameter number will be reduced continuously. When in total value calculation mode, press “-” to choose denomination.
- -“START” button: press it to clear the counting number.
FUNCTIONS INTRODUCTION
UV (Ultraviolet) Detection Function –
The UV detection function is selected or deselected by pressing the UV button
in the function console. The UV function is able to check all types of
banknotes which contain UV features. By default, the UV function is
automatically turned on when the unit is powered up. If the machine detects a
counterfeit money, it will stop counting and emit beeping sound. The display
will show the message “A or E10”, alerting the user of the presence of a
suspicious money. Remove the counterfeit money and press “START” to continue
counting.
MG (Magnetic) Detection Function
The MG detection function is selected or deselected by pressing the MG button
in the function console. The MG function is able to check all types of
banknotes which contain MG features. By default, the MG function is
automatically turned on when the unit is powered up. If the machine detects a
counterfeit money, it will stop counting and emit beeping sound. The display
will show the message “b or E6X” , alerting the user of the presence of a
suspicious money. Remove the suspicious money and press “START” to continue
counting.
IR (Infrared) Detection Function
The IR detection function is selected or deselected by pressing the IR button
in the function console. The IR detection is used to detect double-note. By
default, the IR function is automatically turned on when the unit is powered
up. If the machine detects a double-note, it will stop counting and emit
beeping sound. The display will show the message “d or EC0”, alerting the user
of the presence of a suspicious money. Remove the counterfeit money and press
“START” to continue counting.
DD Detection Function
The DD detection function is selected or deselected by pressing the DD button
in the function console. The DD detection is used to detect the banknote with
different width.
Through this function, the width of the first counted banknote will be
memorized, and if a wider one or narrower one is detected (width difference
must be more than 5mm), it will stop counting and emit beeping sound. The
display will show the message “dd or E8X”, alerting the user of the presence
of a suspicious money. Remove the counterfeit money and press “START” to
continue counting.
Total Value Calculation Function
The Total Value Calculation function is selected or deselected by pressing the
VALUE button in the function console. Keep pressing VALUE button for 2 seconds
to exit this function.
Through this function, the user need to press VALUE button to choose
denomination one by one. Take US dollar as example, first press is 100 dollar,
second press is 50 dollar, third press is 20 dollar, fourth press is 10
dollar, fifth press is 5 dollar, sixth press is 2 dollar, seventh press is 1
dollar. For example, when you choose 100 dollar and count 10pcs of 100 dollar,
the display will show total value 1000 dollar. Please note that when you
choose 100 dollar, please must count 100 dollar, because if you put other
denomination such as 50 dollar or 20 dollar etc, machine also will memorize it
as 100 dollar. Under total value calculation function, the user can turn on
ADD function if want to calcu late total value of different denominations, so
user can press VALUE button or “+” “-” button- to choose denomination
accordingly and the total value will be added.
Automatic or Manual Start Mode Function
- Automatic Start Mode: The machine begins counting automatically when banknotes are placed in the hopper.
- Manual Start Mode: Press “START” button to start counting after banknotes are placed in the hopper.
Batch Function
The batch function can be selected or deselected by pressing the “Batch”
button. The batch number will show on batch display.
First Press: the batch number is 100
Second Press: the batch number is 50
Third Press: the batch number is 20
Fifth Press: the batch function is canceled.
Fourth Press: the batch number is 10
The custom quantity can be set by pressing “+” or “-” button to increase or
decrease the batch number. If keep pressing “+” or “-” button for about 2
seconds, the batch number can increase or decrease continuously. If the
machine has number keys, you can set the batch number much more convenient. To
clear this function, press the “BATCH” button until the-indicator is off.
Under the batch counting mode, once the hopper is loaded, the machine will
start count ing and will stop when the counted quantity reaches the preset
batch quantity. To repeat the batch counting operation under the same preset
batch quantity, just remove the counted banknotes from the stacker. The
machine will batch the next group of banknotes under the same settings. If you
wish to keep batching without removing the banknotes from the stacker, press
the “START” button.
ADD Function
Add function can be can be selected or deselected by pressing the “ADD”
button. In this case, the next banknotes placed in the hopper will be counted
and added to the previous counted quantity. The total number of added
banknotes will be shown on display. To close the function, press “ADD” button
again.
( Note: this function is only available for single denomination, no
mixed denomination)
Half-note Detection Function
The half-note detection is automatically turned on by default when the machine
is powered up. If the machine detects a half-note when counting, it will stop
and emit beeping sound, while the display will show the message “H or E4X”,
alerting the user the presence of a suspicious note. Remove the suspicious
note and press “START” button to continue counting. Please note that the
suspicious money will be added to the counted quantity.
Chained-note Detection Function
The chained-note detection is automatically turned on by default when the
machine is powered up. If the machine detects a chained-note when counting, it
will stop and emit beeping sound, while the display will show the message “C
or E8X” , alerting the user the presence of a suspicious note. Remove the
suspicious note and press “START” button to continue counting. Please note
that the suspicious money will be added to the counted quantity.
Double-note Detection Function
The double-note detection is automatically turned on by default when the
machine is powered up. If the machine detects a double-note when counting, it
will stop and emit beeping sound, while the display will show the message “d
or EC0” , alerting the user the presence of a suspicious note. Remove the
suspicious note and press “START” button to continue counting. Please note
that the suspicious money will be add to the counted quantity.
HOPPER PLATE ADJUSTMENT
When banknote feeding is unsmooth or banknote counting is inaccurate, it can be solved through adjusting the vertical adjusting screw as well as the gap between resistance rubber and rubber wheel. Then you can put in a banknote and hold, if you feel the pull, the machine is workable. Turn it clockwise to decrease gap in order to add friction (tight). Turn it anticlockwise to increase gap in order to reduce friction (loose).
ERROR CODE AND SOLUTION
The display may show error code when counting, which means there is problem with the machine. Refer to the following sheet to find way to solve it.
Error Code | Reason | Solution |
---|---|---|
E10 | Fake note detected by UV | Remove the fake note from the stacker, press |
“START” to continue
E6X| Fake note detected by MG| Remove the fake note from the stacker, press
“START” to continue
EC0| Double note detected by IR| Remove the double note from the stacker,
press “START” to continue
E8X| Chain note or different width note detected| Remove the suspicious note
from the stacker, press “START” to continue
E4X| Half note detected| Remove the half note from the stacker, press “START”
to continue
CE1| Problem with the UV sensor| Clean the sensor or replace it
CE2| Problem with code disc sensor or big motor| Replace the sensor or big
motor
CE3| Problem with left counting sensor| Clean the sensor or replace it
CE4| Problem with right counting sensor| Clean the sensor or replace it
CE5| Problem with hopper sensor| Clean the sensor or replace it
CE7| Problem with MG sensor| Replace the MG sensor
CE8| Problem with stacker sensor| Clean the sensor or replace it
Generally speaking, most of the above mentioned problems may be caused by dust or dirt inside of the machine. So keeping the machine clean is highly recommended.
MAINTENANCE
- Do not operate the unit in areas with high temperature or high humidity since it may cause the machine refuse to work or prevent it from counting accurately.
- When not use the unit for a long period of time, remove the power plug from the wall outlet.
- Never operate the unit under strong light.
- Clean the machine frequently after switching off and unplugging of the machine.
- Do not use this product in areas where it maybe exposed to water or other liquids.
- Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaner. Use a damp cloth for cleaning.
FEATURES AND SPECIFICATIONS
Features:
Automatic start, stop and clear With UV(ultraviolet), MG(magnetic) and IR
(infrared) detection while counting Automatic half-note, chained-note, double-
note detection
With batch, add and self-examination function LCD color change to red when
detect fake note Total Value Calculation Function: choose denomination
manually and display will show total value after counting corresponding
banknotes Suitable for most currencies in the world
Specifications:
Model: | AL-5100 |
---|---|
Ambient Temperature: | 0°C – 40°C |
Ambient Humidity: | 25% – 80% |
Feeding System: | Roller Friction System |
Hopper Capacity: | 300pcs |
Stacker Capacity: | 200pcs |
Size of Countable banknotes: | MIN: 50x110mm MAX: 90x180mm |
Thickness of Countable banknotes: | 0.075mm – 0.15mm |
Counting Display: | 4 digits |
Batch Display: | 3 digits |
Power Supply: | AC110V±10% 50HZ |
Power Consumption: | ≤80 Watts |
WARRANTY
PONNOR provides 18-Months Warranty on all products starting from the date of original purchase. If the product has any manufacturing defect, please contact our customer service via email: service-ponnor@outlook.com with your order number and other details to the problem. We will promptly help to solve your problem!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>