CKMOVA Vocal X 2.4G Dual Channel Wireless Microphone User Manual

CKMOVA -Vocal -X 2.4G Dual -Channel- Wireless -Microphone

Introduction

The Vocal X is a ultra-compact 2-persoan digital wireless microphone system. It offers entire solution for interviews, dialogue, live streaming, speech with two people simultaneously, and work with Mirrorless & DSLR camera, smartphone, computer, mixer and much more. The System boasts a range of powerful features , including 3.5mm headphone output, switchable Mono & Stereo, switchable Mic & Line input and OLED display on transmitter & receiver. The clip-on transmitter is compact & lightweight to directly clip on clothing and shirts, with built-in omnidirectional microphone and a external AC-VM1/VM1W lavalier microphone for multiple recording scenarios. The CKMOVA is able to provide mature and stable 2.4GHz technical solutions to ensure stable signal transmission and deliver high-quality audio, it makes Vocal X become the clients priority choice.

Available Combo

• Vocal X V1 (TX+RX):                One Transmitter + 3.5mm Receiver
• Vocal X V2 (TX+TX+RX):                      Two Transmitters + 3.5mm Receiver
• Vocal X V1W (TXW+RXW):           One Transmitter + 3.5mm Receiver
• Vocal X V2W (TXW+TXW+RXW): Two Transmitters + 3.5mm Receiver
  Noted: : If using an Android phone, please set the “OTG Connection” to “ON.” The OTG connection menu is usually in the “Additional Settings” in your phone setting menu

Highlights

• Ultra-compact broadcast quality 2.4G wireless microphone system
• Dual channel receiver for camera, mobile devices, computer, mixers and etc
• OLED display on both transmitter and receiver
• 100M stable working distance(without obstacles)
• 5 ms Low latency
• Mono & Stereo output switchable
• 3.5mm headphone real-time monitor
• Mic & Line Input switchable
• Internal & External Mic selectable
• 10 hours battery life with Type-C charging port

Quick Start Guide

1. Long press for 3 seconds to turn on Transmitter and Receiver Factory default is paired.
2. If not paired, follow the below pairing instructions Long press Pair button on Transmitter for 3 seconds, then icon will be flashed that mean entering Pairing mode, then long press Pair button on Receiver for 3 seconds with the same entering Pairing. If paired the transmitter and receiver will exit from Pairing model, the icon will be fixed on screen. Meanwhile the receiver display will show transmitter battery indicator, mic gain level
3. Connect the Receiver to camera, mixer with supplied TRS to TRS output cable, connect smartphone supplied TRS to TRRS output cable, or other devices with the correct output cable
4. The receiver should now be connected to the transmitters. To check, you can connect headphones to headphone monitor on receiver and listen for audio

For a more detailed description of component controls, functions and setup, please continue reading this manual.

Product Structure

Vocal X TX/TXW: Beltpack Transmitter

1. Power & Mute Button Power On & Off : Long press button for 3 seconds Mute On & Off: Short press button
2. Set & Pair Button Set Function: Short press button to enter the function  control interface. Then short press button to confirm. Pair Function: Long press button to enter the pairing model, if paired then automatically exit. When already paired, long press button transmitter disconnect with receiver, long press again then connect and exit.
3. “+” Button Short press button to select different function
4. “-” Button Short press button to select different function
5. Type-C Charging Port
6. OLED Display Display details refer to “OLED Display Readouts”
7. Built-in Microphone
8. Mic & Line Input 3.5mm Microphone input and Line input
9. Belt Clip

Vocal X RX/RXW: Clip-On Receiver

1. Power & Mute Button Power On & Off : Long press button for 3 seconds Mute On & Off: Short press button
2. Set & Pair Button Set Function: Short press button to enter the function control interface. Then short press button to confirm. Pair Function: Long press button to enter the pairing model, if paired then automatically exit. When already paired, long press button receiver disconnect with both transmitters, long press again then connect and exit.
3. “+” Button Short press button to select different function
4. “-” Button Short press button to select different function
5. Type-C Charging Port
6. OLED Display Display details refer to “OLED Display Readouts”
7. 3.5mm Headphone Output Connect a headphone to monitor the audio output
8. 3.5mm Line Output Output to DSLR camera, camera recorder, smartphone, mixer, recorder and amplifier
9. Belt Clip

Vocal X HM: Handheld Holder For Transmitter

OLED Display Readouts OLED Display Introduction( TX/TXW Transmitter)

Home Screen
If no any operation within 5 seconds, the display automatically return to the home screen

1. RF Level Indicator
2. Pairing Indicator : Paired If without this icon will be disconnected
3. Battery Level Indicator Please recharge device when the indicator start flashing for low power reminding
4. Audio Input Dynamic Bar
5. Group Channel Default is A Channel
6. Mic Gain
7. Input Mode

Backlight Mode Screen Backlight with 3 level: ‘’ON’’ for long light; ‘’30S’’ for 30s light; ‘’60S’’ for 60s light Default is ON
Restore Screen

Yes: Restore factory default NO: Exit without any operation

Specifications

Packing List

Vocal X V1

• Vocal X RX receiver *1
• Vocal X TX transmitter *1
• 3.5mm TRS to TRS output cable *1
• 3.5mm TRS to TRRS output cable *1
• Built-in mic windscreen furry *1
• AC-VM1 omnidirectional lavalier microphone 1 Type-C to Type-A charging cable 2
• Storage bag *1
• User Manual *1
• Warranty Card *1

Vocal X V2

• Vocal X RX receiver *1
• Vocal X TX transmitters *2
• 3.5mm TRS to TRS output cable *1
• 3.5mm TRS to TRRS output cable *1
• Built-in mic windscreen furry *2
• AC-VM1 omnidirectional lavalier microphone 2 Type-C to Type-A charging cable 3
• Storage bag *1
• User Manual *1
• Warranty Card *1

Vocal X V1W

• Vocal X RX receiver *1
• Vocal X TX transmitter *1
• 3.5mm TRS to TRS output cable *1
• 3.5mm TRS to TRRS output cable *1
• Built-in mic windscreen furry *1
• AC-VM1W omnidirectional lavalier microphone 1 Type-C to Type-A charging cable 2
• Storage bag *1
• User Manual *1
• Warranty Card *1

Vocal X V2W

• Vocal X RX receiver *1
• Vocal X TX transmitters *2
• 3.5mm TRS to TRS output cable *1
• 3.5mm TRS to TRRS output cable *1
• Built-in mic windscreen furry *2
• AC-VM1W omnidirectional lavalier microphone 2 Type-C to Type-A charging cable 3
• Storage bag *1
• User Manual *1
• Warranty Card *1

Shenzhen Shenyao Technology Co., Ltd
CKMOVA is the trademark of Shenzhen Shenyao Technology Co., Ltd Add: Floor 6, 38th Building, BaoNan Street, LongGang District, Shenzhen Guangdong, China Email: www.ckmova.com Web: www.ckmova.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>